EN 13035-7:2006

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glassStroji in obrati za proizvodnjo, obdelavo in predelavo ravnega stekla - Varnostne zahteve - 7. del: Stroji za rezanje lepljenega steklaMachines et installations pour la production, le façonnage et la transformation du verre plat - Exigences de sécurité - Partie 7 : Machines a couper le verre feuilletéMaschinen und Anlagen zur Herstellung, Be- und Verarbeitung von Flachglas - Sicherheitsanforderungen - Teil 7: Schneidmaschinen für VerbundglasTa slovenski standard je istoveten z:EN 13035-7:2006SIST EN 13035-7:2007en81.100Equipment for the glass and ceramics industriesICS:SLOVENSKI
STANDARDSIST EN 13035-7:200701-januar-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13035-7June 2006ICS 81.100 English VersionMachines and plants for the manufacture, treatment andprocessing of flat glass - Safety requirements - Part 7: Cuttingmachines for laminated glassMachines et installations pour la production, le façonnageet la transformation du verre plat - Exigences de sécurité -Partie 7 : Machines à couper le verre feuilletéMaschinen und Anlagen zur Herstellung, Be- undVerarbeitung von Flachglas - Sicherheitsanforderungen -Teil 7: Schneidmaschinen für VerbundglasThis European Standard was approved by CEN on 24 May 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13035-7:2006: E

Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC.12 Bibliography.13
Tables Table 1 — List of significant hazards.8 Table 2 — Individual testing for requirements listed in Clause 5.10

1 Scope 1.1 This European Standard applies for cutting machines for laminated glass including the following steps: transport and positioning, synchronous cutting (scoring) from both sides, break-out, electrical heating and separation. 1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to cutting machines for laminated glass when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). Those hazards, which are dealt with in the ad-hoc standard EN 619 for con-veyors are excepted. This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, the operation and mainte-nance. Hazards from noise are not considered to be significant. 1.3 This European Standard is not applicable to cutting (scoring) and break-out of monolithic glass (see EN 13035-3 and EN 13035-6). 1.4 This European Standard is not applicable to the cutting of laminated glass by sawing or by the use of high-pressure liquid. 1.5 This European Standard is not applicable to the significant hazards of conveyors and machines for the manufacture, treatment and processing of flat glass such as tilting tables. 1.6 This European Standard is not applicable to cutting machines for laminated glass which are manufac-tured before the date of publication of this European Standard by CEN. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 349:1993, Safety of machinery — Minimum gaps to avoid crushing of parts of the human body EN 418:1992, Safety of machinery — Emergency stop equipment, functional aspects — Principles of design EN 563:1994, Safety of machinery — Temperatures of touchable surfaces — Ergonomics data to establish temperature limit values for hot surfaces EN 953:1997, Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards EN 954-1:1996, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design EN 983:1996, Safety of machinery — Safety requirements for fluid power systems and their components — Pneumatics EN 1037:1995, Safety of machinery — Prevention of unexpected start-up EN 1050:1996, Safety of machinery — Principles for risk assessment EN 1760-2:2001, Safety of machinery — Pressure sensitive protective devices — Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars

requirements and tests (IEC 61496-1:2004, modified) prEN 61496-2:2005, Safety of machinery — Electro-sensitive protective equipment — Part 2: Particular
requirements for equipment using active opto-electronic protective devices (AOPDs) (IEC 61496-2:2005) EN ISO 12100-1:2003, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery — Basic concepts, general principles for design — Part 2: Tech-nical principles (ISO 12100-2:2003) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 12100-1:2003 and the following apply: 3.1 laminated (glass) (flat) glass composed of layers of flat glass joined together by plastic layers 3.2 break-out method to open a cut (score) by generating strain, e.g. by mechanical devices 3.3 carriage mounting assembly for moving the cutting heads with the cutting tools in the axis of the (fixed) cutting bridge 3.4 cutting bridge fixed horizontal guide for the carriage 3.5 separation operation of drawing apart two sheets of laminated glass after scoring, break-out and heating 3.6 clamp (bar) device to hold down the glass from above against a supporting surface, e.g. table 3.7 gripping device equipment to grasp the glass at an edge usually for separation by drawing apart 3.8 stops mechanical devices to limit movements, e.g. of carriages in case of a failure of the operational stop

( ) = Ref. No. from Table
...