EN IEC 60115-4-10:2026/A11:2026
(Amendment)Fixed resistors for use in electronic equipment - Part 4-10: Blank detail specification: Power resistors with axial leads for through-hole assembly on circuit boards (THT), for general electronic equipment, classification level G
Fixed resistors for use in electronic equipment - Part 4-10: Blank detail specification: Power resistors with axial leads for through-hole assembly on circuit boards (THT), for general electronic equipment, classification level G
This part of IEC 60115 is applicable to fixed power resistors with axial leads for through hole assembly (THT) on circuit boards for use in electronic equipment. The document is applicable to the drafting of detail specifications for fixed low-power film resistors with leads classified to level G, which is defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. This detail specification is based upon the blank detail specification IEC 60115-4-10:202X. This detail specification establishes test schedules and performance requirements permitting the quality assessment of the resistors covered herein according to the quality assessment procedures prescribed by IEC 60115-1:2020, Annex Q.
Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 4-10: Vordruck für Bauartspezifikation: Leistungswiderstände mit axialen Anschlüssen für die Durchsteckmontage auf Leiterplatten (THT), für Geräte der Elektronik, Klassifizierungsstufe G
Résistances fixes utilisées dans les équipements électroniques - Partie 4-10: Spécification particulière cadre: Résistance de puissance à pattes axiales pour montage par trous traversants sur circuits imprimés (THT), pour équipement électronique général, classification niveau G
Stalni upori za elektronsko opremo - 4-10. del: Okvirna podrobna specifikacija - Močnostni upori z aksialnimi priključki za montažo skozi prehodne luknje tiskanih vezij (THT) za univerzalno elektronsko opremo, razvrščeni kot nivo G - Dopolnilo AA
General Information
- Status
- Not Published
- Publication Date
- 02-Jul-2026
- Technical Committee
- CLC/TC 40XB - CLC/TC 40XB
- Drafting Committee
- CLC/TC 40XB - CLC/TC 40XB
- Current Stage
- 4060 - Enquiry results established and sent to TC, SR, BTTF - Enquiry
- Start Date
- 09-Jan-2026
- Due Date
- 28-Nov-2025
- Completion Date
- 09-Jan-2026
Relations
- Effective Date
- 01-Oct-2024
Overview
EN IEC 60115-4-10:2026/A11:2026 is a key standard developed by CLC, addressing the requirements for fixed power resistors with axial leads designed for through-hole technology (THT) assembly on circuit boards. The standard applies to resistors intended for general electronic equipment, specifically those classified at level G according to IEC 60115-1:2020. These resistors are typically used in consumer products and telecommunication user terminals, operating in benign or moderate environments where functional performance is the primary requirement.
This document serves as a blank detail specification that aids in the drafting of specific resistor specifications and provides quality assessment procedures for consistent performance and reliability in electronic assemblies.
Key Topics
Scope and Application
- Covers power resistors with axial leads for THT, commonly used in PCBs for wide-ranging electronics.
- Focuses on level G classification, suitable for general environments and non-critical applications.
Specification Structure
- Offers a framework for creating detailed specifications based on common resistor characteristics.
- Includes guidance on identification, marking codes, termination plating, and mechanical dimensions.
Quality Assessment and Testing
- Establishes test schedules aligned with IEC 60115-1:2020, Annex Q, ensuring consistent product performance.
- Details requirements for quality control through standardized assessment procedures.
Cross-Referencing and Revision Management
- Provides comprehensive annexes for referencing previous versions, ensuring clarity during specification updates.
- Supports transition from older standards such as EN 140201:1996 with clearly mapped cross-references.
Applications
Resistors conforming to EN IEC 60115-4-10:2026/A11:2026 are integral to a variety of general electronic equipment applications, including:
- Consumer Electronics: Television sets, audio equipment, and other household devices where stable resistance and reliability are needed without rigorous environmental exposure.
- Telecommunication Devices: User terminals, control units, and interface boards that operate in controlled conditions.
- Industrial Controls and Instruments: Low-stress environments with moderate temperature and humidity, where the major concern is functional continuity rather than extreme durability.
- Educational and Development Boards: Prototyping and instructional platforms that demand standardized, repeatable component performance.
The axial lead through-hole assembly format continues to be favored for ease of handling and robust mechanical connection, especially in products where automated surface-mount technology (SMT) is not required.
Related Standards
The standard references and aligns with several other international and European standards to ensure consistency and compatibility within the broader field of electronic passive components:
- IEC 60115-1:2020 – Fixed resistors for use in electronic equipment – Part 1: Generic specification
- IEC 60115-4:2022 – Fixed resistors for electronic equipment – Sectional specification for power resistors
- IEC 60062 – Marking codes for resistors and capacitors
- IEC 60063 – Preferred number series for resistors and capacitors
- IEC 60286-1 – Packaging of components with axial leads
- IEC 60294 – Measurement of dimensions for cylindrical resistors
- IEC 60301 – Preferred wire termination diameters
- IEC 61193-2:2007 – Quality assessment systems for electronic components
These related standards ensure that EN IEC 60115-4-10:2026/A11:2026 fits neatly within the globally harmonized system for electronic component quality, reliability, and interchangeability.
By adhering to this standard, manufacturers and specifiers guarantee that general-purpose power resistors with axial leads meet industry requirements for function, reliability, and compliance, supporting efficient and robust electronic equipment design.
Frequently Asked Questions
EN IEC 60115-4-10:2026/A11:2026 is a draft published by CLC. Its full title is "Fixed resistors for use in electronic equipment - Part 4-10: Blank detail specification: Power resistors with axial leads for through-hole assembly on circuit boards (THT), for general electronic equipment, classification level G". This standard covers: This part of IEC 60115 is applicable to fixed power resistors with axial leads for through hole assembly (THT) on circuit boards for use in electronic equipment. The document is applicable to the drafting of detail specifications for fixed low-power film resistors with leads classified to level G, which is defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. This detail specification is based upon the blank detail specification IEC 60115-4-10:202X. This detail specification establishes test schedules and performance requirements permitting the quality assessment of the resistors covered herein according to the quality assessment procedures prescribed by IEC 60115-1:2020, Annex Q.
This part of IEC 60115 is applicable to fixed power resistors with axial leads for through hole assembly (THT) on circuit boards for use in electronic equipment. The document is applicable to the drafting of detail specifications for fixed low-power film resistors with leads classified to level G, which is defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. This detail specification is based upon the blank detail specification IEC 60115-4-10:202X. This detail specification establishes test schedules and performance requirements permitting the quality assessment of the resistors covered herein according to the quality assessment procedures prescribed by IEC 60115-1:2020, Annex Q.
EN IEC 60115-4-10:2026/A11:2026 is classified under the following ICS (International Classification for Standards) categories: 31.040.10 - Fixed resistors. The ICS classification helps identify the subject area and facilitates finding related standards.
EN IEC 60115-4-10:2026/A11:2026 has the following relationships with other standards: It is inter standard links to EN IEC 60115-4-10:2026. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN IEC 60115-4-10:2026/A11:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2025
Stalni upori za elektronsko opremo - 4-10. del: Okvirna podrobna specifikacija -
Močnostni upori z aksialnimi priključki za montažo skozi prehodne luknje tiskanih
vezij (THT) za univerzalno elektronsko opremo, razvrščeni kot nivo G - Dopolnilo
AA
Fixed resistors for use in electronic equipment - Part 4-10: Blank detail specification:
Power resistors with axial leads for through-hole assembly on circuit boards (THT), for
general electronic equipment, classification level G
Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 4-10: Vordruck für
Bauartspezifikation: Leistungswiderstände mit axialen Anschlüssen für die
Durchsteckmontage auf Leiterplatten (THT), für Geräte der Elektronik,
Klassifizierungsstufe G
Résistances fixes utilisées dans les équipements électroniques - Partie 4-10:
Spécification particulière cadre: Résistance de puissance à pattes axiales pour montage
par trous traversants sur circuits imprimés (THT), pour équipement électronique général,
classification niveau G
Ta slovenski standard je istoveten z: prEN IEC 60115-4-10:2025/prAA:2025
ICS:
31.040.10 Fiksni upor Fixed resistors
oSIST prEN IEC 60115-4- en
10:2025/oprAA:2025
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD DRAFT
prEN IEC 60115-4-10:2025
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
October 2025
ICS 31.040.10 -
English Version
Fixed resistors for use in electronic equipment - Part 4-10: Blank
detail specification: Power resistors with axial leads for through-
hole assembly on circuit boards (THT), for general electronic
equipment, classification level G
Résistances fixes utilisées dans les équipements Festwiderstände zur Verwendung in Geräten der Elektronik
électroniques - Partie 4-10: Spécification particulière cadre: - Teil 4-10: Vordruck für Bauartspezifikation:
Résistance de puissance à pattes axiales pour montage par Leistungswiderstände mit axialen Anschlüssen für die
trous traversants sur circuits imprimés (THT), pour Durchsteckmontage auf Leiterplatten (THT), für Geräte der
équipement électronique général, classification niveau G Elektronik, Klassifizierungsstufe G
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 60115-4-10:2025; it is submitted to CENELEC
members for enquiry.
Deadline for CENELEC: 2026-01-09.
It has been drawn up by CLC/TC 40XB.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 80569 Ref. No. prEN IEC 60115-4-10:2025/prAA:2025 E
prEN IEC 60115-4-10:2025/prAA:2025 (E)
1 Contents Page
2 European foreword 3
3 1 Modification to subclause 0.3, “Identification of the detail specification and the resistor” 4
4 2 Modification to the title proposed for the detail specification 4
5 3 Modification to Annex X, “Cross-reference for references to the prior revision of this
6 specification” 4
7 4 Addition of annexes 4
8 Annex ZA (normative) Normative references to international publications with their corresponding
9 European publications 5
10 Annex ZX (informative) Cross-references for references to the prior revision of this document 7
prEN 60115-4-10:2025/prAA:2025 (E)
12 European foreword
13 This document (prEN 60115-4-10:2025/prAA:2025) has been prepared by CLC/TC 40XB, “Resistors”.
14 This document is currently submitted to the Enquiry.
15 The following dates are proposed:
• latest date by which the existence of this document (doa) dav + 6 months
has to be announced at national level
• latest date by which this document has to be (dop) dav + 12 months
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) dav + 36 months
conflicting with this document have to be withdrawn (to be confirmed or
modified when voting)
16 Previous documents on the subject covered by this specification have been:
17 — EN 140202:1996-11
18 — EN 140203:1996-11
19 — CECC 40 201:1981-00
20 — CECC 40 202:1981-00
21 — CECC 40 203:1981-00
22 Clauses, subclauses, annexes, notes, tables and figures which are additional to those in IEC 60115-4-10:2023
23 are prefixed “Z”.
oSI
...