Amendment 1 - Limits and methods of measurement of radio interference characteristics of industrial, scientific and medical (ISM) radio-frequency equipment (excluding surgical diathermy apparatus)

Amendement 1 - Limites et méthodes de mesure des caractéristiques des appareils industriels, scientifiques et médicaux (ISM) à haute fréquence (à l'exclusion des appareils de diathermie chirurgicale) relatives aux perturbations radioélectriques

General Information

Status

Published

Publication Date

30-Nov-1976

ICS

33.100.10 - Emission

Technical Committee

CISPR - International special committee on radio interference

Current Stage

DELPUB - Deleted Publication

Start Date

19-Nov-2016

Completion Date

26-Oct-2025

Ref Project

Relations

Amends

CISPR 11:1975 - Limits and methods of measurement of radio interference characteristics of industrial, scientific and medical (ISM) radio-frequency equipment (excluding surgical diathermy apparatus)

Effective Date

05-Sep-2023

Revised

CISPR 11:1990 - Limits and methods of measurement of electromagnetic disturbance characteristics of industrial, scientific and medical (ISM) radio-frequency equipment

Effective Date

05-Sep-2023

CISPR 11:1975/AMD1:1976 - Amendment 1 - Limits and methods of measurement of radio interference characteristics of industrial, scientific and medical (ISM) radio-frequency equipment (excluding surgical diathermy apparatus)
Released:12/1/1976

Standard

CISPR 11:1975/AMD1:1976 - Amendment 1 - Limits and methods of measurement of radio interference characteristics of industrial, scientific and medical (ISM) radio-frequency equipment (excluding surgical diathermy apparatus) Released:12/1/1976

English and French language

3 pages

sale 15% off

Preview

sale 15% off

Preview

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

IEC

IEC 61000-6-4:1997(Main)

Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 4: Emission standard for industrial environments

This standard for emission requirements applies to electrical and electronic apparatus intended for use in the industrial locations (both indoor and outdoor, or in proximity to industrial power installations) for which no dedicated product or product-family emission standard exists. Disturbances in the frequency range 0 Hz to 400 GHz are covered.

Standard
17 pages
English and French language
sale 15% off

29-Jan-1997
33.100.10
CISPR

IEC

CISPR 12:1978/AMD1:1986(Amendment)

Amendment 1 - Limits and methods of measurement of radio interference characteristics of vehicles, motor boats, and spark-ignited engine-driven devices

Standard
10 pages
English and French language
sale 15% off

31-Jan-1986
27.020
33.100.10
CISPR

IEC

CISPR 12:1978(Main)

Limits and methods of measurement of radio interference characteristics of vehicles, motor boats, and spark-ignited engine-driven devices

Standard
40 pages
English and French language
sale 15% off

31-Dec-1977
27.020
33.100.10
CISPR

IEC

CISPR 11A:1976(Main)

First supplement - Limits and methods of measurement of radio interference characteristics of industrial, scientific and medical (ISM) radio-frequency equipment (excluding surgical diathermy apparatus)

Standard
7 pages
English and French language
sale 15% off

31-Dec-1975
33.100.10
CISPR

IEC

CISPR 12:1975(Main)

Limits and methods of measurement of radio interference characteristics of ignition systems of motor vehicles and other devices

Standard
38 pages
English and French language
sale 15% off

31-Dec-1974
27.020
33.100.10
CISPR

IEC

CISPR 11:1975(Main)

Limits and methods of measurement of radio interference characteristics of industrial, scientific and medical (ISM) radio-frequency equipment (excluding surgical diathermy apparatus)

Standard
33 pages
English and French language
sale 15% off

31-Dec-1974
33.100.10
CISPR

IEC

IEC 62153-4-7:2021(Main)

Metallic cables and other passive components test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance Z_T and screening attenuation a_S or coupling attenuation a_C of connectors and assemblies - Triaxial tube in tube method

IEC 62153-4-7:2021 deals with the triaxial tube in tube method. This triaxial method is suitable to determine the surface transfer impedance and/or screening attenuation and coupling attenuation of mated screened connectors (including the connection between cable and connector) and cable assemblies. This method could also be extended to determine the transfer impedance, coupling or screening attenuation of balanced or multipin connectors and multicore cable assemblies. This third edition cancels and replaces the second edition published in 2015 and its Amendment 1:2018.This edition includes the following significant technical changes with respect to the previous edition:
- Annex E contains informative information about the direct measurement of screening effectiveness of connectors;
- Annex F gives normative information about mixed mode parameters;
- Annex G contains normative information about accessories for measuring coupling attenuation;
- Annex H discusses the low frequency screening attenuation.

Standard
174 pages
English language
sale 15% off
Standard
136 pages
English language
sale 15% off
Standard
114 pages
English and French language
sale 15% off

IEC

IEC 62153-4-7:2021/AMD1:2025(Amendment)

Amendment 1 - Metallic cables and other passive components test methods - Part 4-7: Electromagnetic compatibility (EMC) -Test method for measuring of transfer impedance Z_T and screening attenuation a_S or coupling attenuation a_C of connectors and assemblies - Triaxial tube in tube method

Standard
15 pages
English language
sale 15% off
Standard
15 pages
French language
sale 15% off
Standard
30 pages
English and French language
sale 15% off

IEC

CISPR TR 16-4-4:2025(Main)

Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: The CISPR model for the calculation of limits for the protection of radio services

CISPR TR 16-4-4:2025 which is a Technical Report, establishes the CISPR model for the calculation of limits for the protection of radio services, based on data from the IEC Radio Services Database (RSD) and estimations of the input values for related probabilistic factors. This is part of the process of the derivation of disturbance limits in the radio frequency spectrum for use in publications containing emission requirements Application of this document leads to a frequency dependent limit result for a particular disturbance phenomenon and the considered product or product type establishing the technical basis in the CISPR limit specification procedure.
NOTE Non-technical parameters and terms that can be considered to influence a limit for inclusion in IEC publications are excluded from the modelling (see also Clause 4.6.5.3).
This third edition cancels and replaces the second edition published in 2007, Amendment 1:2017 and Amendment 2:2020. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) full revision of the limit calculation model;
b) the content on statistics of complaints was taken from this publication and published as separate document (CISPR TR 16-4-6);
c) application cases/rationales were separated from the model and will be handled in another document to be drafted.

Technical report
57 pages
English language
sale 15% off

IEC

CISPR 16-1-4:2025(Main)

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements

CISPR 16-1-4:2025 specifies the characteristics and performance of equipment for the measurement of radiated disturbances in the frequency range 9 kHz to 18 GHz. Specifications for antennas and test sites are included.
NOTE In accordance with IEC Guide 107. CISPR 16-1-4 is a basic EMC publication for use by product committees of the IEC. As stated in Guide 107, product committees are responsible for determining the applicability of the EMC standard. CISPR and its sub-committees are prepared to cooperate with product committees in the evaluation of the value of particular EMC tests for specific products.
The requirements of this publication apply at all frequencies and for all levels of radiated disturbances within the CISPR indicating range of the measuring equipment. Methods of measurement are covered in CISPR 16-2-3, further information on radio disturbance is given in CISPR TR 16-3, and uncertainties, statistics, and limit modelling are covered in CISPR 16-4 series. This fifth edition cancels and replaces the fourth edition published in 2019, Amendment 1:2020 and Amendment 2:2023. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) revision of the definition 3.1.7 and of the general introduction 8.1.1 for CMAD;
b) introduction of a new cable termination device, the very high frequency line impedance stabilization network (VHF-LISN) in 8.2;
c) addition of definition 3.1.34 for VHF-LISN, 3.1.20 for reference ground, 3.1.21 for reference ground plane and 3.1.31 for TN‑C‑S power system;
d) various non-technical editorial, style, and wording adjustments for consistency with drafting rules.

Standard
515 pages
English language
sale 15% off