EN 10264-1:2002
(Main)Steel wire and wire products - Steel wire for ropes - Part 1: General requirements
General Information
- Abstract
This part of this European Standard defines the general requirements for wire for ropes. Additional requirements are given in the following parts of this standard, which are specific to each category of wire. This standard specifies: - dimensional tolerances; - mechanical characteristics; - requirements relating to the chemical composition of the steel wire; - conditions to be satisfied by any coating.
- Status
- Withdrawn
- Publication Date
- 19-Mar-2002
- Withdrawal Date
- 10-Jan-2012
- Technical Committee
- ECISS/TC 106 - Wire rod and wires
- Drafting Committee
- ECISS/TC 30/SC 1 - Wire coatings
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 11-Jan-2012
- Completion Date
- 11-Jan-2012
Relations
- Replaced By
EN 10264-1:2012 - Steel wire and wire products - Steel wire for ropes - Part 1: General requirements - Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Child
EN 10264-4:2002 - Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire - Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10264-1:2002 is a standard published by the European Committee for Standardization (CEN). Its full title is "Steel wire and wire products - Steel wire for ropes - Part 1: General requirements". This standard covers: This part of this European Standard defines the general requirements for wire for ropes. Additional requirements are given in the following parts of this standard, which are specific to each category of wire. This standard specifies: - dimensional tolerances; - mechanical characteristics; - requirements relating to the chemical composition of the steel wire; - conditions to be satisfied by any coating.
This part of this European Standard defines the general requirements for wire for ropes. Additional requirements are given in the following parts of this standard, which are specific to each category of wire. This standard specifies: - dimensional tolerances; - mechanical characteristics; - requirements relating to the chemical composition of the steel wire; - conditions to be satisfied by any coating.
EN 10264-1:2002 is classified under the following ICS (International Classification for Standards) categories: 77.140.65 - Steel wire, wire ropes and link chains. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10264-1:2002 has the following relationships with other standards: It is inter standard links to EN 10264-1:2012, EN 12385-1:2002+A1:2008; is excused to EN 10264-4:2002, EN 10264-2:2002, EN 10264-3:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10264-1:2002 is associated with the following European legislation: Standardization Mandates: M/005. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10264-1:2002 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 1: Allgemeine AnforderungenFils et produits tréfilés en acier - Fils pour câbles - Partie 1: Prescriptions généralesSteel wire and wire products - Steel wire for ropes - Part 1: General requirements77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chainsICS:Ta slovenski standard je istoveten z:EN 10264-1:2002SIST EN 10264-1:2003en01-april-2003SIST EN 10264-1:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10264-1March 2002ICS 77.140.65English versionSteel wire and wire products - Steel wire for ropes - Part 1:General requirementsFils et produits tréfilés en acier - Fils pour câbles - Partie 1:Prescriptions généralesStahldraht und Drahterzeugnisse - Stahldraht für Seile -Teil 1: Allgemeine AnforderungenThis European Standard was approved by CEN on 20 January 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10264-1:2002 ESIST EN 10264-1:2003
Definition of terms relating to sampling and acceptance.9A.1Batch.9A.2Unit, production unit.9A.3Base unit for sampling (m1).9A.4Size of batch (N).9A.5Sample for testing.10A.6Sampling length.10A.7Sampling.10A.8Sample size (n).10A.9Defect.10A.10Defective length.10SIST EN 10264-1:2003
...