IEC 60068-2-11:1981/COR1:1999
(Corrigendum)Corrigendum 1 - Environmental testing - Part 2: Tests. Test Ka: Salt mist
Corrigendum 1 - Environmental testing - Part 2: Tests. Test Ka: Salt mist
Corrigendum 1 - Essais d'environnement - Deuxième partie: Essais. Essai Ka: Brouillard salin
General Information
Relations
Standards Content (Sample)
Publication 60068-2-11 de la CEI IEC Publication 60068-2-11
(Troisième édition – 1981) (Third edition – 1981)
Essais fondamentaux climatiques Basic environmental
et de robustesse mécanique – testing procedures –
Deuxième partie: Essais – Part 2: Tests –
Essai Ka: Brouillard salin Te
...
This May Also Interest You
IEC 60721-2-2:2024 presents fundamental properties, quantities for characterization, and a classification of environmental conditions dependent on precipitation and wind relevant to electrotechnical products.
This third edition cancels and replaces the second edition published in 2012. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the layout of the information provided has been re-organized;
b) the information provided has been extensively enhanced and revised;
c) new information on wind severities has been included.
- Standard113 pagesEnglish and French languagesale 15% off
IEC 60068-2-87:2024 describes exposures of materials and components to UV-C radiation during ultraviolet germicidal irradiation (UVGI) treatments or other processes that require UV‑C exposure and test procedures to simulate those environments. Severities representing various frequencies and intensities of UV-C exposures are described. Test conditions are described and limited to devices that utilize low pressure mercury lamps which emit most of their radiation at a single spectral line at 254 nm.
- Standard29 pagesEnglish and French languagesale 15% off
IEC 60721-3-1:2018 classifies the groups of environmental parameters and their severities to which products together with their packaging, if any, are subjected when stored. The environmental conditions specified in this document are limited to those which can directly affect the products or their ultimate performance. Only environmental conditions as such are considered. No special description of the effects of these conditions on the products is given. Environmental conditions directly related to fire or explosions are not included. Conditions of stationary use, portable and non-stationary use, use in vehicles and ships, and conditions of transportation are given in other subparts of the IEC 60721-3 series. This third edition cancels and replaces the second edition, published in 1997, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a. Clause 3: reworded and simplified.
b. Clause 4: reworded and simplified.
c. Clause 5: Annex C has been incorporated in Clause 5.
d. 5.2: all existing climate classes have been replaced by completely new classes. The new classes are divided into 3 groups. The reason for the new classes is the latest revision of IEC 60721-2-1 which incorporated new climate types.
e. 5.3: new classes for solar radiation and snow load.
f. 5.6: all existing classes for mechanically active substances have been replaced by completely new classes.
g. 5.7: all existing classes for mechanical conditions have been replaced by completely new classes.
h. Table 1: new climatic classes with new severities.
i. Table 2: new classes for solar radiation and snow load.
j. Table 5 new mechanically active substances classes.
k. Table 6: new mechanical conditions classes.
- Standard2 pagesEnglish and French languagesale 15% off
- Standard2 pagesEnglish and French languagesale 15% off
IEC 60721-3-9:2024 classifies groups of microclimatic conditions, to which components (basic parts, assemblies, built-in units) can be subjected inside products, which are used under the climatic conditions as classified in IEC 60721-3-3 and IEC 60721-3-4.
This second edition cancels and replaces the first edition published in 1993, Amendment 1:1994 and Corrigendum 1:1995. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Clause 2 has been updated;
b) Clause 4 has been re-edited and simplified;
c) Annex A has been revised and updated;
d) a new Annex B has been added and gives the origin of the constitutional diagram for humid air, which is the basis of drawing the climatogram for a microclimate.
- Standard34 pagesEnglish and French languagesale 15% off
IEC 60068-2-86:2024 provides a test procedure for use with multi-exciter and multi-axis vibration test systems. The vibration test is intended for general application to components, equipment, and other products, hereinafter referred to as "specimens", subjected to dynamic environments that could arise during an equipment life cycle. Although this document is mainly intended for vibration testing, the procedure is also applied to certain types of shock and transient tests.
- Standard79 pagesEnglish and French languagesale 15% off
IEC 60721-2-6:2022 deals with environmental conditions appearing in nature related to earthquake vibrations and shocks.
Its object is to define some fundamental properties and quantities for characterization of earthquakes as background material for the severities to which products are liable to be exposed during storage and use. The accelerations given are for ground surface conditions only. Conditions related to structures are referred to but restricted to general case descriptions.
This second edition cancels and replaces the first edition published in 1990. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
the main aim of this revision is to classify in a limited number of classes the seismic activity level of the zone where the equipment could be installed;
the correlation between intensity scales, magnitude scales and peak ground acceleration is deleted due to the scientific uncertainty to define such a correlation in a rigorous way;
updated scales are given both for intensity and for magnitude;
the earthquake zone map, which was not usable in practice, is replaced by an annex giving information about how to retrieve consistent peak ground acceleration distribution all over the world;
with regard to identification of the peak ground seismic acceleration of the zone, where the equipment could be installed, the user is made aware that national standards and laws can apply.
- Standard5 pagesEnglish and French languagesale 15% off
IEC 60068-2-14:2023 provides tests with specified ambient temperature changes to analyse their impacts on specimens. This seventh edition cancels and replaces the sixth edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) updating of the figures for clarification purposes;
b) updating of specimen temperature(s) and severities as well as tolerances for change of temperature tests;
c) revision of standardized requirements for test reports for Tests Na and Nb.
- Standard111 pagesEnglish languagesale 15% off
- Standard70 pagesEnglish and French languagesale 15% off
IEC TS 60721-4-3:2023 This part of IEC 60721 deals with the correlation and transformation of the conditions given in IEC 60721-3-3 to the environmental test procedures defined in IEC 60068-2.
This document provides test procedures and test severities for electrotechnical equipment operated at stationary weatherprotected locations for the product classes set out in IEC 60721-3-3.
This first edition cancels and replaces IEC TR 60721-4-3:2001 and IEC TR 60721-4-3:2001/AMD1:2003. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to IEC TR 60721-4-3:2001 and IEC TR 60721-4-3:2001/AMD1:2003:
a) the document has been totally reworked;
b) all figures have been removed, except in Annex A;
c) severities have been aligned with those of IEC 60721-3-3:2019.
- Technical specification19 pagesEnglish languagesale 15% off
- Standard4 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.