EN 13752:2009
(Main)Products used for treatment of water intended for human consumption - Manganese dioxide
General Information
- Abstract
This European Standard is applicable to manganese dioxide used for treatment of water intended for human consumption. It describes the characteristics of manganese dioxide and specifies the requirements and the corresponding test methods for manganese dioxide. It gives information on its use in water treatment.
This standard is not applicable to manganese dioxide with purity ranging from 85% to 90% and bulk density loose greater than 1850 kg/m3.
- Status
- Withdrawn
- Publication Date
- 10-Mar-2009
- Withdrawal Date
- 14-Aug-2012
- Technical Committee
- CEN/TC 164 - Water supply
- Drafting Committee
- CEN/TC 164/WG 9 - Drinking water treatment
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 15-Aug-2012
- Completion Date
- 15-Aug-2012
Relations
- Effective Date
- 08-Jun-2022
- Effective Date
- 22-Aug-2012
Get Certified
Connect with accredited certification bodies for this standard
ECOCERT
Organic and sustainability certification.
Eurofins Food Testing Global
Global leader in food, environment, and pharmaceutical product testing.
Intertek Bangladesh
Intertek certification and testing services in Bangladesh.
Sponsored listings
Frequently Asked Questions
EN 13752:2009 is a standard published by the European Committee for Standardization (CEN). Its full title is "Products used for treatment of water intended for human consumption - Manganese dioxide". This standard covers: This European Standard is applicable to manganese dioxide used for treatment of water intended for human consumption. It describes the characteristics of manganese dioxide and specifies the requirements and the corresponding test methods for manganese dioxide. It gives information on its use in water treatment. This standard is not applicable to manganese dioxide with purity ranging from 85% to 90% and bulk density loose greater than 1850 kg/m3.
This European Standard is applicable to manganese dioxide used for treatment of water intended for human consumption. It describes the characteristics of manganese dioxide and specifies the requirements and the corresponding test methods for manganese dioxide. It gives information on its use in water treatment. This standard is not applicable to manganese dioxide with purity ranging from 85% to 90% and bulk density loose greater than 1850 kg/m3.
EN 13752:2009 is classified under the following ICS (International Classification for Standards) categories: 71.100.80 - Chemicals for purification of water. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13752:2009 has the following relationships with other standards: It is inter standard links to EN 13752:2003, EN 13752:2012. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13752:2009 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Izdelki, ki se uporabljajo za pripravo pitne vode - Manganov dioksidProdukte zur Aufbereitung von Wasser für den menschlichen Gebrauch - MangandioxidProduits utilisés pour le traitement de l'eau destinée à la consommation humaine - Dioxyde de manganèseProducts used for treatment of water intended for human consumption - Manganese dioxide71.100.80Chemicals for purification of water13.060.20Pitna vodaDrinking waterICS:Ta slovenski standard je istoveten z:EN 13752:2009SIST EN 13752:2009en,fr,de01-maj-2009SIST EN 13752:2009SLOVENSKI
STANDARDSIST EN 13752:20031DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13752March 2009ICS 71.100.80Supersedes EN 13752:2003
English VersionProducts used for treatment of water intended for humanconsumption - Manganese dioxideProduits utilisés pour le traitement de l'eau destinée à laconsommation humaine - Dioxyde de manganèseProdukte zur Aufbereitung von Wasser für denmenschlichen Gebrauch - MangandioxidThis European Standard was approved by CEN on 1 February 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13752:2009: ESIST EN 13752:2009
............................................................................... 9 9.3 Transportation regulations and labelling .................................................................................................. 10 9.4 Marking ......................................................................................................................................................... 10 9.5 Storage .......................................................................................................................................................... 10 Annex A (informative)
General information on manganese dioxide . 11 Annex B (normative)
General rules relating for safety . 14 Bibliography . 15
The product shall be generally homogeneous and shall be visibly free of extraneous matter. 5.2 Particle size distribution The particle size distribution shall be described by either: a)
effective size:
(d10) with a maximum deviation of ± 5 %; uniformity coefficient:
(U) less than 1,5; minimum size:
(d1) with a limit deviation of ± 5 %; NOTE 1 The particle size can decrease during transportation and handling. b) or, particle size range and mass fraction of oversize and undersize particles according to application. The maximum contents of oversize and undersize shall be a mass fraction of 5 % for application of the product in multimedia filters and a mass fraction of 10 % for use in single media filters. See A.2.3 for examples of available particle sizes that are used. NOTE 2 Other values can be necessary for certain applications. 5.3 Density 5.3.1 Bulk density loose The bulk density loose shall be in the range of 1 750 kg/m3 to 1 850 kg/m3.
1) Chemical Abstracts Service Registry Number. 2) European Inventory of Existing Commercial Chemical Substances. SIST EN 13752:2009
...