iTeh Standards logo
EURUSD
Your shopping cart is empty.
SIST

SIST EN 62841-3-4:2016/AC:2017

(Corrigendum)

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016/COR1:2016)

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016/COR1:2016)

IEC corrigendum

Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 3-4: Besondere Anforderungen für transportable Tischschleifmaschinen (IEC 62841-3-4:2016/COR1:2016)

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 3-4: Exigences particulières pour les tourets à meuler transportables (IEC 62841-3-4:2016/COR1:2016)

Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-4. del: Posebne zahteve za prenosne namizne brusilnike (IEC 62841-3-4:2016/COR1:2016) - Popravek AC

General Information

Status
Published
Publication Date
06-Feb-2017
ICS
25.080.50 - Grinding and polishing machines
25.140.20 - Electric tools
Technical Committee
I09 - Imaginarni 09
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2017
Due Date
08-Apr-2017
Completion Date
07-Feb-2017
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
EN 62841-3-4:2016/AC:2017-01 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
SIST EN 62841-3-4:2016/AC:2017SIST EN 62841-3-4:2016/AC:2017
PreviousNext
Corrigendum
SIST EN 62841-3-4:2016/AC:2017
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 3-4: Besondere Anforderungen für transportable Tischschleifmaschinen (IEC 62841-3-4:2016/COR1:2016)Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 3-4: Exigences particulières pour les tourets à meuler transportables (IEC 62841-3-4:2016/COR1:2016)Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016/COR1:2016)25.140.20Electric tools25.080.50Brusilni in polirni strojiGrinding and polishing machinesICS:Ta slovenski standard je istoveten z:EN 62841-3-4:2016/AC:2017-01SIST EN 62841-3-4:2016/AC:2017en01-april-2017SIST EN 62841-3-4:2016/AC:2017SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 62841-3-4:2016/AC:2017-01
January 2017
ICS 25.140.20 English Version
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016/COR1:2016)
Outils électroportatifs à moteur, outils portables et machinespour jardins et pelouses - Sécurité - Partie 3-4: Exigences particulières pour les tourets à meuler transportables (IEC 62841-3-4:2016/COR1:2016)
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 3-4: Besondere Anforderungen für transportable Tischs
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

SIST
SIST EN 62841-3-4:2016/A1:2020(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016/A1:2019)
EN 62841-3-4:2016/A1:2020

Next steps: the formal vote of the European Amendment
2019-08-08 JF: The Annex ZZ was delivered after the Enquiry started. The need to adapt the Annex ZZ.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-3-4:2016/A12:2020(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
EN 62841-3-4:2016/A12:2020

2018-11-02: this prA covers common mods to EN 62841-3-4:2016/prA1:2018 (pr=67898)

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-3-4:2016/A11:2018(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
EN 62841-3-4:2016/A11:2017

This standard applies to transportable bench grinders that can be equipped with one or two accessories as follows:
- type 1 grinding wheels in accordance with ISO 603-4 with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm;
- wire brushes with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm;
- polishing wheels with a diameter not exceeding 310 mm;
and with a peripheral speed of any accessory between 10 m/s and 50 m/s.
NOTE Polishing wheels are also known as buffing wheels.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50632-2-3:2016(Main)
Electric motor-operated electric tools - Dust measurement procedure - Part 2-3: Particular requirements for concrete grinders and disk-type sanders
EN 50632-2-3:2016

1.1   General
This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.
1.2   Types of dust
Dust is a disperse distribution of solid substances in gases, particularly air, resulting from mechanical processes. According to EN 481, two size categories are to be differentiated: the inhalable dust and the respirable dust fraction. Inhalable dust refers to the entire inhalable fraction of the dust through mouth and/or nose. Respirable dust relates to the fraction of the inhalable dust that can reach the pulmonary alveoli due to its small particle size.
This part of EN 50632 applies to concrete grinders and disc-type sanders.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-3-4:2016(Main)
Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016)
EN 62841-3-4:2016

IEC 62841-3-4:2016 applies to transportable bench grinders that can be equipped with one or two accessories as follows:
- type 1 grinding wheels in accordance with ISO 603-4:1999 with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm;
- wire brushes with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm;
- polishing wheels with a diameter not exceeding 310 mm and with a peripheral speed of any accessory between 10 m/s and 50 m/s. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication
Keywords: Bench Grinder, Hand-held tool, Transportable tool
This publication is to be read in conjunction with IEC 62841-1:2014.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50632-2-4:2016(Main)
Electric motor-operated electric tools - Dust measurement procedure - Part 2-4: Particular requirements for sanders other than disk type
EN 50632-2-4:2016

1.1   General
This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.
1.2   Types of dust
Dust is a disperse distribution of solid substances in gases, particularly air, resulting from mechanical processes. According to EN 481, two size categories are to be differentiated: the inhalable dust and the respirable dust fraction. Inhalable dust refers to the entire inhalable fraction of the dust through mouth and/or nose. Respirable dust relates to the fraction of the inhalable dust that can reach the pulmonary alveoli due to its small particle size.
This part of EN 50632 applies to sanders with the exception of all types of rotating disc-type sanders, which are covered by EN 50632-2-3.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-2-4:2014/AC:2016(Corrigendum)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4:2014, modified)
EN 62841-2-4:2014/AC:2015

IEC corrigendum

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-2-4:2014(Main)
Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type
EN 62841-2-4:2014

IEC 62841-2-4:2014 applies to hand-held sanders and polishers with the exception of disc-type tools covered by IEC 62841-2-3. Tools covered by this standard include but are not limited to belt sanders, drum sanders or polishers, reciprocating sanders or polishers, orbital sanders or polishers and random orbit sanders or polishers. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools is given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication.
Key words: Sander, Polisher, Belt, Drum Orbital, Reciprocating, Random Orbit
This publication is to be read in conjunction with IEC 62841-1:2014.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60745-2-23:2013(Main)
Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for die grinders and small rotary tools
EN 60745-2-23:2013

IEC 60745-2-23:2012 applies to die grinders and small rotary tools for mounted accessories not exceeding 55 mm in diameter and mounted sanding accessories not exceeding 80 mm in diameter such as, threaded cones or plugs that are threaded on a mandrel with an unrelieved shoulder flange, mandrel mounted wheels and rotary files with a rated speed not exceeding a peripheral speed of the accessory of 80 m/s at rated capacity. This part 2 is to be used in conjunction with the latest edition of IEC 60745-1 and its amendments. It was established on the basis of the fourth edition (2006) of that standard. This standard does not apply to straight and vertical grinders utilizing flanges for driving an abrasive accessory. Those tools are covered by IEC 60745-2-3. Keywords: Die grinders, rotary tools, grinding, sanding.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60745-2-3:2011/oprAA:2013(Amendment)
Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
EN 60745-2-3:2011/prAA:2012

2012-10-04 - Enquiry editing allocated to aclausse@cencenelec.eu
D140/C009: NWI approved  * ENQ + FV track * In hands of newly set up WG 4

  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day