ISO/IEC FDIS 29174-2

FINAL
INTERNATIONAL ISO/IEC
DRAFT
STANDARD FDIS
29174-2
ISO/IEC JTC 1
Information technology — UII scheme
Secretariat: ANSI
and encoding format for Mobile AIDC
Voting begins on:
services —
2012-05-14
Voting terminates on:
Part 2:
2012-07-14
Registration procedures
Technologies de l’information — Schéma UII et format d’encodage pour
services AIDC mobiles —
Partie 2: Modes opératoires d’enregistrement
Please see the administrative notes on page iii
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR­
TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/IEC FDIS 29174­2:2012(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO/IEC 2012

Copyright notice
This ISO document is a Draft International Standard and is copyright­protected by ISO. Except as permitted
under the applicable laws of the user’s country, neither this ISO draft nor any extract from it may be reproduced,
stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying, recording
or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E­mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO/IEC 2012 – All rights reserved

In accordance with the provisions of Council Resolution 15/1993, this document is circulated in the English
language only.
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)
form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards through technical committees established by the
respective organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental,
in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have
established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 29174­2 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 31, Automatic identification and data capture techniques.
Along with ISO/IEC 29174-1, this first edition cancels and replaces the first edition of ISO/IEC 29174.
ISO/IEC 29174 consists of the following parts, under the general title Information technology — UII scheme and
encoding format for Mobile AIDC services:
— Part 1: Identifier scheme for multimedia information access triggered by tag-based identification
— Part 2: Registration procedures
iv © ISO/IEC 2012 – All rights reserved

Introduction
This part of ISO/IEC 29174 defines the Identifier (ID) scheme for multimedia information access triggered by
tag-based identification, which provides the users with an improved method to access to the multimedia content
without typing its address on a keyboard or inputting the name of objects and/or places of relevant information.
This is one of the major communication services using identifiers in data carriers such as radio frequency
identification (RFID) tags, smart cards and bar codes. International standardization of these services will
enable a previously unrealized compatibility for international multimedia information services using identifiers.
The purpose of this part of ISO/IEC 29174 is to specify registration procedures of ID scheme, obligations and
requirements of Registration Authority (RA) as managing the ID.
There are alternatives techniques to meet the use case addressed by this part of ISO/IEC 29174. One of those
techniques is the use of EPC and ONS. Those interested in this technique are encouraged to contact GS1 for
further information.
© ISO/IEC 2012 – All rights reserved v

FINAL DRAFT INTERNATIONAL STANDARD ISO/IEC FDIS 29174-2:2012(E)
Information technology — UII scheme and encoding format for
Mobile AIDC services —
Part 2:
Registration procedures
1 Scope
This part of ISO/IEC 29174 defines the registration procedures of the ID scheme defined by ISO/IEC 29174-
1. The ID scheme consists of Company Code, length and elements. The Company Code is allocated by
Registration Authority (RA).
Therefore, this part of ISO/IEC 29174 specifies as follows
— registration procedures of Company Code, and
— mechanisms for the appointment of the RA.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO/IEC 29174­1, Information technology — UII scheme and encoding format for Mobile AIDC services — Part 1:
Identifier scheme for multimedia information access triggered by tag-based identification
3 Terms, definitions and acronyms
For the purposes of this document, the terms and definitions given in ISO/IEC 29174-1 and the follo
...