iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 21219-16:2023

(Main)

Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 16: Fuel price information and availability (TPEG2-FPI)

Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 16: Fuel price information and availability (TPEG2-FPI)

This document specifies the TPEG fuel price information and availability (FPI) application. The FPI application has been specifically designed to support information from fuel stations, such as their location, fuel types offered and fuel pricing and availability information. The standardized delivery, via TPEG technology, of fuel price information has the following benefits for end users of a TPEG service: a) cost savings to the driver through improved ease of access to price information; b) potentially significant cost savings for fleet operators through improved ease of access to price information; c) environmental benefits from drivers not having to drive around to find the cheapest fuel prices; d) safety improvements for highways authorities, as drivers are less likely to run out of fuel if they are well-informed of local availability and prices; e) as availability of new fuels becomes more common, and more vehicles begin to use them (e.g. biofuels, hydrogen, etc.), drivers will be better informed about availability of fuelling stations. The TPEG FPI application (as an add-on service component next to traffic information, for example) is laid out to support large numbers of fuel stations and fuel prices with only modest bandwidth requirements The application described in this document (TPEG2-FPI) is not appropriate for cases where the objective is to inform electric vehicles of the location of charging stations and the availability of charging points. In such cases, the TPEG application TPEG2-EMI (electro mobility information) is chosen. This is because while TPEG2-FPI (the application described in this document) contains rudimentary support for electric charging stations, a TISA investigation revealed that a simple extension/differentiation of TPEG2-FPI is insufficient for addressing the evolving market needs of the electric vehicle market. Hence, a separate TPEG application has been created to serve the information needs of electric vehicles and their operators: TPEG2-EMI, specified in ISO/TS 21219-25.

Systèmes intelligents de transport — Informations sur le trafic et le tourisme (TTI) via le groupe expert du protocole de transport, génération 2 (TPEG2) — Partie 16: Informations sur le prix des carburants et leur disponibilité (TPEG2-FPI)

General Information

Status
Published
Publication Date
23-May-2023
ICS
03.220.01 - Transport in general
35.240.60 - IT applications in transport
Technical Committee
ISO/TC 204 - Intelligent transport systems
Drafting Committee
ISO/TC 204/WG 10 - Traveller information systems
Current Stage
6060 - International Standard published
Start Date
24-May-2023
Due Date
12-Dec-2022
Completion Date
24-May-2023
Ref Project

Relations

Revises
ISO/TS 21219-16:2016 - Intelligent transport systems — Traffic and travel information via transport protocol exports group, generation 2 (TPEG2) — Part 16: Fuel price information and availability (TPEG2-FPI)
Effective Date
23-Apr-2020
ISO 21219-16:2023 - Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 16: Fuel price information and availability (TPEG2-FPI) Released:24. 05. 2023ISO 21219-16:2023 - Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 16: Fuel price information and availability (TPEG2-FPI) Released:24. 05. 2023
PreviousNext
Standard
ISO 21219-16:2023 - Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 16: Fuel price information and availability (TPEG2-FPI) Released:24. 05. 2023
English language
64 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


INTERNATIONAL ISO
STANDARD 21219-16
First edition
2023-05
Intelligent transport systems —
Traffic and travel information (TTI)
via transport protocol experts group,
generation 2 (TPEG2) —
Part 16:
Fuel price information and availability
(TPEG2-FPI)
Systèmes intelligents de transport — Informations sur le trafic et
le tourisme (TTI) via le groupe expert du protocole de transport,
génération 2 (TPEG2) —
Partie 16: Informations sur le prix des carburants et leur disponibilité
(TPEG2-FPI)
Reference number
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Abbreviated terms . 2
5 Application specific constraints . .2
5.1 Application identification . 2
5.2 Version number signalling . 2
5.3 Ordered components . . 3
5.4 Extension . 3
5.5 TPEG service component frame . 3
6 FPI structure . 4
6.1 General . 4
6.2 FPI structuring concepts . 4
6.2.1 Design . . 4
6.2.2 Factoring out definitions . 4
6.2.3 Transmission of tables of information . 6
6.2.4 MMC usage and FPI message combinations . 7
6.3 FPI Message structure . 8
6.3.1 General . 8
6.3.2 FuelingDefinitions. 10
6.3.3 StationFuelingInformation . 11
6.3.4 Station extra information .12
6.3.5 Station site information . 13
6.3.6 Station location information . 14
7 FPI Message components .16
7.1 FPIMessage . 16
7.2 FPIapplicationContainerTemplate . 17
7.3 FuelingDefinitions . 17
7.4 MessageManagement . 18
7.5 StationExtraInfoCluster . 18
7.6 StationExtraInformation . 19
7.7 StationFuelingInfoCluster . 19
7.8 StationMapLocationCluster . 20
7.9 StationNavLocationAlongRoadCluster . 20
7.10 StationPOILocationCluster . 21
7.11 StationSiteInfo . 21
7.12 StationSiteInfoCluster . 22
7.13 GeographicCoverageLocation .23
7.14 MessageManagementContainerLink . 23
7.15 MMCMasterMessageLink .23
7.16 MMCMessagePartLink .23
7.17 StationEntryLocation . 23
7.18 StationMapLocation . 23
7.19 RoadLocation .23
7.20 StationExitLocation . 23
8 FPI Datatypes.24
8.1 FuelDeliveryRestrictionType . 24
8.2 FuelTypeInformation . 24
8.3 FuelTypePrice . 24
iii
8.4 StationContactInformation . 25
8.5 POILinkType . 25
8.6 SizeRestrictions . 25
8.7 StationBrandAndRating . 26
8.8 StationFuelingInformation .26
8.9 StationMapLocationInfo . 27
8.10 StationLocationVectorInfo . 27
8.11 StationPOILocationInfo .28
8.12 WGS84coordinate .28
9 FPI tables .29
9.1 Introduction of FPI tables . 29
9.2 fpi001:DeliveryUnitType .29
9.3 fpi003:FuelKindType . .29
9.4 fpi004:PaymentMethodType .30
9.5 fpi005:FuelServicePolicyType . 31
9.6 fpi006:AssociatedServiceType . 31
9.7 fpi007:SpatialResolution . 32
9.8 fpi008:FuelBrand . 32
9.9 fpi009:AltFuelBrand .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO/TS 14812:2025(Main)
Intelligent transport systems — Vocabulary

This document defines terms relating to intelligent transport systems (ITS).

  • Technical specification
    87 pages
    English language
    sale 15% off
ISO
ISO/TR 22087:2025(Main)
Intelligent transport systems — Collection of agent behaviour information and sharing between ITS stations

This document describes the common description of the driving behaviour information set (DBIS) data structure and data exchange procedures for sharing among distributed ITS stations by nomadic devices.

  • Technical report
    16 pages
    English language
    sale 15% off
ISO
ISO 25110:2025(Main)
Electronic fee collection — Interface definition for on-board account using an integrated circuit card (ICC)

This document specifies the data transfer models between roadside equipment (RSE) and integrated circuit cards (ICCs) and the interface descriptions between the RSE and on-board equipment (OBE) for on-board accounts using an ICC. It also provides examples of interface definitions and transactions deployed in several countries. This document covers: — data transfer models between the RSE and ICC which correspond to the categorized operational requirements and the data transfer mechanism for each model; — the interface definition between the RSE and OBE based on each data transfer model; — the interface definition for each model; — the functional configuration; — RSE command definitions for ICC access; — the data format and data element definitions of RSE commands; — a transaction example for each model (Annex B).

  • Standard
    29 pages
    English language
    sale 15% off
ISO
ISO 21219-21:2025(Main)
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 21: Geographic location referencing (TPEG-GLR)

This document establishes a method of using geographic location referencing (GLR) that can be used by relevant TPEG applications. The GLR type, defined in this document, is used for defining geographic location references (points, polylines and geographical areas). The GLR method is intended to be one of the methods that can be transported inside a TPEG-Location Referencing Container (TPEG-LRC) for those TPEG applications providing information for primarily geographical locations (e.g. weather). The GLR specification is deliberately kept basic and compact, so that it can also be employed advantageously in non-navigation devices, for simple TPEG services such as weather information, safety alerts, etc. As such, the GLR location referencing method is intended to be complementary to map-related location referencing methods, where the focus is on the referencing of anthropogenic artefacts such as roads and highways. For this reason, the scope of GLR is limited to geographic locations on the Earth’s surface.

  • Standard
    29 pages
    English language
    sale 15% off
ISO
ISO/TS 21219-13:2025(Main)
Intelligent transport systems — Traffic and travel information via transport protocol experts group, generation 2 (TPEG2) — Part 13: Public transport information service (TPEG2-PTS)

This document describes the “public transport information service” (PTS) application, which is intended to cover all modes of public (i.e. collective) transport, both for inter-urban and intra-urban travel. The PTS application is designed to allow the efficient and language-independent delivery of public transport information directly from a service provider to end-users. The PTS application design is based on three main use cases. — Provision of alert information: an alert is a warning that indicates an emergency situation. This case is specifically relevant for broadcast/push mode, for major deviations or disruptions which are relevant for a large number of travellers. A dedicated alert request is also defined and can be used if a backchannel is available. — Timetable information, both scheduled and real time: this information is in some cases relevant for broadcast, e.g. in case of large events for the transport modalities to/from the event site. A dedicated timetable request is also defined and can be used if a backchannel is available. — Individual requests for trip information (backchannel is required). The PTS application focuses on providing core information regarding public transport in order to ensure the compactness of the TPEG application. Specific information as provided in typical public transport apps (e.g. fare information) is not in the scope of this document.

  • Technical specification
    73 pages
    English language
    sale 15% off
ISO
ISO 21219-25:2024(Main)
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 25: Electromobility charging infrastructure (TPEG2-EMI)

This document specifies the "electromobility information" (EMI) TPEG application. The EMI application has been specifically designed to support information about charging infrastructure for electric vehicles (not just cars), the location of e-charging points and their suitability for the respective vehicle (e.g. connector type, charging modality). As electric vehicles will occupy a “charging space” for longer a time than other vehicles, information on availability/waiting time and reservation options are accounted for, as they are highly relevant for enabling a user of an electric vehicle to optimally plan their route/trip. The standardized delivery, via TPEG technology, of electromobility information has the following benefits to an end user of this TPEG service: a) identification of suitable charging units for vehicles, thus preventing unnecessary travel to find a fitting unit (also has environmental benefits); b) verification of the real-time availability of charging units; c) possibility of planning ahead and reserving a spot in a charging park, thus optimizing trip planning; d) possibility of selecting a financially attractive charging point in a charging park where the operator has billing agreements with the user’s electromobility provider. In addition to these end-user benefits, electromobility providers and charging park operators also benefit from a standardized TPEG format as it facilitates harmonization of the electromobility information with the data formats used for the exchange of information between management systems of electromobility providers and charge park operators and related specifications (e.g. Open Charge Alliance,[1] eMobility ICT Interoperability Innovation (eMI3),[2] etc.). The EMI application, as an add-on service component next to traffic information, for example, is laid out to support large numbers of charge parks with only modest bandwidth requirements.

  • Standard
    65 pages
    English language
    sale 15% off
ISO
ISO/TR 6029-1:2024(Main)
Intelligent transport systems — Seamless positioning for multimodal transportation in ITS stations — Part 1: General information and use case definition

This document describes use cases related to seamless positioning systems for multimodal transportation in ITS stations. The use cases define the effectiveness of the seamless positioning concept model based on the P-ITS-S to conclude basic PVT service results using available sensors when mobility is moving indoor and outdoor in a network on/off situation. Use cases are provided for each stage in different environments, e.g. indoor, outdoor, tunnel and out-of-network area when travelling starts or ends. Within the use cases, the nomadic device implements a personal ITS station (P-ITS-S) to achieve compatibility with other ITS stations as referenced in this document. The main purpose of this document is to describe the overall concept model, which specifies: — the concept model and actors for each domain; — the relationship of actors under the material domain; — the message sequence diagrams for each domain; and — the data transmission list for each actor to provide a seamless indoor and outdoor positioning system through sensor data fusion. In addition, this document provides: — basic principles used in its drafting; and — a gap analysis, consisting of a formal study of: — the status of seamless positioning technology and implementations, — how seamless positioning technology intends to evolve, and — how to close the gap between current and future technology and implementations. — This document compares desired and actual outcomes and pinpoints opportunities for improvement.

  • Technical report
    40 pages
    English language
    sale 15% off
ISO
ISO 22086-2:2024(Main)
Intelligent transport systems (ITS) — Network-based precise positioning infrastructure for land transportation — Part 2: Functional requirements and data sets for nomadic devices

This document specifies the functional requirements of nomadic devices for lane-level positioning and integrity monitoring with the network-based precise positioning infrastructure for land transportation (NETPPI-LT), a lane-level positioning system based on global navigation satellite systems (GNSS) described in ISO/TR 22086-1. This document identifies the GNNS threats to monitor and the errors to remove or mitigate to achieve lane-level accuracy and integrity. It also specifies the data sets to be contained in messages between the nomadic device and the control station providing GNSS correction and integrity information. This specification enables the nomadic device to support lane-level positioning and integrity monitoring. Enabling techniques and methods, which can be different for each provider or vendor, are not addressed in this document.

  • Standard
    14 pages
    English language
    sale 15% off
ISO
ISO/TR 17748-1:2024(Main)
Intelligent transportation systems — Energy-based green ITS services for smart city mobility applications via nomadic and mobile devices — Part 1: General information and use case definitions

This document provides a framework and information on the total amount of energy appropriate for the deployment of smart city mobility and energy efficiency technologies. These technologies can increase operational energy efficiency and unlock enhanced transportation waste-free energy applications, as well as measuring energy consumption. The standard framework for energy-based green intelligent transport systems (G-ITS) builds on the best practices for energy efficient transport and management systems, as well as applications of intelligent transport systems (ITS), and aims to accommodate the specific needs of energy-based green ITS in smart cities. G-ITS use data platforms to measure energy for transport and to forecast demand. A smart city provides G-ITS services to improve energy efficiency by using nomadic devices and by monitoring energy supply and demand. This document describes the change in the traffic paradigm from the perspective of energy efficiency. It outlines: — general information for energy-based G-ITS as a service using nomadic and mobile devices; — use cases for energy-based G-ITS services using nomadic and mobile devices; — use cases for energy-based mobility services, for example electric vehicles (EV), transportation infrastructure and other mobility services using nomadic devices.

  • Technical report
    12 pages
    English language
    sale 15% off
ISO
ISO 17438-2:2024(Main)
Intelligent transport systems — Indoor navigation for personal and vehicle ITS stations — Part 2: Requirements and specification for indoor maps

This document defines requirements and specifications of indoor positioning references, which can be referenced for positioning in indoor space, for supporting indoor navigation functionality of a personal/vehicle (P/V) ITS station. NOTE Specific structure and contents of indoor positioning references depend on types of indoor positioning technologies. This document defines: a) the composition of an indoor map for indoor navigation of P/V ITS stations; b) the schema and encoding format of the indoor map for indoor navigation at the P/V ITS stations. This document focuses on the specification and format of the indoor map. The following issues which are adjunctive but essential for commercial navigation services are beyond the scope of this document: — authorized and authenticated access of users and services, including security; — payment; — preparation of indoor data which are necessary for indoor navigation; — low-level communication protocols required to transfer and share data from and to a roadside ITS station or a central ITS station; — other issues dependent on implementation of an instance of indoor navigation.

  • Standard
    29 pages
    English language
    sale 15% off