EN ISO 20344:2004/A1:2007

SLOVENSKI STANDARD
01-december-2007
Osebna varovalna oprema - Metode preskušanja obutve - Dopolnilo 1 (ISO
20344:2004/Amd 1:2007)
Personal protective equipment - Test methods for footwear - Amendment 1 (ISO
20344:2004/Amd 1:2007)
Persönliche Schutzausrüstung - Prüfverfahren für Schuhe, Änderung 1 (ISO
20344:2004/Amd 1:2007)
Équipement de protection individuelle - Méthodes d'essais pour les chaussures -
Amendement 1 (ISO 20344:2004/Amd 1:2007)
Ta slovenski standard je istoveten z: EN ISO 20344:2004/A1:2007
ICS:
13.340.50 =DãþLWQDREXWHY Protective footwear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 20344:2004/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2007
ICS 13.340.50
English Version
Personal protective equipment - Test methods for footwear -
Amendment 1 (ISO 20344:2004/Amd 1:2007)
Équipement de protection individuelle - Méthodes d'essais Persönliche Schutzausrüstung - Prüfverfahren für Schuhe -
pour les chaussures - Amendement 1 (ISO Änderung 1 (ISO 20344:2004/Amd 1:2007)
20344:2004/Amd 1:2007)
This amendment A1 modifies the European Standard EN ISO 20344:2004; it was approved by CEN on 27 August 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20344:2004/A1:2007: E
worldwide for CEN national Members.

Contents Page
Foreword.3

Foreword
This document (EN ISO 20344:2004/A1:2007) has been prepared by Technical Committee CEN/TC 161 "Foot
and leg protectors", the secretariat of which is held by BSI, in collaboration with Technical Committee ISO/TC
94 "Personal safety - Protective clothing and equipment".
This Amendment to the European Standard EN ISO 20344:2004 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by March 2008, and
conflicting national standards shall be withdrawn at the latest by March 2008.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
For relationship with EC Directive(s), see informative Annex ZA which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

ANNEX ZA
(informative)
Relationship between this Amendment and the Essential Requirements
of EU Directive 89/686
This Amendment pertains to ISO 20344:2004, which was prepared under a mandate given to CEN by the
European Commission to provide one means of conforming to Essential Requirements of the New Approach
Directive 89/686.
INTERNATIONAL ISO
STANDARD 20344
First edition
2004-08-01
AMENDMENT 1
2007-09-01
Personal protective equipment — Test
methods for footwear
AMENDMENT 1
Équipement de protection individuelle — Méthodes d'essais pour les
chaussures
AMENDEMENT 1
Reference number
ISO 20344:2004/Amd.1:2007(E)
©
ISO 2007
ISO 20344:2004/Amd.1:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved

ISO 20344:2004/Amd.1:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 20344:2004 was prepared by the European Committee for Standardization (CEN)
Technical Committee CEN/TC 161, Foot and leg protectors, in collaboration with Technical Committee
ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 3, Foot protection, in
accordan
...