General Information

Abstract

Status
Not Published
Publication Date
20-Dec-2026
Current Stage
5060 - Voting results sent to TC, SR - Formal Approval
Start Date
18-Sep-2026
Completion Date
18-Sep-2026

Buy Documents

Draft

prEN IEC 60704-2-8:2026

English language (12 pages)
Preview
Preview
e-Library read for
1 day

Overview

FprEN IEC 60704-2-8:2026 outlines the test code methodology for determining airborne acoustical noise emitted by electric shavers, hair clippers, or trimmers intended for household and similar use. Published by CLC and harmonized with the International Electrotechnical Commission (IEC), this standard specifies particular requirements for laboratory testing, providing a reliable way to measure and declare the noise emission levels of these small electrical appliances. It effectively supplements and modifies the general requirements provided in IEC 60704-1:2021, building on standardized approaches for reproducibility and uniformity across the European market.

Key Topics

  • Scope and Applicability

    • Applies to electrically powered shavers, hair clippers, and trimmers, including mains- and battery-powered devices.
    • Can also be used, where appropriate, for analogous devices such as electrically operated depilators.
    • Excludes devices powered by non-electrical means.
  • Measurement Methods

    • Specifies procedures for direct and comparison methods in different acoustical environments, including reverberation and hard-walled rooms.
    • Emphasizes consideration of audible discrete tones and the potential need for additional microphone positions as per ISO 3743-1, ISO 3743-2, and ISO 3744.
  • Testing Procedures

    • Details pre-conditioning requirements such as cleaning and lubrication.
    • Dictates appliance setup: position, operation at highest speed, and stabilization routines.
    • Requires measurements to be performed with fully charged or loaded batteries, disconnected from any external power sources for rechargeable devices.
    • Measurements are performed under no-load conditions, using the settings or accessories that yield the highest noise emission.
  • Noise Data Recording and Reporting

    • Stipulates recording of relevant operational and environmental data during testing.
    • Specifies periods for averaging the A-weighted sound pressure level, particularly accommodating appliances with operational cycles.

Applications

  • Product Development

    • Enables manufacturers to consistently assess and compare the acoustical noise of electric shavers, hair clippers, and trimmers during design and quality control processes.
    • Supports the identification and mitigation of high-noise components to improve user comfort and product competitiveness.
  • Compliance and Market Access

    • Required for demonstrating conformity with European and international noise emission regulations.
    • Facilitates accurate, repeatable declarations of noise emissions necessary for product labels and supporting documentation throughout the EU and global markets.
  • Consumer Information

    • Provides standardized information for consumers to make informed purchasing decisions based on verified noise emission levels.
    • Encourages the development of quieter household grooming devices.
  • Testing Laboratories

    • Establishes a common framework for laboratories conducting accredited noise emission measurements on small household appliances.

Related Standards

  • IEC 60704-1:2021 - General requirements for airborne acoustical noise measurement of household electrical appliances.
  • IEC 61254 - Evaluation of experience and user satisfaction for electric shavers for household use.
  • IEC 62863:2017 - Performance measurement methods for electric hair clippers or trimmers for household use.
  • ISO 3743-1/2 & ISO 3744 - Acoustic measurement standards referenced for test environment criteria and procedures.

FprEN IEC 60704-2-8:2026 not only harmonizes test methods in line with the latest edition of IEC 60704-1, but also introduces updates in stabilization period definitions, battery status checks, and appliance positioning-all critical for accurate and reproducible noise emission assessments. Adhering to this standard is essential for industry stakeholders aiming for regulatory compliance, enhanced product value, and greater user satisfaction in the field of household grooming appliances.

Relations

Effective Date
14-Jan-2025

Buy Documents

Draft

prEN IEC 60704-2-8:2026

English language (12 pages)
Preview
Preview
e-Library read for
1 day

Get Certified

Connect with accredited certification bodies for this standard

BSMI (Bureau of Standards, Metrology and Inspection)

Taiwan's standards and inspection authority.

TAF Taiwan Verified

Sponsored listings

Frequently Asked Questions

FprEN IEC 60704-2-8:2026 is a draft published by CLC. Its full title is "Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-8: Particular requirements for electric shavers, hair clippers or trimmers". This standard covers: Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-8: Particular requirements for electric shavers, hair clippers or trimmers

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-8: Particular requirements for electric shavers, hair clippers or trimmers

FprEN IEC 60704-2-8:2026 is classified under the following ICS (International Classification for Standards) categories: 17.140.20 - Noise emitted by machines and equipment; 97.170 - Body care equipment. The ICS classification helps identify the subject area and facilitates finding related standards.

FprEN IEC 60704-2-8:2026 has the following relationships with other standards: It is inter standard links to EN IEC 60704-2-8:2020. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

FprEN IEC 60704-2-8:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
oSIST prEN IEC 60704-2-8:2026
01-april-2026
Gospodinjski in podobni električni aparati - Preskuševalni kod za ugotavljanje
zvočnega hrupa v zraku - 2-8. del: Posebne zahteve za električne brivnike,
strižnike ali prirezovalnike
Household and similar electrical appliances - Test code for the determination of airborne
acoustical noise - Part 2-8: Particular requirements for electric shavers, hair clippers or
trimmers
Elektrische Geräte für den Hausgebrauch und ähnliche Zwecke - Prüfvorschrift für die
Bestimmung der Luftschallemission - Teil 2-8: Besondere Anforderungen an elektrische
Rasierer und Haarschneidemaschinen oder Haartrimmer
Appareils électrodomestiques et analogues - Code d'essai pour la détermination du bruit
aérien - Partie 2-8: Exigences particulières pour les rasoirs et les tondeuses à barbe ou
à cheveux électriques
Ta slovenski standard je istoveten z: prEN IEC 60704-2-8:2026
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
97.170 Oprema za nego telesa Body care equipment
oSIST prEN IEC 60704-2-8:2026 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN IEC 60704-2-8:2026
oSIST prEN IEC 60704-2-8:2026
59L/310/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60704-2-8 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2026-02-27 2026-05-22
SUPERSEDES DOCUMENTS:
59L/293/CD, 59L/300/CC
IEC SC 59L : SMALL HOUSEHOLD APPLIANCES
SECRETARIAT: SECRETARY:
Italy Mr Davide Pietrosemoli
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):

ASPECTS CONCERNED:
Environment
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which t hey
are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clau ses
to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC
clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Household and similar electrical appliances - Test code for the determination of airborne acoustical
noise - Part 2-8: Particular requirements for electric shavers, hair clippers or trimmers

PROPOSED STABILITY DATE: 2029
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

oSIST prEN IEC 60704-2-8:2026
IEC CDV 60704-2-8 © IEC 2026
1 CONTENTS
2 CONTENTS . 1
3 FOREWORD . 2
4 INTRODUCTION . 4
5 1 Scope . 5
6 3 Terms and definitions . 5
7 4 Measurement methods and acoustical environments . 5
8 4.5 Measurement uncertainties . 6
9 6 Operation and location of appliances under test . 6
10 7 Measurement of sound pressure levels . 9
11 9 Information to be recorded . 9
12 10 Information to be reported . 9
13 Annexes . 10
14 Annex B (normative) Test enclosure . 10
15 Bibliography . 11
17 Figure 101 – Isometric position views of the shaver, hair clipper or trimmer . 12
19 Table 101 – Standard deviations of sound power levels . 7
20 Table 102 – Standard deviations for declaration and verification . 7
oSIST prEN IEC 60704-2-8:2026
IEC CDV 60704-2-8 © IEC 2026
23 INTERNATIONAL ELECTROTECHNICAL COMMISSION
24 _____________
26 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
27 TEST CODE FOR THE DETERMINATION OF
28 AIRBORNE ACOUSTICAL NOISE –
30 Part 2-8: Particular requirements for electric shavers,
31 hair clippers or trimmers
33 FOREWORD
34 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
35 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
36 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
37 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
38 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
39 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
40 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
41 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
42 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
43 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
44 consensus of opinion on the relevant subjects since each technical committee has representation from all
45 interested IEC National Committees.
46 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
47 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
48 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
49 misinterpretation by any end user.
50 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
51 transparently to the maximum extent possible in their national and regional publications. Any divergence between
52 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
53 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
54 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
55 services carried out by independent certification bodies.
56 6) All users should ensure that they have the latest edition of this publication.
57 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
58 members of its technical committees and IEC National Committees for any personal injury, property damage or
59 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
60 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
61 Publications.
62 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
63 indispensable for the correct application of this publication.
64 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
65 rights. IEC shall not be held responsible for identifying any or all such patent rights.
66 International Standard IEC 60704-2-8 has been prepared by subcommittee 59L: Small
67 household appliances, of IEC technical committee 59: Performance of household and similar
68 electrical appliances.
69 This third edition cancels and replaces the second edition published in 2020. This edition
70 constitutes a technical revision.
71 This edition includes the following significant technical changes with respect to the previous
72 edition:
73 a) it is adjusted with respect to IEC 60704-1:2021;
74 b) stabilizing period and check of the battery status has been redefined;
75 c) position of the appliance during test redefined.
oSIST prEN IEC 60704-2-8:2026
IEC CDV 60704-2-8 © IEC 2026
76 The text of this standard is based on the following documents:
FDIS Report on voting
xxx/xxx/FDIS xxx/xxx/RVD
78 Full information on the voting for the approval of this standard can be found in the report on
79 voting indicated in the above table.
80 This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
81 This Part 2-8 is intended to be used in conjunction with fourth edition of IEC 60704-1:2021,
82 Household and similar electrical appliances – Test code for the determination of airborne
83 acoustical noise – Part 1: General requirements.
84 The relevant text of IEC 60704-1:2021 as amended by this standard establishes the test code
85 for shavers, hair clippers or trimmers.
86 This Part 2-8 supplements or modifies the corresponding clauses in IEC 60704-1:2021, so as
87 to establish the test code for shavers, hair clippers or trimmers. When a particular subclause of
88 IEC 60704-1:2021 is not mentioned in this Part 2-8, that subclause is applicable as far as
89 reasonable. Where this standard states "addition", "modification" or "replacement", the relevant
90 requirements, test specifications or explanatory matter in IEC 60704-1:2021 shall be adapted
91 accordingly.
92 Subclauses, tables and figures that are numbered starting from 101 are additional to those in
93 IEC 60704-1:2021.
94 Unless notes are in a new subclause or involve notes in IEC 60704-1:2021, they are numbered
95 starting from 101, including those in a replaced clause or subclause.
96 Additional a
...