EN 3014:2001

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification: 1100 Mpa (at ambient temperature)/650 oCLuft- und Raumfahrt - Einnietmuttern, selbstsichernd, verzahnt, aus hochwarmfestem Stahl FE-PA2601 (A286) - Klasse: 1 100 MPa (bei Raumtemperatur) / 650 °CSérie aérospatiale - Écrous a sertir, dentelés, a freinage interne, en acier résistant a chaud PA2601 (A286) - Classification : 1 100 MPa (a température ambiante) / 650 °CAerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification: 1100 MPa (at ambient temperature)/650°C49.030.30MaticeNutsICS:Ta slovenski standard je istoveten z:EN 3014:2001SIST EN 3014:2002en01-januar-2002SIST EN 3014:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3014June 2001ICS 49.030.30English versionAerospace series - Shank nuts, self-locking, serrated, in heatresisting steel FE-PA2601 (A286) - Classification: 1100 MPa (atambient temperature)/650°CSérie aérospatiale - Ecrous à sertir, dentelés, à freinageinterne, en acier résistant à chaud FE-PA2601 (A286) -Classification: 1100 MPa (à température ambiante)/650°CLuft- und Raumfahrt - Einnietmuttern, selbstsichernd,verzahnt, aus hochwarmfestem Stahl FE-PA2601 (A286) -Klasse: 1100 MPa (bei Raumtemperatur)/650°CThis European Standard was approved by CEN on 28 February 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3014:2001 ESIST EN 3014:2002

Page 2EN 3014:2001ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers(AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by December 2001, and conflicting national standards shall bewithdrawn at the latest by December 2001.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,Spain, Sweden, Switzerland and the United Kingdom.SIST EN 3014:2002

Page 3EN 3014:20011 ScopeThis standard specifies t
...