iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 61869-4:2013/COR1:2014

(Corrigendum)

Corrigendum 1 - Instrument transformers - Part 4: Additional requirements for combined transformers

Corrigendum 1 - Instrument transformers - Part 4: Additional requirements for combined transformers

Corrigendum 1 - Transformateurs de mesure - Partie 4: Exigences supplémentaires concernant les transformateurs combinés

General Information

Status
Published
Publication Date
26-Aug-2014
ICS
17.220.20 - Measurement of electrical and magnetic quantities
Technical Committee
TC 38 - Instrument Transformers
Current Stage
PPUB - Publication issued
Start Date
30-Sep-2014
Completion Date
27-Aug-2014
Ref Project

Relations

Corrects
IEC 61869-4:2013 - Instrument transformers - Part 4: Additional requirements for combined transformers
Effective Date
05-Sep-2023
IEC 61869-4:2013/COR1:2014 - Corrigendum 1 - Instrument transformers - Part 4: Additional requirements for combined transformers Released:8/27/2014IEC 61869-4:2013/COR1:2014 - Corrigendum 1 - Instrument transformers - Part 4: Additional requirements for combined transformers Released:8/27/2014
PreviousNext
Standard
IEC 61869-4:2013/COR1:2014 - Corrigendum 1 - Instrument transformers - Part 4: Additional requirements for combined transformers Released:8/27/2014
English and French language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 61869-4 IEC 61869-4
(First edition – 2013) (Première édition – 2013)

Instrument transformers – Transformateurs de mesure –

Part 4: Additional requirements for combined Partie 4: Exigences supplémentaires concernant
transformers les transformateurs combinés

CO RRI G E NDUM 1
8 Rules for transport, storage, 8 Rules for transport, storage,
erection, operation and maintenance erection, operation and maintenance
This correction applies to the French text Remplacer le titre existant par celui qui
only. suit:
8 Règles
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC/IEEE 63253-5713-8:2024(Main)
Station Service Voltage Transformers (SSVT)

IEC/IEEE 63253-5713-8:2024 describes electrical and mechanical requirements of single-phase station service voltage transformers with system voltages of 46 kV or higher and with the maximum rated voltage of the power winding of 1 000 V.
This document is a basis for the establishment of performance and limited electrical and mechanical interchangeability requirements of the equipment are described. It is also a basis for assistance in the proper selection of such equipment.
A station service voltage transformer (SSVT) is a single-phase transformer to be connected line-to-earth on an effectively earthed system. It can be used either as an individual unit for supplying single-phase loads, or in a three-phase bank to support three-phase loads. A typical application is to supply substation power such as lighting, pump and motor loads. The SSVT can be provided with a measuring winding when requested by the user.

  • Standard
    84 pages
    English language
    sale 15% off
IEC
IEC TR 61869-100:2017/COR1:2023(Corrigendum)
Corrigendum 1 - Instrument transformers - Part 100: Guidance for application of current transformers in power system protection
  • Technical report
    2 pages
    English language
    sale 15% off
IEC
IEC 61869-1:2023(Main)
Instrument transformers - Part 1: General requirements

IEC 61869-1:2023 is applicable to newly manufactured instrument transformers intended for applications where the nominal voltage is higher than 1 kV AC or 1,5 kV DC, with an analogue or a digital secondary signal for measuring, protection and control purposes, with rated frequencies from 15 Hz to 400 Hz, or for DC applications.
The general requirements for instrument transformers for applications in LV systems (nominal voltage = 1 kV AC or = 1,5 kV DC) are covered by IEC 61869-201.
This part of IEC 61869 is a product family standard and covers general requirements only. For each type of instrument transformer, the product standard is composed of this document and the relevant specific product standard.
This part of IEC 61869 contains the requirements for the limits of the errors both for analogue and digital secondary signal. The other characteristics of a digital interface for instrument transformer are standardised in IEC 61869-9 as an application of the IEC 61850 horizontal standard series, covering communication networks and systems for power utility automation.
This part of IEC 61869 considers bandwidth requirements. The accuracy requirements on harmonics and requirements for the anti-aliasing filter are specified in 5.7.
IEC 61869-1:2023 cancels and replaces the first edition published in 2007 and IEC 61869-6:2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) merger with IEC 61869-6:2016;
b) new scope: equipment for HV applications with a nominal voltage ; 1 kV AC or 1,5 kV DC;
c) new classification of some special tests as type tests or routine test;
d) additional type tests, additional special tests and new clause for commissioning tests;
e) new annexes E, F, G and I.

  • Standard
    285 pages
    English and French language
    sale 15% off
IEC
IEC 61869-99:2022/COR1:2023(Corrigendum)
Corrigendum 1 - Instrument transformers - Part 99: Glossary
  • Standard
    10 pages
    English and French language
    sale 15% off
IEC
IEC 61869-99:2022(Main)
Instrument transformers - Part 99: Glossary

IEC 61869-99:2022 contains the glossary of specific terminology and definitions used in the field of instrument transformers within the various parts of the series. Unless it is otherwise specified, in this document all periodic electrical quantities are understood to be RMS values.
The contents of the corrigendum of January 2023 have been included in this copy.

  • Standard
    109 pages
    English and French language
    sale 15% off
IEC
IEC 61869-2:2012/ISH1:2022(Main)
Interpretation Sheet 1 - Instrument transformers - Part 2: Additional requirements for current transformers
  • Standard
    3 pages
    English language
    sale 15% off
IEC
IEC 61869-11:2017/ISH1:2021(Main)
Interpretation sheet 1 - Instrument transformers - Part 11: Additional requirements for low-power passive voltage transformers
  • Standard
    9 pages
    English language
    sale 15% off
IEC
IEC 61869-13:2021(Main)
Instrument transformers - Part 13: Stand-alone merging unit (SAMU)

IEC 61869-13:2021 is a product standard and covers only additional requirements for stand-alone merging units (SAMUs) used for AC applications having rated frequencies from 15 Hz to 100 Hz. The digital output format specification is not covered by this document; it is standardized in IEC 61869-9 as an application of IEC 61850, which specifies the power utility communication architecture.
This document covers SAMUs having standardized analogue inputs (for example: 1 A, 5 A, 3,25 V / √3 or 100 V / √3) provided by instrument transformers compliant with relevant product standards (e.g. IEC 61869-2 to IEC 61869-5, IEC 61869-7, IEC 61869-8, IEC 61869-10, IEC 61869-11, IEC 60044-1 to IEC 60044-6, IEC 60185, IEC 60186, IEEE C57.13), and aims to convert them to the digital output compliant with IEC 61869-9. Other input and output types are outside the scope of this document. Appropriate SAMU functionality can be combined with switchgear controller functionality defined in IEC 62271-3 or other IED functionality defined in IEC 60255 (all parts).
Cyber security requirements are outside the scope of this document and are covered by the IEC 62351 series.
IEC 61869-13:2021 is to be used in conjunction with IEC 61869-9:2016, Digital interface for instrument transformers, and IEC 61869­6:2016, Additional general requirements for low-power instrument transformers, which, in turn, are based on IEC 61869-1:2007, General requirements.

  • Standard
    141 pages
    English and French language
    sale 15% off
IEC
IEC 61869-15:2018(Main)
Instrument transformers - Part 15: Additional requirements for voltage transformers for DC applications

IEC 61869-15:2018 provides all requirements specific to voltage transformers to be used in DC applications (DCVTs), whatever the technology used. The output signal can be analogue or digital.
It is applicable to newly manufactured voltage transformers used for measuring, protection and/or control applications in DC power systems with a rated voltage above 1,5 kV.
This document covers passive voltage dividers as well as active voltage transformers, used for measurement, control and protection.
The general configuration of a single-pole low-power instrument transformer is described in Figure 601 of IEC 61869-6:2016.
IEC 61869-15:2018 applies to voltage transformers (VT) intended to be used in DC applications with the following functions:
• measure DC voltage (with significant harmonics);
• withstand DC voltage.
Two main technologies of DC converters exist today: LCC and VSC
• Line-commutated converters (LCC) are based on thyristor converters. They are characterized by a single direction of current flow, and a voltage polarity reversal possibility. Significant voltage and current harmonics exist up to frequencies of about 3 kHz to 4 kHz.
• Voltage source converters (VSC) are based on transistor converters. They are characterized by a bi-directional current flow and a single voltage polarity. Voltage and current harmonics exist up to frequencies of about 20 kHz.

  • Standard
    71 pages
    English and French language
    sale 15% off
IEC
IEC 61869-14:2018(Main)
Instrument transformers - Part 14: Additional requirements for current transformers for DC applications
SIST IEC 60364-7-713:2000

IEC 61869-14:2018 provides all requirements specific to current transformers to be used in DC applications (DCCTs), whatever the technology used. The output signal can be analogue or digital.
It is applicable to newly manufactured current transformers used for measuring, protection and/or control applications in DC power systems with a rated voltage above 1,5 kV.
The general configuration of a single-pole low-power instrument transformer is described in Figure 601 of IEC 61869-6:2016.
The DCCTs intended for current measurement in the transistor branch of the VSC valve (referred to as CT4a and CT4b in Figure 1403 and Table 1402) are not covered by this document, and will be considered in a future revision.
IEC 61869-14:2018 applies to current transformers intended to be used in DC applications with at least one of the following functions:
• measure DC current (with significant harmonics);
• withstand DC voltage.
Depending on the position on the DC system, different kinds of application exist, which are briefly described below, together with the approximate voltage or current wave shape.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    85 pages
    English and French language
    sale 15% off