EN 14017:2005+A2:2009
(Main + Amendment)Agricultural and forestry machinery - Solid fertilizer distributors - Safety
General Information
- Abstract
This European Standard, applied together with EN 1553:1999, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled fertilizer distributors for solid fertilizer application, i.e. full width solid fertilizer distributors, solid fertilizer broadcasters, distributors with oscillating tube and line-distributors as well as solid fertilizer distributors driven by an auxiliary engine to be used by one operator only, used in agriculture, horticulture and in forestry. In addition, this European Standard specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this European Standard are different from those which are stated in EN 1553:1999 the requirements of this European Standard take precedence over the requirements of EN 1553:1999 for machines that have been designed and built according to the provisions of this European Standard.
It does not apply to:
- combined seed and fertilizer drills;
- machines for distributing granulated pesticides;
- pedestrian controlled distributors;
- knapsack distributors.
This European Standard deals with all the significant hazards, hazardous situations and events relevant to solid fertilizer distributors, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4), excepting the hazards arising from:
- inadequate lighting of moving/working area;
- inadequate visibility from drivers/operators position;
- inadequate seating;
- travelling functions (drive, braking etc.);
- rolling over;
- equipment for loading fertilizer into the machine;
- an auxiliary engine.
It is not applicable to electromagnetic compatibility (EMC) nor to environmental hazards (except noise). These aspects are covered by EN 13739-1:2003, EN 13739-2:2003, EN 13740-1:2003 and EN 13740-2:2003.
- Status
- Withdrawn
- Publication Date
- 30-Jun-2009
- Withdrawal Date
- 22-Sep-2026
- Technical Committee
- CEN/TC 144 - Tractors and machinery for agriculture and forestry
- Drafting Committee
- CEN/TC 144/WG 3 - Mobile machines and trailers
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 23-May-2018
- Completion Date
- 23-Sep-2026
- Directive
- Harmonized Standard2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)OJ Ref: C, C 214, C 309 OJ Date: 18-Dec-2009
Not Harmonized98/37/EC - Machinery
Relations
- Merged From
EN 14017:2005+A1:2008 - Agricultural and forestry machinery - Solid fertilizer distributors - Safety - Effective Date
- 06-May-2009
- Effective Date
- 08-Jun-2022
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Control Union Certifications
Global certification for agriculture and sustainability.
ECOCERT
Organic and sustainability certification.
FSC International
Forest Stewardship Council certification.
Sponsored listings
Frequently Asked Questions
EN 14017:2005+A2:2009 is a standard published by the European Committee for Standardization (CEN). Its full title is "Agricultural and forestry machinery - Solid fertilizer distributors - Safety". This standard covers: This European Standard, applied together with EN 1553:1999, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled fertilizer distributors for solid fertilizer application, i.e. full width solid fertilizer distributors, solid fertilizer broadcasters, distributors with oscillating tube and line-distributors as well as solid fertilizer distributors driven by an auxiliary engine to be used by one operator only, used in agriculture, horticulture and in forestry. In addition, this European Standard specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. When requirements of this European Standard are different from those which are stated in EN 1553:1999 the requirements of this European Standard take precedence over the requirements of EN 1553:1999 for machines that have been designed and built according to the provisions of this European Standard. It does not apply to: - combined seed and fertilizer drills; - machines for distributing granulated pesticides; - pedestrian controlled distributors; - knapsack distributors. This European Standard deals with all the significant hazards, hazardous situations and events relevant to solid fertilizer distributors, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4), excepting the hazards arising from: - inadequate lighting of moving/working area; - inadequate visibility from drivers/operators position; - inadequate seating; - travelling functions (drive, braking etc.); - rolling over; - equipment for loading fertilizer into the machine; - an auxiliary engine. It is not applicable to electromagnetic compatibility (EMC) nor to environmental hazards (except noise). These aspects are covered by EN 13739-1:2003, EN 13739-2:2003, EN 13740-1:2003 and EN 13740-2:2003.
This European Standard, applied together with EN 1553:1999, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled fertilizer distributors for solid fertilizer application, i.e. full width solid fertilizer distributors, solid fertilizer broadcasters, distributors with oscillating tube and line-distributors as well as solid fertilizer distributors driven by an auxiliary engine to be used by one operator only, used in agriculture, horticulture and in forestry. In addition, this European Standard specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. When requirements of this European Standard are different from those which are stated in EN 1553:1999 the requirements of this European Standard take precedence over the requirements of EN 1553:1999 for machines that have been designed and built according to the provisions of this European Standard. It does not apply to: - combined seed and fertilizer drills; - machines for distributing granulated pesticides; - pedestrian controlled distributors; - knapsack distributors. This European Standard deals with all the significant hazards, hazardous situations and events relevant to solid fertilizer distributors, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4), excepting the hazards arising from: - inadequate lighting of moving/working area; - inadequate visibility from drivers/operators position; - inadequate seating; - travelling functions (drive, braking etc.); - rolling over; - equipment for loading fertilizer into the machine; - an auxiliary engine. It is not applicable to electromagnetic compatibility (EMC) nor to environmental hazards (except noise). These aspects are covered by EN 13739-1:2003, EN 13739-2:2003, EN 13740-1:2003 and EN 13740-2:2003.
EN 14017:2005+A2:2009 is classified under the following ICS (International Classification for Standards) categories: 65.060.25 - Equipment for storage, preparation and distribution of fertilizers. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 14017:2005+A2:2009 has the following relationships with other standards: It is inter standard links to EN 14017:2005+A1:2008, EN ISO 4254-8:2018, EN ISO 11688-1:1998, EN ISO 12100-2:2003, EN 1553:1999, EN 13739-1:2003, EN ISO 12100-1:2003, EN 294:1992. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 14017:2005+A2:2009 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC, 98/37/EC; Standardization Mandates: M/079, M/396. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 14017:2005+A2:2009 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kmetijski in gozdarski stroji - Trosilniki mineralnih gnojil - VarnostLand- und Forstmaschinen - Mineraldüngerstreuer - SicherheitMatériel agricole et forestier - Distributeurs d'engrais solides - SécuritéAgricultural and forestry machinery - Solid fertilizer distributors - Safety65.060.25JQRMLYEquipment for storage, preparation and distribution of fertilizersICS:Ta slovenski standard je istoveten z:EN 14017:2005+A2:2009SIST EN 14017:2006+A2:2009en,fr,de01-november-2009SIST EN 14017:2006+A2:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14017:2005+A2
July 2009 ICS 65.060.25 Supersedes EN 14017:2005+A1:2008English Version
Agricultural and forestry machinery - Solid fertilizer distributors -Safety
Matériel agricole et forestier - Distributeurs d'engrais solides - Sécurité
Land- und Forstmaschinen - Mineraldüngerstreuer - Sicherheit This European Standard was approved by CEN on 29 August 2005 and includes Amendment 1 approved by CEN on 9 August 2008 and Amendment 2 approved by CEN on 23 May 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14017:2005+A2:2009: ESIST EN 14017:2006+A2:2009
Contents page Foreword . 3Introduction . 41Scope . 52Normative references . 63Terms and definitions . 64List of significant hazards . 75Safety requirements and/or protective measures . 85.1General . 85.2Stability when parked and for manual handling . 85.2.1General . 85.2.2Mounted machines fitted with rollers for manual handling when dismounted . 95.2.3Machines with adjustable supporting devices . 95.3Distributing components . 95.3.1Swivelling and movable components . 95.3.2Spreading plates and oscillating tubes . 95.4Feeding components guarding . 135.5Loading . 135.5.1Safe access for loading . 135.5.2Boarding means to loading location. 145.6Checking of the hopper contents . 155.7Protection against ejection of fertilizer . 165.8Removal of the spreading device. 165.9Flow rate calibration system . 165.10Hitching and clearance zone . 165.11Noise . 185.11.1Noise reduction as a safety requirement . 185.11.2Verification of requirements on noise based on noise emission values . 186Verification of the safety requirements and/or protective measures . 186.1Stability when parked and for manual handling . 186.1.1General . 186.1.2Mounted machines fitted with rollers for manual handling when dismounted . 186.2Swivelling and movable components . 187Information for use . 197.1Instruction handbook . 197.2Marking . 20Annex A (informative)
Stability of the tractor distributor combination . 21Annex B (informative)
Examples of pictograms . 22Annex ZA (informative)
####Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC$$$$ . 24Annex ZB (informative)
####Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC$$$$ . 25Bibliography . 26 SIST EN 14017:2006+A2:2009
!" and # $. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). # For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.$ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
1 Scope This European Standard, applied together with EN 1553:1999, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled fertilizer distributors for solid fertilizer application, i.e. full width solid fertilizer distributors, solid fertilizer broadcasters, distributors with oscillating tube and line-distributors as well as solid fertilizer distributors driven by an auxiliary engine to be used by one operator only, used in agriculture, horticulture and in forestry. In addition, this European Standard specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. When requirements of this European Standard are different from those which are stated in EN 1553:1999 the requirements of this European Standard take precedence over the requirements of EN 1553:1999 for machines that have been designed and built according to the provisions of this European Standard. It does not apply to: combined seed and fertilizer drills; machines for distributing granulated pesticides; pedestrian controlled distributors; knapsack distributors. This European Standard deals with all the significant hazards, hazardous situations and events relevant to solid fertilizer distributors, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4), excepting the hazards arising from: inadequate lighting of moving/working area; inadequate visibility from drivers/operators position; inadequate seating; travelling functions (drive, braking etc.); rolling over; equipment for loading fertilizer into the machine; an auxiliary engine. It is not applicable to electromagnetic compatibility (EMC) nor to environmental hazards (except noise). These aspects are covered by EN 13739-1:2003, EN 13739-2:2003, EN 13740-1:2003 and EN 13740-2:2003. This European Standard is not applicable to solid fertilizer distributors which are manufactured before the date of its publication as EN. SIST EN 14017:2006+A2:2009
4.3.3, 5.1 7.1 17 Falling or ejected objects or fluids Ejection of parts of distributing components, of spread fertilizer 4.1.8.2 5.3.2.2, 5.7, 7.1, 7.2 18 Loss of stability/overturning of machinery Lack of stability due to the unfolded swivelling and movable components, when parked or for manual handling 4.2.4.1, 4.3.2.1 5.2, 5.3.1.2, 7.1 19 Slip, trip and fall of persons (relating to machinery) Access for loading and checking of the hopper contents with inappropriate surface 4.1.5.1, 4.1.5.2, 4.1.5.3, 4.1.6, 4.2.5.2, 4.2.6.2, 4.3.4.2 5.5, 5.6, 7.1, 7.2 21.1 Fall of persons during access to (or at/from) the work position Access for loading and checking of the hopper contents with inappropriate surface 4.1.5.1, 4.1.6 5.5, 5.6 22.1 Inadequate location of manual controls Inappropriate adjusting location of the supporting devices, swivelling of the swivelling and movable components 4.3.1 5.2.3, 5.3.1.2 22.2 Inadequate design of manual controls and their mode of operation Inappropriate adjusting location of the supporting devices, contact with the swivelling and movable components, contact of the swivelling and movable components with high voltage power line 4.2.1, 4.3.1 5.2.3, 5.3.1.1, 5.3.1.2 24.2 Hazards from transmission of power between machines
Contact with the drive 4.1.7.1, 4.3.2.3 - 24.3 Hazards from coupling
Hitching and insufficient clearance zone 4.3.3, 5.1 5.10 5 Safety requirements and/or protective measures 5.1 General Machinery shall comply with the safety requirements and/or protective measures of this clause. In addition, the machine shall be designed according to the principles of EN ISO 12100 for relevant but not significant hazards, which are not dealt with by this European Standard. 5.2 Stability when parked and for manual handling 5.2.1 General The machine shall be designed to be stable as specified in 4.3.2.1.1 of EN 1553:1999. This shall be verified according to 6.1.1. See also 7.1 k) and 7.1 q). SIST EN 14017:2006+A2:2009
...