EN ISO 15912:2006/A1:2011

SLOVENSKI STANDARD
01-oktober-2011
Zobozdravstvo - Polnila in refrakcijski materiali - Dopolnilo 1: Zahteve in
preskusne metode za primernost ekspanzije materiala tipa 1 in tipa 2 - Dopolnilo
A1 (ISO 15912:2006/A1:2011)
Dentistry - Casting investments and refractory die materials - Amendment 1:
Requirement and test method for adequacy of expansion of Type 1 and Type 2 materials
(ISO 15912:2006/A1:2011)
Zahnheilkunde - Einbettmassen und hochtemperaturbeständige Stumpfmaterialien -
Änderung 1 (ISO 15912:2006/A1:2011)
Art dentaire - Revêtements et matériaux pour modèles réfractaires - Amendement 1:
Exigence et méthode d'essai pour l'adéquation d'expansion des matériaux de Type 1 et
de Type 2 (ISO 15912:2006/A1:2011)
Ta slovenski standard je istoveten z: EN ISO 15912:2006/A1:2011
ICS:
11.060.10 =RERWHKQLþQLPDWHULDOL Dental materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 15912:2006/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2011
ICS 11.060.10
English Version
Dentistry - Casting investments and refractory die materials -
Amendment 1: Requirement and test method for adequacy of
expansion of Type 1 and Type 2 materials (ISO
15912:2006/Amd 1:2011)
Art dentaire - Revêtements et matériaux pour modèles Zahnheilkunde - Einbettmassen und
réfractaires - Amendement 1: Exigence et méthode d'essai
hochtemperaturbeständige Stumpfmaterialien - Änderung 1
pour l'adéquation d'expansion des matériaux de Type 1 et (ISO 15912:2006/Amd 1:2011)
de Type 2 (ISO 15912:2006/Amd 1:2011)
This amendment A1 modifies the European Standard EN ISO 15912:2006; it was approved by CEN on 14 July 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15912:2006/A1:2011: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 15912:2006/A1:2011) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is held by
DIN.
This Amendment to the European Standard EN ISO 15912:2006 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by January 2012, and
conflicting national standards shall be withdrawn at the latest by January 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 15912:2006/Amd 1:2011 has been approved by CEN as a EN ISO 15912:2006/A1:2011
without any modification.
INTERNATIONAL ISO
STANDARD 15912
First edition
2006-10-01
AMENDMENT 1
2011-07-15
Dentistry — Casting investments and
refractory die materials
AMENDMENT 1: Requirement and test
method for adequacy of expansion of Type 1
and Type 2 materials
Art dentaire — Revêtements et matériaux pour modèles réfractaires
AMENDEMENT 1: Exigence et méthode d'essai pour l'adéquation
d'expansion des matériaux de Type 1 et de Type 2

Reference number
ISO 15912:2006/Amd.1:2011(E)
©
ISO 2011
ISO 15912:2006/Amd.1:2011(E)
©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved

ISO 15912:2006/Amd.1:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. I
...