oSIST prEN 14903:2006
Surfaces for sports areas - Determination of rotational friction
Surfaces for sports areas - Determination of rotational friction
This European Standard specifies a method for the determination of the friction between any type of indoor sports surface and a rotating foot with a vertical load.
NOTE This method simulates the load exerted by an athlete in a rotating movement on the floor.
Sportböden für Innenbereiche - Bestimmung der Drehreibung
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Reibung zwischen einem beliebigen Sportbodentyp und einem Drehfuß mit vertikaler Last fest. Das Verfahren kann sowohl im Labor als auch vor Ort angewendet werden.
Sols sportifs - Détermination de la glissance en rotation
La présente Norme européenne spécifie une méthode permettant de déterminer la glissance entre un type quelconque de sol sportif et un pied en rotation soumis à une charge verticale. Cette méthode est applicable aux essais effectués en laboratoire et sur site.
Podloge za notranje športne dejavnosti – Ugotavljanje odpornosti proti trenju pri vrtenju
General Information
- Status
- Not Published
- Withdrawal Date
- 28-Feb-2006
- Technical Committee
- SPO - Sports
- Current Stage
- 98 - Abandoned project (Adopted Project)
- Start Date
- 02-Aug-2012
- Due Date
- 07-Aug-2012
- Completion Date
- 02-Aug-2012
Relations
- Effective Date
- 28-Jan-2026
Overview
oSIST prEN 14903:2006 establishes a standardized method for determining the rotational friction of indoor sports surfaces. Developed by SIST and the CEN/TC 217 technical committee, this draft European Standard aims to simulate the frictional force experienced by an athlete's rotating movement on various sports flooring materials. By specifying both laboratory and field testing methods, the standard supports consistent measurement of surface friction performance - a crucial factor in ensuring safety, playability, and suitability of sports venues.
Key Topics
- Rotational Friction Measurement: Defines the procedure for determining the torque and friction coefficient when a loaded test foot rotates on indoor sports surfaces.
- Test Apparatus Specifications: Details the required apparatus, including a gear motor, test foot with neoprene sole, and torque measurement instruments.
- Sampling & Preparation: Provides guidance on sampling test surfaces for laboratory and field conditions, including conditioning of samples and floor preparation.
- Test Procedure: Outlines cleaning requirements, apparatus setup, test execution (rotation at controlled load and speed), and data collection protocols.
- Expression of Results: Standardizes interpretation of torque-time graphs, calculation of average torque and, if required, friction coefficients for comparison.
- Uncertainty & Reporting: Addresses measurement uncertainty tolerances, with a recommended maximum deviation for high reliability, and prescribes essential reporting elements for transparency.
Applications
oSIST prEN 14903:2006 is applicable to all types of indoor sports floor systems, including:
- Sports halls in schools, universities, and recreation centers
- Professional and amateur sports facilities
- Indoor arenas for basketball, volleyball, handball, and multipurpose activities
By applying this standard, facility managers, sports surface manufacturers, and testing laboratories can:
- Verify Safety: Assess whether sports floors provide the necessary grip and rotational friction to reduce slip and injury risks.
- Quality Control: Ensure installed surfaces meet performance requirements and support consistent play conditions.
- Product Development: Guide design and material selection for new sports flooring systems based on friction performance.
- Compliance Documentation: Produce harmonized, detailed test reports to demonstrate conformance with European requirements.
This method is particularly valuable when selecting or certifying surfaces where athlete movement involving sharp turns or pivots occurs, as it ensures flooring delivers optimal interaction with sports footwear.
Related Standards
Organizations using oSIST prEN 14903:2006 may also reference the following related standards:
- EN 14904: Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification
- EN 14877: Synthetic surfaces for outdoor sports areas - Specification
- EN 13036-4: Road and airfield surface characteristics - Test methods for measurement of slip/skid resistance of a surface - The pendulum test
- FIBA, IHF, and other sports federation guidelines: For sports-specific flooring requirements
By adhering to oSIST prEN 14903:2006 and related standards, organizations promote consistent, high-quality indoor sports environments, supporting athlete performance and reducing risk.
Keywords: rotational friction, indoor sports floors, sports surface testing, slip resistance, torque measurement, safety, sports facility standards.
Frequently Asked Questions
oSIST prEN 14903:2006 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Surfaces for sports areas - Determination of rotational friction". This standard covers: This European Standard specifies a method for the determination of the friction between any type of indoor sports surface and a rotating foot with a vertical load. NOTE This method simulates the load exerted by an athlete in a rotating movement on the floor.
This European Standard specifies a method for the determination of the friction between any type of indoor sports surface and a rotating foot with a vertical load. NOTE This method simulates the load exerted by an athlete in a rotating movement on the floor.
oSIST prEN 14903:2006 is classified under the following ICS (International Classification for Standards) categories: 97.220.10 - Sports facilities. The ICS classification helps identify the subject area and facilitates finding related standards.
oSIST prEN 14903:2006 has the following relationships with other standards: It is inter standard links to SIST EN 13757-1:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
oSIST prEN 14903:2006 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
EUROPEAN STANDARD
DRAFT
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2004
ICS
English version
Surfaces for indoor sports areas - Determination of rotational
friction
Sols sportifs intérieurs - Détermination de la glissance en
rotation
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 217.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14903:2004: E
worldwide for CEN national Members.
Contents Page
Foreword. 3
1 Scope . 3
2 Normative references . 3
3 Terms and definitions. 3
4 Principle. 3
5 Sampling. 3
5.1 Laboratory testing . 3
5.2 Field testing. 4
6 Apparatus . 4
6.1 Test unit . 4
6.2 Measuring and recording instruments . 4
7 Preparation of test pieces. 4
7.1 Laboratory testing . 4
7.2 Field testing. 4
8 Procedure . 4
9 Expression of results . 5
10 Uncertainty . 5
11 Test report . 5
Foreword
This document (prEN 14903:2004) has been prepared by Technical Committee CEN/TC 217 "Surfaces for
sports areas", the secretariat of which is held by BSI.
This document is currently submitted to the CEN Enquiry.
1 Scope
This European Standard specifies a method for the determination of the friction between any type of indoor
sports surface and a rotating foot with a vertical load.
NOTE This method simulates the load exerted by an athlete in a rotating movement on the floor.
2 Normative references
Not applicable.
3 Terms and definitions
For the purposes of this European Standard, the following terms and definitions apply.
3.1
friction coefficient
horizontal force between the test foot and the floor (derived from the measured torque) divided by the vertical
load on the foot when the foot rotates (see clause 9)
3.2
vertical load
constant, vertical force exerted on the floor by the test foot
3.3
torque
force transferred to the test foot from the floor when the test foot under vertical load rotates on the floor
4 Principle
Friction is measured by allowing a circular test foot u
...