EN 13445-3:2002
(Main)Unfired pressure vessels - Part 3: Design
General Information
- Abstract
This part of this European Standard specifies requirements for the design of unfired pressure vessels covered by EN 13445-1 and constructed of steels in accordance with EN 13445-2.
Annex C of EN 13445-5 specifies requirements for the design of access and inspection openings, closing mechanisms and special locking elements.
- Status
- Withdrawn
- Publication Date
- 28-May-2002
- Withdrawal Date
- 28-Jul-2009
- Technical Committee
- CEN/TC 54 - Unfired pressure vessels
- Drafting Committee
- CEN/TC 54/WG 53 - C - Design methods
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 29-Jul-2009
- Completion Date
- 29-Jul-2009
- Directive
- Not Harmonized97/23/EC - Pressure equipmentOJ Ref: C, C 171 OJ Date: 17-Jul-2002
Relations
- Effective Date
- 25-Jul-2009
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Referred By
EN 13831:2007 - Closed expansion vessels with built in diaphragm for installation in water - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 13445-3:2002 is a standard published by the European Committee for Standardization (CEN). Its full title is "Unfired pressure vessels - Part 3: Design". This standard covers: This part of this European Standard specifies requirements for the design of unfired pressure vessels covered by EN 13445-1 and constructed of steels in accordance with EN 13445-2. Annex C of EN 13445-5 specifies requirements for the design of access and inspection openings, closing mechanisms and special locking elements.
This part of this European Standard specifies requirements for the design of unfired pressure vessels covered by EN 13445-1 and constructed of steels in accordance with EN 13445-2. Annex C of EN 13445-5 specifies requirements for the design of access and inspection openings, closing mechanisms and special locking elements.
EN 13445-3:2002 is classified under the following ICS (International Classification for Standards) categories: 23.020.30 - Pressure vessels, gas cylinders. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13445-3:2002 has the following relationships with other standards: It is inter standard links to EN 13445-3:2009, EN 14025:2008, EN 14359:2006+A1:2010, EN 13831:2007, EN 13530-2:2002, EN 378-2:2008+A2:2012, EN 13445-3:2002/A4:2005, EN 13445-3:2002/A16:2008, EN 13445-3:2002/A1:2007, EN 13445-3:2002/A5:2006, EN 13445-3:2002/A10:2008, EN 13445-3:2002/A11:2006, EN 13445-3:2002/A6:2006, EN 13445-3:2002/A2:2007, EN 13445-3:2002/A17:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13445-3:2002 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13445-3:2002 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2002
1HRJUHYDQHWODþQHSRVRGHGHO .RQVWUXLUDQMH
Unfired pressure vessels - Part 3: Design
Unbefeuerte Druckbehälter - Teil 3: Konstruktion
Récipients sous pression non soumis a la flamme - Partie 3: Conce
...