ISO 10406-1:2015

INTERNATIONAL ISO
STANDARD 10406-1
Second edition
2015-01-15
Fibre-reinforced polymer (FRP)
reinforcement of concrete — Test
methods —
Part 1:
FRP bars and grids
Polymère renforcé par des fibres (PRF) pour l’armature du béton —
Méthodes d’essai —
Partie 1: Barres et grilles en PRF
Reference number
©
ISO 2015
© ISO 2015
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2015 – All rights reserved

Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions, and symbols . 1
3.1 Terms and definitions . 1
3.2 Symbols . 5
4 General provision concerning test pieces . 6
5 Test method for cross-sectional properties . 6
5.1 Test pieces . 6
5.2 Test method . 6
5.3 Calculations . 7
5.4 Test report . 8
6 Test method for tensile properties . 8
6.1 Test pieces . 8
6.2 Test equipment . 9
6.3 Test method . 9
6.4 Calculations . 9
6.5 Test report .11
7 Test method for bond strength by pull-out testing .13
7.1 Test pieces .13
7.2 Testing machine and devices .15
7.3 Test method .16
7.4 Calculations .17
7.5 Test report .17
8 Test method for performance of anchorages and couplers .18
8.1 Test method for performance of anchorages .18
8.2 Test method for performance of couplers .19
8.3 Test report .19
9 Test method for long-term relaxation .20
9.1 Test pieces .20
9.2 Testing frame and devices .21
9.3 Test temperature .21
9.4 Test method .22
9.5 Calculations .22
9.6 Test report .23
10 Test method for tensile fatigue .23
10.1 Test pieces .23
10.2 Testing machine and devices .23
10.3 Test temperature .24
10.4 Test method .24
10.5 Calculations .25
10.6 Test report .25
11 Test method for alkali resistance .25
11.1 Test pieces .25
11.2 Immersion in alkaline solution .26
11.3 External appearance and mass change .26
11.4 Tensile test .27
11.5 Calculations .27
11.6 Test report .28
12 Test method for creep failure .29
12.1 Test pieces .29
12.2 Testing frame and devices .29
12.3 Test temperature .29
12.4 Tensile capacity .29
12.5 Test method .29
12.6 Calculations .30
12.7 Test report .30
13 Test method for transverse shear strength .31
13.1 Test pieces .31
13.2 Testing machine and devices .31
13.3 Test temperature .32
13.4 Test method .33
13.5 Calculations .33
13.6 Test report .33
14 Test method for flexural tensile properties .34
14.1 Test pieces .34
14.2 Testing unit and devices . .34
14.3 Test method .35
14.4 Calculations .
...