EN 60317-32:1996/A2:2005

SLOVENSKI STANDARD
01-februar-2006
6SHFLILNDFLMH]DSRVHEQHYUVWHQDYLMDOQLKåLFGHO%DNUHQDåLFDVSUDYRNRWQLP
SUHUH]RPJRODDOLHPDMOLUDQDRYLWD]RSWLþQLPLYODNQLLQLPSUHJQLUDQDVVPRORDOL
ODNRPWHPSHUDWXUQLLQGHNV
Specifications for particular types of winding wires -- Part 32: Glass-fibre wound, resin or
varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten -- Teil 32:
Flachdrähte aus Kupfer, blank oder lackisoliert, umhüllt mit Glasgewebe und imprägniert,
Temperaturindex 155
Spécifications pour types particuliers de fils de bobinage -- Partie 32: Fil de section
rectangulaire en cuivre nu ou émaillé guipé de fibres de verre imprégnées de vernis ou
de résine, d'indice de température 155
Ta slovenski standard je istoveten z: EN 60317-32:1996/A2:2005
ICS:
29.060.10 Žice Wires
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60317-32/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2005

ICS 29.060.10
English version
Specifications for particular types of winding wires
Part 32: Glass-fibre wound, resin or varnish impregnated,
bare or enamelled rectangular copper wire,
temperature index 155
(IEC 60317-32:1990/A2:2005)
Spécifications pour types particuliers  Technische Lieferbedingungen für
de fils de bobinage bestimmte Typen von Wickeldrähten
Partie 32: Fil de section rectangulaire Teil 32: Flachdrähte aus Kupfer,
en cuivre nu ou émaillé blank oder lackisoliert, umhüllt
guipé de fibres de verre mit Glasgewebe und imprägniert,
imprégnées de vernis ou de résine, Temperaturindex 155
d'indice de température 155 (IEC 60317-32:1990/A2:2005)
(CEI 60317-32:1990/A2:2005)
This amendment A2 modifies the European Standard EN 60317-32:1996; it was approved by CENELEC
on 2005-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60317-32:1996/A2:2005 E

Foreword
The text of document 55/966/FDIS, future amendment 2 to IEC 60317-32:1990, prepared by
IEC TC 55, Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as amendment A2 to EN 60317-32:1996 on 2005-11-01.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2006-09-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2008-11-01
__________
Endorsement notice
The text of amendment 2:2005 to the International St
...