EN 415-5:2006
(Main)Safety of packaging machines - Part 5: Wrapping machines
General Information
- Abstract
This European Standard applies to the following groups of machines:
¾ wrapping machines which partially wrap products (see Figures 1-4)
¾ wrapping machines which form a complete wrap without sealing (see Figures 5-7)
¾ wrapping machines which form a complete wrap with sealing (see Figures 8-14)
¾ shrinking equipment which is connected to wrapping machines covered by this standard (see Figures 15-16)
The individual machines are described in 3.2 of this standard.
This European Standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of wrapping machines.
The extent to which hazards, hazardous situations and events are covered are indicated in Clause 4 of this document.
Exclusions:
This standard is not applicable to larger examples of wrapping machines designed to handle products higher than 400 mm and wider than 400 mm. These machines are covered by EN 415-6.
This document is not applicable to wrapping machines which are manufactured before the date of publication of this document by CEN.
This standard does not consider the following hazards:
· Use of wrapping machines in potentially explosive atmospheres;
· Health, safety or hygiene hazards associated with the products that may be handled by the machines but does include general advice on this subject;
· Hazards that may be associated with electromagnetic emissions from wrapping machines;
· Hazards that may be associated with decommissioning wrapping machines.
- Status
- Withdrawn
- Publication Date
- 13-Jun-2006
- Withdrawal Date
- 03-Nov-2009
- Technical Committee
- CEN/TC 146 - Packaging machines - Safety
- Drafting Committee
- CEN/TC 146/WG 5 - Wrapping machines
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 04-Nov-2009
- Completion Date
- 04-Nov-2009
- Directive
- Not Harmonized98/37/EC - MachineryOJ Ref: C, C 104 OJ Date: 08-May-2007
Relations
- Effective Date
- 05-Sep-2009
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
BRCGS (Brand Reputation Compliance Global Standards)
Global food safety and quality standards owner.
Sponsored listings
Frequently Asked Questions
EN 415-5:2006 is a standard published by the European Committee for Standardization (CEN). Its full title is "Safety of packaging machines - Part 5: Wrapping machines". This standard covers: This European Standard applies to the following groups of machines: ¾ wrapping machines which partially wrap products (see Figures 1-4) ¾ wrapping machines which form a complete wrap without sealing (see Figures 5-7) ¾ wrapping machines which form a complete wrap with sealing (see Figures 8-14) ¾ shrinking equipment which is connected to wrapping machines covered by this standard (see Figures 15-16) The individual machines are described in 3.2 of this standard. This European Standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of wrapping machines. The extent to which hazards, hazardous situations and events are covered are indicated in Clause 4 of this document. Exclusions: This standard is not applicable to larger examples of wrapping machines designed to handle products higher than 400 mm and wider than 400 mm. These machines are covered by EN 415-6. This document is not applicable to wrapping machines which are manufactured before the date of publication of this document by CEN. This standard does not consider the following hazards: · Use of wrapping machines in potentially explosive atmospheres; · Health, safety or hygiene hazards associated with the products that may be handled by the machines but does include general advice on this subject; · Hazards that may be associated with electromagnetic emissions from wrapping machines; · Hazards that may be associated with decommissioning wrapping machines.
This European Standard applies to the following groups of machines: ¾ wrapping machines which partially wrap products (see Figures 1-4) ¾ wrapping machines which form a complete wrap without sealing (see Figures 5-7) ¾ wrapping machines which form a complete wrap with sealing (see Figures 8-14) ¾ shrinking equipment which is connected to wrapping machines covered by this standard (see Figures 15-16) The individual machines are described in 3.2 of this standard. This European Standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of wrapping machines. The extent to which hazards, hazardous situations and events are covered are indicated in Clause 4 of this document. Exclusions: This standard is not applicable to larger examples of wrapping machines designed to handle products higher than 400 mm and wider than 400 mm. These machines are covered by EN 415-6. This document is not applicable to wrapping machines which are manufactured before the date of publication of this document by CEN. This standard does not consider the following hazards: · Use of wrapping machines in potentially explosive atmospheres; · Health, safety or hygiene hazards associated with the products that may be handled by the machines but does include general advice on this subject; · Hazards that may be associated with electromagnetic emissions from wrapping machines; · Hazards that may be associated with decommissioning wrapping machines.
EN 415-5:2006 is classified under the following ICS (International Classification for Standards) categories: 55.200 - Packaging machinery. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 415-5:2006 has the following relationships with other standards: It is inter standard links to EN 415-5:2006+A1:2009, EN 415-1:2000+A1:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 415-5:2006 is associated with the following European legislation: EU Directives/Regulations: 98/37/EC; Standardization Mandates: M/079. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 415-5:2006 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety of packaging machines - Part 5: Wrapping machinesPakirne naprave – Varnost pakirnih naprav – 5. del: Zavijalni strojiSécurité des machines d'emballage - Partie 5 : Fardeleuses/enveloppeusesSicherheit von Verpackungsmaschinen - Teil 5: EinschlagmaschinenTa slovenski standard je istoveten z:EN 415-5:2006SIST EN 415-5:2006en55.200Pakirni strojiPackaging machineryICS:SLOVENSKI
STANDARDSIST EN 415-5:200601-oktober-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 415-5June 2006ICS 55.200 English VersionSafety of packaging machines - Part 5: Wrapping machinesSécurité des machines d'emballage - Partie 5 :Fardeleuses/enveloppeusesSicherheit von Verpackungsmaschinen - Teil 5:EinschlagmaschinenThis European Standard was approved by CEN on 23 March 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 415-5:2006: E
Noise test code for wrapping machines - grade of accuracy 2 and grade 3.84 A.1 Scope.84 A.2 Definitions.84 A.3 Determination of emission sound pressure level at the workstation.84 A.4 Sound power level determination.85 A.5 Installation and mounting conditions.85 A.6 Operating conditions.85 A.7 Measurement uncertainties.88 A.8 Information to be recorded.88 A.9 Information to be reported.89 A.10 Declaration and verification of noise emission values.89 Annex B (normative)
Methods of safeguarding small and medium sized apertures.91 B.1 Interlocked guard.91 B.2 Interlocked guard with ESPE trip device.93 B.3 ESPE trip device.94 B.4 Automatic guard.95 Annex C (normative)
ESPE Muting.96 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directives 98/37/EC.98 Bibliography.99
They contain several significant hazards and have the potential to cause serious injury. This document is a type C standard as defined in EN ISO 12100-1:2003. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this standard. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence.
1 Scope This European Standard applies to the following groups of machines: wrapping machines which partially wrap products (see Figures 1-4) wrapping machines which form a complete wrap without sealing (see Figures 5-7) wrapping machines which form a complete wrap with sealing (see Figures 8-14) shrinking equipment which is connected to wrapping machines covered by this standard (see Figures 15-16) The individual machines are described in 3.2 of this standard. This European Standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of wrapping machines. The extent to which hazards, hazardous situations and events are covered are indicated in Clause 4 of this document.
Exclusions: This standard is not applicable to larger examples of wrapping machines designed to handle products higher than 400 mm and wider than 400 mm. These machines are covered by EN 415-6. This document is not applicable to wrapping machines which are manufactured before the date of publication of this document by CEN. This standard does not consider the following hazards: • Use of wrapping machines in potentially explosive atmospheres; • Health, safety or hygiene hazards associated with the products that may be handled by the machines but does include general advice on this subject; • Hazards that may be associated with electromagnetic emissions from wrapping machines; • Hazards that may be associated with decommissioning wrapping machines. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 294:1992, Safety of machinery - Safety distance to prevent danger zones being reached by the upper limbs EN 415-1:2000, Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment EN 418, Safety of machinery - Emergency stop equipment, functional aspects - Principles for design EN 563, Safety of machinery - Temperatures of touchable surfaces - Ergonomics data to establish temperature limit values for hot surfaces
...