SIST EN ISO 5395-2:2014/A2:2017

SLOVENSKI STANDARD
01-julij-2017
2SUHPD]DQHJRYUWD9DUQRVWQH]DKWHYH]DPRWRUQHYUWQHNRVLOQLFHGHO
5RþQRYRGHQHYUWQHNRVLOQLFH'RSROQLOR$.RVLOQLFH]]DSUWLPLYDURYDOL
'RSROQLOR$,62$PG
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers -
Part 2: Pedestrian-controlled lawnmowers - Amendment 2: Cutting means enclosure
guards (ISO 5395-2:2013/Amd 2:2017)
Gartengeräte - Sicherheitsanforderungen für verbrennungsmotorisch angetriebene
Rasenmäher - Teil 2: Handgeführte Rasenmäher, Änderung 2:
Schneidwerkzeugabdeckung (ISO 5395-2:2013/Amd 2:2017)
Matériel de jardinage - Exigences de sécurité pour les tondeuses à gazon à moteur à
combustion interne - Partie 2: Tondeuses à gazon à conducteur à pied - Amendement 2
(ISO 5395-2:2013/Amd 2:2017)
Ta slovenski standard je istoveten z: EN ISO 5395-2:2013/A2:2017
ICS:
65.060.70 Vrtnarska oprema Horticultural equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 5395-2:2013/A2
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2017
EUROPÄISCHE NORM
ICS 65.060.70
English Version
Garden equipment - Safety requirements for combustion-
engine-powered lawnmowers - Part 2: Pedestrian-
controlled lawnmowers - Amendment 2: Cutting-means-
enclosure guards (SO 5395-2:2013/Amd 2:2017)
Matériel de jardinage - Exigences de sécurité pour les Gartengeräte - Sicherheitsanforderungen für
tondeuses à gazon à moteur à combustion interne - verbrennungsmotorisch angetriebene Rasenmäher -
Partie 2: Tondeuses à gazon à conducteur à pied - Teil 2: Handgeführte Rasenmäher, Änderung 2:
Amendement 2: Enceintes de protection des organes Schneidwerkzeugabdeckung (SO 5395-2:2013/Amd
de coupe (SO 5395-2:2013/Amd 2:2017) 2:2017)
This amendment A2 modifies the European Standard EN ISO 5395-2:2013; it was approved by CEN on 8 March 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5395-2:2013/A2:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Annex ZA (informative)  Relationship between this European Standard and the essential
requirements of EU Directive 2006/42/EC amended by Directive 2009/127/EC
aimed to be covered . 4
European foreword
This document (EN ISO 5395-2:2013/A2:2017) has been prepared by Technical Committee ISO/TC 23
“Tractors and machinery for agriculture and forestry” in collaboration with Technical Committee
CEN/TC 144 “Tractors and machinery for agriculture and forestry” the secretariat of which is held by
AFNOR.
This Amendment to the European Standard EN ISO 5395-2:2013 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by November 2017,
and conflicting national standards shall be withdrawn at the latest by November 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 5395-2:2013/Amd 2:2017 has been approved by CEN as EN ISO 5395-2:2013/A2:2017
without any modification.
Replace Annex ZA by the following:
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of EU Directive 2006/42/EC amended by Directive
2009/127/EC aimed to be covered
This European Standard has been prepared under Commission’s standardization request M/396
mandate to CEN and CENELEC for standardisation in the field of machinery to provide one voluntary
means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC of the
European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive
95/16/EC (recast) amended by Directive 2009/127/EC of the European Parliament and of the Council
of 21 October 2009 amending Directive 2006/42/EC with regard to machinery for pesticide application
(Text with EEA relevance).
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding Essential Requirements
of that Directive and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.
Table ZA.1 — Correspondence between this European Standard and EU Directive 2006/42/EC
amended by Directive 2009/127/EC
Essential Requirements of Clause(s)/subclause(s) of Remarks/Notes
Directive 2006/42/EC this EN
All relevant Essential All normative 1) For the purpose of
Requirements clauses/subclauses including compliance with 4 5.2, of this
4.5.2 and 7.1.2. document, 4.5.2 (c) is not
sufficient to achieve
presumption of conformity
for side discharge openings.
2) Compliance with
EN ISO 5395-1 and
EN ISO 5395-2 is required to
achieve presumption of
conformity.
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
INTERNATIONAL ISO
STANDARD 5395-2
Second edition
2013-09-01
AMENDMENT 2
2017-05
Garden equipment — Safety
requirements for combustion-engine-
powered lawnmowers —
Part 2:
Pedestrian-controlled lawnmowers
AMENDMENT 2: Cutting-means-
enclosure guards
Matériel de jardinage — Exigences de sécurité pour les tondeuses à
gazon à moteur à combustion interne —
Partie 2: Tondeuses à gazon à conducteur à pied
AMENDEMENT 2: Enceintes de protection des organes de coupe
Reference number
ISO 5395-
...