EN ISO 10513:2012

SLOVENSKI STANDARD
01-maj-2013
1DGRPHãþD
SIST EN ISO 10513:2001
9LVRNHãHVWUREH]DãþLWQHPDWLFH]GHIRUPDFLMR]GUREQLPPHWUVNLPQDYRMHP
5D]UHGLWUGQRVWLLQ,62
Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property
classes 8, 10 and 12 (ISO 10513:2012)
Hohe Sechskantmuttern mit Klemmteil (Ganzmetallmuttern) mit metrischem Feingewinde
- Festigkeitsklassen 8, 10 und 12 (ISO 10513:2012)
Écrous hexagonaux hauts autofreinés tout métal à filetage métrique à pas fin - Classes
de qualité 8, 10 et 12 (ISO 10513:2012)
Ta slovenski standard je istoveten z: EN ISO 10513:2012
ICS:
21.040.10 Metrski navoji Metric screw threads
21.060.20 Matice Nuts
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 10513
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2012
ICS 21.060.20 Supersedes EN ISO 10513:1997
English Version
Prevailing torque type all-metal hexagon high nuts with metric
fine pitch thread - Property classes 8, 10 and 12 (ISO
10513:2012)
Écrous hexagonaux hauts autofreinés tout métal à filetage Sechskantmuttern mit Klemmteil (Ganzmetallmuttern), Typ
métrique à pas fin - Classes de qualité 8, 10 et 12 (ISO 2, mit metrischem Feingewinde - Festigkeitsklassen 8, 10
10513:2012) und 12 (ISO 10513:2012)
This European Standard was approved by CEN on 13 November 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10513:2012: E
worldwide for CEN national Members.

Contents Page
Foreword . 3

Foreword
This document (EN ISO 10513:2012) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10513:1997.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10513:2012 has been approved by CEN as a EN ISO 10513:2012 without any modification.

INTERNATIONAL ISO
STANDARD 10513
Second edition
2012-12-15
Prevailing torque type all-metal hexagon
high nuts with metric fine pitch thread —
Property classes 8, 10 and 12
Écrous hexagonaux hauts autofreinés tout métal à filetage métrique à
pas fin — Classes de qualité 8, 10 et 12
Reference number
ISO 10513:2012(E)
©
ISO 2012
ISO 10513:2012(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

ISO 10513:2012(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Dimensions . 2
4 Requirements and reference International Standards . 3
5 Designation .
...