EN ISO/IEC 17000:2004
(Main)Conformity assessment - Vocabulary and general principles (ISO/IEC 17000:2004)
Conformity assessment - Vocabulary and general principles (ISO/IEC 17000:2004)
IEC 60358-1:2012 applies to capacitors, with rated voltage >1 000 V, connected line to ground with the low voltage terminal either permanently earthed or connected to devices, for applications listed hereunder and other similar uses. This standard serves as basic standard for the coupling capacitor, the different parts of this standard will present the supplementary specifications and tests, for example IEC 60358-2, IEC 60358-3 or IEC 60358-4. This standard cancels and replaces the second edition of IEC 60358 (1990), and constitutes a technical revision. This edition of IEC 60358-1 includes the following significant technical changes with respect to the former edition of IEC 60358: - the standard has been split into different parts; Part 1 is the general rules and Parts 2, 3, 4 will be specific to the PLC, filters and dividers applications. - the routine and type test have been reviewed and are presented in Figure 2. Keywords: coupling capacitor, capacitor dividers
Konformitätsbewertung - Begriffe und allgemeine Grundlagen (ISO/IEC 17000:2004)
Diese Internationale Norm legt allgemeine Begriffe der Konformitätsbewertung, einschließlich der Akkreditierung von Konformitätsbewertungsstellen, und für die Anwendung der Konformitätsbewertung zur Förderung des Warenverkehrs fest. Der Anhang A enthält eine Beschreibung des funktionalen Ansatzes der Konformitätsbewertung und soll für den gesetzlich geregelten wie auch für den freiwilligen Bereich als weitere Hilfe gegenseitigen Verstehens unter den Anwendern der Konformitätsbewertung, Konformitätsbewertungsstellen und ihren Akkreditierungsstellen dienen.
Diese Internationale Norm dient nicht als Vokabular für alle Begriffe, die benötigt werden könnten, um alle Einzelheiten derbesondere Tätigkeiten der Konformitätsbewertung zu beschreiben. Benennungen und ihre Definitionen sind nur dann enthalten, wenn sich der Begriff nicht durch den allgemeinen Sprachgebrauch selbst erklärt oder wenn eine bereits bestehende genormte Definition nicht zutreffend ist.
ANMERKUNG 1 Die Anmerkungen zu den Definitionen verstehen sich als Klarstellungen oder als Beispiele zum besseren Verständnis der Begriffe. In bestimmten Fällen können dürfen die Anmerkungen aus sprachlichen Gründen in verschiedenen Sprachen unterschiedlich sein oder dürfen durch zusätzliche Anmerkungen ergänzt werden.
ANMERKUNG 2 Die Begriffe sind in einer systematischen Reihenfolge geordnet und in einem alphabetischen Stichwortverzeichnis erfasst. Eine Benennung in einer Definition oder Anmerkung, die an anderer Stelle definiert ist, ist fett gedruckt. Ihr folgt die in runde Klammern gesetzte Abschnittsnummer. Eine derartig fett gedruckte Benennung kann in der Definition durch ihre vollständige Definition ersetzt werden.
Evaluation de la conformité - Vocabulaire et principes généraux (ISO/IEC 17000:2004)
La CEI 60358-1:2012 s'applique aux condensateurs, avec une tension assignée >1 000 V, connectés entre la ligne et la terre avec la borne basse tension connectée de manière permanente à la terre ou connectée à des dispositifs, pour les applications énumérées ci-dessous et d'autres utilisations semblables. La présente norme sert de norme de base pour le condensateur de couplage, les différentes parties de la présente norme présenteront les essais et les spécifications supplémentaires, par exemple la CEI 60358-2, la CEI 60358-3 ou la CEI 60358-4. La présente norme annule et remplace la deuxième édition de la CEI 60358 (1990) et constitue une révision technique. La présente édition de la CEI 60358-1 inclut les modifications techniques suivantes par rapport à la dernière édition de la CEI 60358: - la norme a été partagée en 4 parties; la Partie 1 présente les règles générales et les Parties 2, 3, 4 sont spécifiques aux applications aux fréquences des courants porteurs sur lignes d'énergie (CPL), aux filtres et aux diviseurs; - les essais de routine et de type ont été revus et sont présentés en Figure 2. Mots clé: condensateur de couplage, diviseur capacitifs
Sklopni kondenzatorji in kondenzatorski delilniki - 1. del: Splošna določila
Ta del standarda IEC 60358 se uporablja za: • kondenzatorje z naznačeno napetostjo > 1 000 V, ki so z linijo na zemljo povezani prek nizkonapetostnega priključka, stalno ozemljeni ali povezani z napravami, za spodaj navedene in druge podobne namene. Ta standard je temeljni standard za sklopne kondenzatorje; v različnih delih tega standarda, npr. IEC 60358-2, IEC 60358-3 ali IEC 60358-4, bodo predstavljene dodatne specifikacije in preskusi.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2012
1DGRPHãþD
SIST HD 597 S1:2001
6NORSQLNRQGHQ]DWRUMLLQNRQGHQ]DWRUVNLGHOLOQLNLGHO 6SORãQDGRORþLOD
Coupling capacitors and capacitor dividers - Part 1: General rules
Kopplungskondensatoren und kapazitive Teiler - Teil 1: Allgemeine Bestimmungen
Condensateurs de couplage et diviseurs capacitifs - Partie 1: Règles générales
Ta slovenski standard je istoveten z: EN 60358-1:2012
ICS:
31.060.99 Drugi kondenzatorji Other capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60358-1
NORME EUROPÉENNE
August 2012
EUROPÄISCHE NORM
ICS 29.120.99; 29.240.99; 31.060.70 Supersedes HD 597 S1:1992 (partially)
English version
Coupling capacitors and capacitor dividers -
Part 1: General rules
(IEC 60358-1:2012)
Condensateurs de couplage et diviseurs Kopplungskondensatoren und kapazitive
capacitifs - Teiler -
Partie 1: Règles générales Teil 1: Allgemeine Bestimmungen
(CEI 60358-1:2012) (IEC 60358-1:2012)
This European Standard was approved by CENELEC on 2012-07-17. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60358-1:2012 E
EN 60358-1:2012 - 2 -
Foreword
The text of document 33/499/FDIS, future edition 1 of IEC 60358-1, prepared by IEC/TC 33, "Power
capacitors" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60358-
1:2012.
The following dates are fixed:
(dop) 2013-04-17
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-07-17
standards conflicting with the
document have to be withdrawn
This document supersedes HD 597 S1:1992 (partially).
EN 60358-1:2012 includes the following significant technical changes with respect to HD 597 S1:1992:
– The standard has been split into different parts; Part 1 is the general rules and Parts 2, 3, 4 will be
specific to the PLC, filters and dividers applications.
– The routine and type test have been reviewed and are presented in Figure 2.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed
for Use within Certain Voltage Limits (LVD - 2006/95/EC).
Endorsement notice
The text of the International Standard IEC 60358-1:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60060-2 NOTE Harmonized as EN 60060-2.
IEC 60085 NOTE Harmonized as EN 60085.
1)
IEC 60358-2 NOTE Harmonized as EN 60358-2 .
IEC 60422 NOTE Harmonized as EN 60422.
IEC 61869-5 NOTE Harmonized as EN 61869-5.
IEC 62155 NOTE Harmonized as EN 62155.
CISPR 16-1-1 NOTE Harmonized as EN 55016-1-1.
1)
To be published.
- 3 - EN 60358-1:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60038 (mod) - IEC standard voltages EN 60038 -
IEC 60050-321 1986 International Electrotechnical vocabulary - - -
Chapter 321: Instrument transformers
IEC 60050-436 1990 International Electrotechnical Vocabulary - -
(IEV) -
Chapter 436: Power capacitors
IEC 60050-601 1985 International Electrotechnical Vocabulary - -
(IEV) -
Chapter 601: Generation, transmission and
distribution of electricity - General
IEC 60050-604 1987 International Electrotechnical Vocabulary - -
(IEV) -
Chapter 604: Generation, transmission and
distribution of electricity - Operation
IEC 60060-1 - High-voltage test techniques - EN 60060-1 -
Part 1: General definitions and test
requirements
IEC 60068-2-17 - Environmental testing - EN 60068-2-17 -
Part 2: Tests - Test Q: Sealing
IEC 60071-1 - Insulation co-ordination - EN 60071-1 -
Part 1: Definitions, principles and rules
IEC 60270 - High-voltage test techniques - EN 60270 -
Partial discharge measurements
IEC 60721 Series Classification of environmental conditions EN 60721 Series
IEC 61462 - Composite hollow insulators - Pressurized EN 61462 -
and unpressurized insulators for use in
electrical equipment with rated voltage greater
than 1 000 V - Definitions, test methods,
acceptance criteria and design
recommendations
CISPR/TR 18-2 - Radio interference characteristics of overhead - -
power lines and high-voltage equipment -
Part 2: Methods of measurement and
procedure for determining limits
IEC 60358-1 ®
Edition 1.0 2012-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Coupling capacitors and capacitor dividers –
Part 1: General rules
Condensateurs de couplage et diviseurs capacitifs –
Partie 1: Règles générales
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX X
ICS 29.120.99; 29.240.99; 31.060.70 ISBN 978-2-83220-120-6
– 2 – 60358-1 © IEC:2012
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references. 8
3 Terms and definitions . 9
3.1 General terms and definitions . 9
3.2 Coupling capacitor terms and definitions . 12
4 Service conditions. 13
4.1 General . 13
4.2 Normal service conditions . 14
4.2.1 Ambient air temperature . 14
4.2.2 Altitude . 14
4.2.3 Vibrations or earthquakes . 14
4.2.4 Other service conditions for indoor equipment . 14
4.2.5 Other service conditions for outdoor equipment . 14
4.3 Special service conditions . 15
4.3.1 General . 15
4.3.2 Altitude . 15
4.3.3 Ambient temperature . 15
4.3.4 Earthquakes . 16
4.4 System earthing . 16
5 Ratings . 16
5.1 Standard values of rated frequency . 16
5.2 Standard values of rated voltages . 16
5.2.1 Rated voltages U for a.c. . 16
R
5.2.2 Rated voltages U for d.c. . 16
R
5.3 Standard values of rated voltage factor . 17
5.3.1 standard values of rated voltage factor for a.c. voltages . 17
5.3.2 Standard values of rated voltage factor for d.c. voltages . 17
6 Design requirements . 18
6.1 Insulation requirements . 18
6.2 Other insulation requirements . 20
6.2.1 Low voltage terminal not exposed to weather . 20
6.2.2 Low voltage terminal exposed to weather . 20
6.2.3 Partial discharges . 21
6.2.4 Chopped lightning impulse test . 21
6.2.5 Capacitance at power frequency . 21
6.2.6 Losses of the capacitor at power frequency . 22
6.2.7 External insulation requirements . 23
6.3 Electromagnetic emission requirements – Radio interference voltage (RIV) . 23
6.4 Mechanical requirements . 23
6.5 Tightness of equipment. 24
6.5.1 General . 24
6.5.2 Gas tightness . 24
6.6 Voltage grading for d.c. capacitors . 25
60358-1 © IEC:2012 – 3 –
7 Test conditions . 25
8 Classification of tests . 26
8.1 General . 26
8.2 Routine tests . 26
8.3 Type tests . 26
8.4 Special tests . 27
9 Routine tests . 28
9.1 Tightness of the liquid-filled equipment . 28
9.1.1 General . 28
9.1.2 Closed pressure systems for gas . 29
9.2 Electrical routin
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.