SIST EN 2829:2001
(Main)Aerospace series - Adhesion test for metallic coatings by shot peening
Aerospace series - Adhesion test for metallic coatings by shot peening
This standard specifies a test method to determine the adhesion of coatings by shot peening. It applies to ductile metal coatings, such as cadmium, silver or copper, with a hardness: - inf to 250 HV for a coating thickness between 25 and 250 micro m ; - sup or equal to 250 HV for a coating thickness between 10 and 60 micro m. It shall be applicable whenever referenced.
Luft- und Raumfahrt - Prüfung der Haftfestigkeit von metallischen Beschichtungen durch Kugelstrahlen
Diese Norm legt das Prüfverfahren zur Bestimmung der Haftfestigkeit von Beschichtungen durch Kugelstrahlen fest. Sie ist für Beschichtungen mit duktilen Metallen, wie z.B. Kadmium, Silber oder Kupfer, anzuwenden, mit einer Härte: kleiner als 250 HV bei einer Schichtdicke von 25 bis 200 micro m; - grösser und gleich als 250 HV bei einer Schichtdicke von 10 bis 60 micro m. Sie ist anzuwenden, wenn auf sie Bezug genommen wird.
Série aérospatiale - Essai d'adhérence des revetements métalliques par martelage
La présente norme spécifie la méthode d'essai pour déterminer l'adhérence des revêtements par martelage. Elle s'applique aux revêtements métalliques ductiles, comme par exemple le cadmium, l'argent ou le cuivre, de dureté: - inf à 250 HV pour une épaisseur de revêtement de 25 à 200 micro m; - sup ou égale à 250 HV pour une épaisseur de revêtement de 10 à 60 micro m.
Aerospace series - Adhesion test for metallic coatings by shot peening
General Information
- Status
- Published
- Publication Date
- 31-May-2001
- Technical Committee
- SS SPL - Technical Board for the general field
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jun-2001
- Due Date
- 01-Jun-2001
- Completion Date
- 01-Jun-2001
Overview
SIST EN 2829:2001 defines a standardized method for evaluating the adhesion of metallic coatings applied to aerospace components through shot peening. Developed by the Slovenski inštitut za standardizacijo (SIST), this European standard outlines a consistent procedure to ensure the reliability and integrity of ductile metal coatings such as cadmium, silver, and copper used within the aerospace sector. By following these guidelines, manufacturers and quality assurance professionals can accurately assess coating adhesion, supporting safety, performance, and traceability in critical aerospace applications.
Key Topics
Scope of the Standard
- Applies to ductile metal coatings including cadmium, silver, and copper
- Relevant for coatings with a hardness:
- Below 250 HV, for coating thickness between 25 and 250 micrometres
- 250 HV and above, for coating thickness between 10 and 60 micrometres
Test Method
- The standard specifies a shot peening technique to test adhesion
- Ensures reproducibility and comparability of results across different manufacturers
Quality and Reliability
- Reinforces the importance of adhesion in preventing coating failures
- Supports the aerospace industry's strict requirements for performance and safety
Applications
Adhering to SIST EN 2829:2001 provides practical benefits across aerospace manufacturing and maintenance sectors:
Product Qualification
- Used during the approval process for coated aerospace parts to confirm adhesion performance
- Supports compliance with international and European aerospace regulations
Process Validation
- Helps validate and refine surface treatment processes such as electroplating and coating application techniques
- Facilitates monitoring and improvement of quality control measures
Component Maintenance
- Assists in routine inspection and certification of coated parts in aircraft, ensuring ongoing safety and reliability
- Enables detection of insufficient adhesion, helping to prevent in-service failures
Research and Development
- Aids in the development of new coating materials and application processes by providing a standardized adhesion test
Related Standards
When working with metallic coating adhesion in the aerospace industry, the following standards are also relevant:
- EN 2829:1994 - The equivalent European standard upon which SIST EN 2829:2001 is based
- EN ISO 4524 - Methods for testing the adhesion of metall coatings
- ISO 2093 - Electroplated coatings of cadmium on iron or steel
- EN 12373 - Series covering aluminum and aluminum alloys - methods for assessment of surface treatments
Summary
Complying with SIST EN 2829:2001 ensures the consistent and accurate assessment of metallic coating adhesion by shot peening, critical to aerospace safety and performance. By providing standardized test methods, the standard helps manufacturers, maintenance organizations, and research institutions achieve high-quality, reliable coatings for aerospace components. Usage of this standard supports regulatory compliance, extends component life, and facilitates innovation in coating technologies, making it a vital reference in aerospace coatings and materials engineering.
Get Certified
Connect with accredited certification bodies for this standard
BUREAU VERITAS Certification Germany
Bureau Veritas certification in Germany.
Element Materials Technology
Materials testing and product certification.
AQMS Ltd.
AQMS provides ISO certification to SMEs across the UK.
Sponsored listings
Frequently Asked Questions
SIST EN 2829:2001 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Adhesion test for metallic coatings by shot peening". This standard covers: This standard specifies a test method to determine the adhesion of coatings by shot peening. It applies to ductile metal coatings, such as cadmium, silver or copper, with a hardness: - inf to 250 HV for a coating thickness between 25 and 250 micro m ; - sup or equal to 250 HV for a coating thickness between 10 and 60 micro m. It shall be applicable whenever referenced.
This standard specifies a test method to determine the adhesion of coatings by shot peening. It applies to ductile metal coatings, such as cadmium, silver or copper, with a hardness: - inf to 250 HV for a coating thickness between 25 and 250 micro m ; - sup or equal to 250 HV for a coating thickness between 10 and 60 micro m. It shall be applicable whenever referenced.
SIST EN 2829:2001 is classified under the following ICS (International Classification for Standards) categories: 49.040 - Coatings and related processes used in aerospace industry. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 2829:2001 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Adhesion test for metallic coatings by shot peeningLuft- und Raumfahrt - Prüfung der Haftfestigkeit von metallischen Beschichtungen durch KugelstrahlenSérie aérospatiale - Essai d'adhérence des revetements métalliques par martelageAerospace series - Adhesion test for metallic
...