IEC 61000-6-3:2006+AMD1:2010 CSV
(Main)Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
IEC 61000-6-3:2006+A1:2010 This part of IEC 61000 for EMC emission requirements applies to electrical and electronic apparatus intended for use in residential, commercial and light-industrial environments. Emission requirements in the frequency range 0 Hz to 400 GHz are covered. No measurement needs to be performed at frequencies where no requirement is specified. This generic EMC emission standard is applicable if no relevant dedicated product or product-family EMC emission standard exists. This standard applies to apparatus intended to be directly connected to a low-voltage public mains network or connected to a dedicated DC source, which is intended to interface between the apparatus and the low-voltage public mains network. This standard applies also to apparatus which is battery operated or is powered by a non-public, but non-industrial, low-voltage power distribution system if this apparatus is intended to be used in the locations described below. The environments encompassed by this standard are residential, commercial and light-industrial locations, both indoor and outdoor. The following list, although not comprehensive, gives an indication of locations that are included:
- residential properties, for example houses, apartments;
- retail outlets, for example shops, supermarkets;
- business premises, for example offices, banks;
- areas of public entertainment, for example cinemas, public bars, dance halls;
- outdoor locations, for example petrol stations, car parks, amusement and sports centres;
- light-industrial locations, for example workshops, laboratories, service centres.
Locations that are characterised by being supplied directly at low voltage from the public mains network are considered to be residential, commercial or light-industrial. The object of this standard is to define the emission test requirements for apparatus defined in the scope in relation to continuous and transient, conducted and radiated disturbances. The emission requirements have been selected so as to ensure that disturbances generated by apparatus operating normally in residential, commercial and light-industrial locations do not exceed a level which could prevent other apparatus from operating as intended. Fault conditions of apparatus are not taken into account. Not all disturbance phenomena have been included for testing purposes in this standard but only those considered as relevant for the equipment covered by this standard. These requirements represent essential electromagnetic compatibility emission requirements. Requirements are specified for each port considered. This consolidated version consists of the second edition (2006) and its amendment 1 (2010). Therefore, no need to order amendment in addition to this publication.
Compatibilité électromagnétique (CEM) - Partie 6-3: Normes génériques - Norme sur l'émission pour les environnements résidentiels, commerciaux et de l'industrie légère
La CEI 61000-6-3:2006+A1:2010 La présente partie de la CEI 61000 concernant les exigences d'émissions en matière de compatibilité électromagnétique s'applique aux appareils électriques et électroniques destinés à être utilisés dans des environnements résidentiels, commerciaux et de l'industrie légère. Les exigences d'émissions dans la gamme de fréquences de 0 kHz à 400 GHz sont couvertes. Il n'est pas nécessaire de réaliser des mesures aux fréquences pour lesquelles aucune exigence n'a été spécifiée. Cette norme d'émission CEM générique s'applique en l'absence de norme applicable d'émission CEM spécifique à un produit ou à une famille de produits. Cette norme s'applique aux appareils destinés à être raccordés directement au réseau public d'alimentation basse tension ou à une source de courant continu spécifique destinée à servir d'interface entre l'appareil et le réseau public d'alimentation basse tension. Cette norme s'applique également aux appareils alimentés par piles ou batteries ou par un système de distribution basse tension non public mais non industriel, lorsque cet appareil est destiné à être utilisé dans les emplacements décrits ci-dessous. Les environnements couverts par cette norme sont les sites résidentiels, les locaux commerciaux et de l'industrie légère, à la fois intérieurs et extérieurs. La liste suivante, bien que non exhaustive, donne une indication sur les sites qui sont couverts:
- propriétés résidentielles, par exemple maisons, appartements;
- lieux de vente au détail, par exemple boutiques, supermarchés;
- centres d'affaires, par exemple bureaux, banques;
- locaux de loisirs recevant du public, par exemple cinémas, bars, dancings;
- sites extérieurs, par exemple stations service, parcs de stationnement, centres de loisirs et centres sportifs;
- locaux de l'industrie légère, par exemple ateliers, laboratoires, centres de services.
Les sites qui sont caractérisés comme étant alimentés directement en basse tension par le réseau public sont considérés comme résidentiels, commerciaux ou pour l'industrie légère. L'objet de cette norme est de définir les exigences d'essais d'émissions aux perturbations continues et transitoires, conduites et rayonnées, pour les appareils définis dans le domaine d'application. Les exigences des perturbations émises ont été choisies de manière à assurer que les perturbations engendrées par l'appareil en fonctionnement normal, dans un environnement résidentiel, commercial ou de l'industrie légère, ne dépassent pas un niveau qui pourrait empêcher d'autres appareils de fonctionner comme prévu normalement. Les conditions de défaut de l'appareil ne sont pas prises en compte. Cette norme ne comporte pas, pour les besoins des essais, tous les phénomènes perturbateurs mais uniquement ceux considérés comme applicables pour les appareils couverts par la norme. Ces exigences représentent les exigences essentielles de compatibilité électromagnétique concernant les émissions. Les exigences sont spécifiées pour chacun des accès considérés. Cette version consolidée comprend la deuxième édition (2006) et son amendement 1 (2010). Il n'est donc pas nécessaire de commander l'amendement avec cette publication.
General Information
Standards Content (Sample)
IEC 61000-6-3 ®
Edition 2.1 2011-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
COMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES
Electromagnetic compatibility (EMC) –
Part 6-3: Generic standards – Emission standard for residential, commercial and
light-industrial environments
Compatibilité électromagnétique (CEM) –
Partie 6-3: Normes génériques – Norme sur l'émission pour les environnements
résidentiels, commerciaux et de l'industrie légère
IEC 61000-6-3:2006+A1:2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 61000-6-3 ®
Edition 2.1 2011-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
COMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES
Electromagnetic compatibility (EMC) –
Part 6-3: Generic standards – Emission standard for residential, commercial and
light-industrial environments
Compatibilité électromagnétique (CEM) –
Partie 6-3: Normes génériques – Norme sur l'émission pour les environnements
résidentiels, commerciaux et de l'industrie légère
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX CH
ICS 33.100.10 ISBN 978-2-88912-336-0
– 1 –
SC CIS/H/Publication IEC 61000-6-3 Amend. 1 2010, Second edition/I-SH
ELECTROMAGNETIC COMPATIBILITY (EMC) –
Part 6-3: Generic standards –
Emission standard for residential, commercial
and light-industrial environments
INTERPRETATION SHEET
This interpretation sheet has been prepared by CISPR subcommittee H: Limits for the
protection of radio services, of IEC technical committee CISPR: International special
committee on radio interference.
The text of this interpretation sheet is based on the following documents:
FDIS Report on voting
CISPR/H/217/FDIS CISPR/H/222/RVD
Full information on the voting for the approval of this interpretation sheet can be found in the
report on voting indicated in the above table.
___________
Interpretation
The requirement in Clause 8 “Measurement uncertainty” of IEC 61000-6-3 Amend. 1 ed. 2.0:
8 Measurement uncertainty
The measurement instrumentation uncertainty shall be determined according to CISPR
16-4-2, where applicable.
NOTE For a given test method, the actual value of U has only to be recorded in the test report if the
lab
value is greater than U .
CISPR
shall be interpreted as follows:
The measurement instrumentation uncertainty shall be calculated and compared with the
budgets defined in CISPR 16-4-2. For each applicable test method, whose instrumentation
uncertainty budgets are higher than those defined in CISPR 16-4-2, compliance with the limits
has to be determined according to CISPR 16-4-2 methodology. This requirement is only
applicable for tests where an uncertainty budget is defined in CISPR 16-4-2.
The additional note was further clarification that there is no need to state in the test report the
laboratory uncertainty budget U if this is less than or equal to the U defined in CISPR
lab CISPR
16-4-2. However, it has to be mentioned in the test report that the instrumentation
measurement uncertainty is determined according to CISPR16-4-2.
July 2011 ICS 33.100.10 French text overleaf
– 2 – 61000-6-3 © IEC:2006+A1:2010
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope and object . 6
2 Normative references . 7
3 Terms, definitions and abbreviations . 8
4 Conditions during testing . 10
5 Product documentation . 10
6 Applicability . 10
7 Emission requirements . 11
8 Application of limits in tests for conformity of equipment in series production
Measurement uncertainty . 11
9 Measurement uncertainty Application of limits in tests for conformity of equipment
in series production . 12
10 Compliance with this standard . 12
11 Emission test requirements . 16
Bibliography . 21
Figure 1 – Examples of ports Ports covered by Tables 1 to 4 . 8
Table 1 – Emission – Enclosure port . 16
Table 2 – Emission – Low voltage AC mains port . 18
Table 3 – Emission – DC power port . 19
Table 4 – Emission – Telecommunications/network port . 20
61000-6-3 © IEC:2006+A1:2010 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
___________
ELECTROMAGNETIC COMPATIBILITY (EMC) –
Part 6-3: Generic standards –
Emission standard for residential,
commercial and light-industrial environments
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
This consolidated version of IEC 61000-6-3 consists of the second edition (2006)
[documents CISPR/H/121/FDIS and CISPR/H/124/RVD] and its amendment 1 (2010)
[documents CISPR/H/206/FDIS and CISPR/H/210/RVD]. It bears the edition number 2.1.
The technical content is therefore identical to the base edition and its amendment and
has been prepared for user convenience. A vertical line in the margin shows where the
base publication has been modified by amendment 1. Additions and deletions are
displayed in red, with deletions being struck through.
– 4 – 61000-6-3 © IEC:2006+A1:2010
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.