EN 474-2:2006
(Main)Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers
General Information
- Abstract
This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to wheel and crawler tractor-dozers as defined in EN ISO 6165:2002, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This part also deals with rear-mounted winches for use on tractor-dozers.
The requirements of this part are complementary to the common requirements formulated in part 1.
This part does not repeat the requirements from part 1, but adds or replaces the requirements for application for tractor-dozers.
This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of tractor-dozers.
This European Standard is not applicable to tractor-dozers manufactured before the date of publication of this European Standard by CEN.
- Status
- Withdrawn
- Publication Date
- 28-Nov-2006
- Withdrawal Date
- 30-Sep-2008
- Technical Committee
- CEN/TC 151 - Construction equipment and building material machines - Safety
- Drafting Committee
- CEN/TC 151/WG 1 - Earth-moving machinery - Safety
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Oct-2008
- Completion Date
- 01-Oct-2008
- Directive
- Not Harmonized98/37/EC - MachineryOJ Ref: C, C 104 OJ Date: 08-May-2007
Relations
- Effective Date
- 22-Dec-2008
- Merged Into
EN 474-2:2006+A1:2008 - Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers - Effective Date
- 22-Dec-2008
- Official Journal Project Relation
EN 474-2:2006 - Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers - Effective Date
- 06-Apr-2009
Frequently Asked Questions
EN 474-2:2006 is a standard published by the European Committee for Standardization (CEN). Its full title is "Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers". This standard covers: This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to wheel and crawler tractor-dozers as defined in EN ISO 6165:2002, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This part also deals with rear-mounted winches for use on tractor-dozers. The requirements of this part are complementary to the common requirements formulated in part 1. This part does not repeat the requirements from part 1, but adds or replaces the requirements for application for tractor-dozers. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of tractor-dozers. This European Standard is not applicable to tractor-dozers manufactured before the date of publication of this European Standard by CEN.
This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to wheel and crawler tractor-dozers as defined in EN ISO 6165:2002, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This part also deals with rear-mounted winches for use on tractor-dozers. The requirements of this part are complementary to the common requirements formulated in part 1. This part does not repeat the requirements from part 1, but adds or replaces the requirements for application for tractor-dozers. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of tractor-dozers. This European Standard is not applicable to tractor-dozers manufactured before the date of publication of this European Standard by CEN.
EN 474-2:2006 is classified under the following ICS (International Classification for Standards) categories: 53.100 - Earth-moving machinery. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 474-2:2006 has the following relationships with other standards: It is inter standard links to EN 474-2:1996, EN 474-2:2006+A1:2008, EN 474-2:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 474-2:2006 is associated with the following European legislation: EU Directives/Regulations: 98/37/EC; Standardization Mandates: M/BC/CEN/91/1. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 474-2:2006 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozersStroji za zemeljska dela - Varnost - 2. del: Zahteve za buldožerjeEngins de terrassement - Sécurité - Partie 2: Prescriptions applicables aux bouteursErdbaumaschinen - Sicherheit - Teil 2: Anforderungen für PlaniermaschinenTa slovenski standard je istoveten z:EN 474-2:2006SIST EN 474-2:2007en53.100Stroji za zemeljska delaEarth-moving machineryICS:SIST EN 474-2:20001DGRPHãþDSLOVENSKI
STANDARDSIST EN 474-2:200701-maj-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 474-2November 2006ICS 53.100Supersedes EN 474-2:1996
English VersionEarth-moving machinery - Safety - Part 2: Requirements fortractor-dozersEngins de terrassement - Sécurité - Partie 2: Prescriptionsapplicables aux bouteursErdbaumaschinen - Sicherheit - Teil 2: Anforderungen fürPlaniermaschinenThis European Standard was approved by CEN on 17 April 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 474-2:2006: E
List of additional significant hazards – Tractor-dozers.8 Annex B (informative)
Illustrations.9 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC.11 Bibliography.12
Figures Figure B.1 — Crawler tractor-dozer.9 Figure B.2 — Wheel tractor-dozer.9 Figure B.3 — Crawler tractor-dozer with a plough.10
Tables Table A.1 — List of additional significant hazards.8
Foreword This document (EN 474-2:2006) has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines — Safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2007, and conflicting national standards shall be withdrawn at the latest by November 2008. This European Standard supersedes EN 474-2:1996. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. For bibliographic references see EN 474-1:2006. EN 474 "Earth-moving machinery — Safety" comprises the following parts: Part 1: General requirements Part 2: Requirements for tractor-dozers Part 3: Requirements for loaders Part 4: Requirements for backhoe-loaders Part 5: Requirements for hydraulic excavators Part 6: Requirements for dumpers Part 7: Requirements for scrapers Part 8: Requirements for graders Part 9: Requirements for pipelayers Part 10: Requirements for trenchers Part 11: Requirements for earth and landfill compactors Part 12: Requirements for cable excavators This European Standard is intended for use in combination with Part 1 of the series. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
...