ISO 18185-3:2015

INTERNATIONAL ISO
STANDARD 18185-3
Second edition
2015-12-01
Freight containers — Electronic
seals —
Part 3:
Environmental characteristics
Récipients de fret — Joints électroniques —
Partie 3: Caractéristiques environnementales
Reference number
©
ISO 2015
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Environmental characteristics . 2
4.1 General . 2
4.2 Low temperature. 2
4.2.1 Test purpose . 2
4.2.2 Test requirement . 2
4.2.3 Test method for storage temperature testing . 2
4.2.4 Test method for operating temperature testing . 3
4.3 High temperature. 3
4.3.1 Test purpose . 3
4.3.2 Test requirement . 3
4.3.3 Test method for storage temperature testing . 3
4.3.4 Test method for operating temperature testing . 3
4.4 Mechanical shock . 4
4.4.1 Test purpose . 4
4.4.2 Test requirement . 4
4.4.3 Test method . 4
4.5 Vibration . 5
4.5.1 Test purpose . 5
4.5.2 Test requirement . 5
4.5.3 Test method . 5
4.6 Humidity . 6
4.6.1 Test purpose . 6
4.6.2 Test requirement . 6
4.6.3 Test method . 6
4.7 Rain and snow . 7
4.7.1 Test purpose . 7
4.7.2 Test requirement . 7
4.7.3 Test method . 7
4.8 Salt fog . 8
4.8.1 Test purpose . 8
4.8.2 Test requirement . 8
4.8.3 Test method . 8
4.9 Drop shock . 8
4.9.1 Test purpose . 8
4.9.2 Test requirement . 8
4.9.3 Test method . 9
4.10 Sand and dust . 9
4.10.1 Test purpose . 9
4.10.2 Test requirement . 9
4.10.3 Test method . 9
4.11 Electromagnetic environment . 9
4.11.1 Test purpose . 9
4.11.2 Test requirement .10
4.11.3 Test method .10
4.12 Solar radiation .10
4.12.1 Test purpose .10
4.12.2 Test requirement .10
4.12.3 Test method .10
4.13 Ice and frost .11
4.13.1 Test purpose .11
4.13.2 Test requirement .11
4.13.3 Test method .11
4.14 Water-high pressure .11
4.14.1 Test purpose .11
4.14.2 Test requirement .11
4.14.3 Test method .11
4.15 Lightning strike .12
4.15.1 Test purpose .12
4.15.2 Test requirement .12
4.15.3 Test method .12
4.16 Thermal shock .12
4.16.1 Test purpose .12
4.16.2 Test requirement .12
4.16.3 Test method .12
Bibliography .14
iv © ISO 2015 – All rights reserved

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing Internat
...