EN 10028-6:2009
(Main)Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
General Information
- Abstract
This European Standard specifies the requirements for flat products for pressure equipments made of quenched
and tempered steels as specified in Table 1.
The requirements in EN 10028-1 also apply.
NOTE Once this European Standard is published in the EU Official Journal (OJEU) under Directive 97/23/EC, presumption of
conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this
European Standard (Part 1 and this Part 6 of the series) and does not presume adequacy of the material to a specific item of
equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements
of this specific item of equipment to verify that the ESRs of Directive 97/23/EC are satisfied, needs to be done.
- Status
- Withdrawn
- Publication Date
- 16-Jun-2009
- Withdrawal Date
- 22-Sep-2026
- Technical Committee
- ECISS/TC 107 - Steels for pressure purposes
- Drafting Committee
- ECISS/TC 22 - Steels for pressure purposes - Qualities
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 26-Jul-2017
- Completion Date
- 23-Sep-2026
- Directive
- Harmonized Standard2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipmentOJ Ref: C 293/01 OJ Date: 12-Aug-2016
Not Harmonized97/23/EC - Pressure equipmentOJ Ref: C, C 226 OJ Date: 19-Sep-2009
Relations
- Effective Date
- 20-Jun-2009
- Effective Date
- 08-Jun-2022
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10028-6:2009 is a standard published by the European Committee for Standardization (CEN). Its full title is "Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered". This standard covers: This European Standard specifies the requirements for flat products for pressure equipments made of quenched and tempered steels as specified in Table 1. The requirements in EN 10028-1 also apply. NOTE Once this European Standard is published in the EU Official Journal (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this European Standard (Part 1 and this Part 6 of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 97/23/EC are satisfied, needs to be done.
This European Standard specifies the requirements for flat products for pressure equipments made of quenched and tempered steels as specified in Table 1. The requirements in EN 10028-1 also apply. NOTE Once this European Standard is published in the EU Official Journal (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this European Standard (Part 1 and this Part 6 of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 97/23/EC are satisfied, needs to be done.
EN 10028-6:2009 is classified under the following ICS (International Classification for Standards) categories: 77.140.30 - Steels for pressure purposes; 77.140.50 - Flat steel products and semi-products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10028-6:2009 has the following relationships with other standards: It is inter standard links to EN 10028-6:2003, EN 10028-6:2017, EN 10028-1:2007+A1:2009, EN 10204:2004, EN 13445-2:2014, EN 13480-2:2017, EN 12480:2015, EN 13480-2:2012, EN 13611:2015, EN 12480:2018. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10028-6:2009 is associated with the following European legislation: EU Directives/Regulations: 2014/68/EU, 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10028-6:2009 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SREROMãDQDFlacherzeugnisse aus Druckbehälterstählen - Teil 6: Schweißgeeignete Feinkornbaustähle, vergütetProduits plats en acier pour appareils à pression - Partie 6: Aciers soudables à grains fins, trempés et revenusFlat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered77.140.50SROL]GHONLFlat steel products and semi-products77.140.30Jekla za uporabo pod tlakomSteels for pressure purposesICS:Ta slovenski standard je istoveten z:EN 10028-6:2009SIST EN 10028-6:2009en,fr,de01-september-2009SIST EN 10028-6:2009SLOVENSKI
STANDARDSIST EN 10028-6:20031DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10028-6June 2009ICS 77.140.30; 77.140.50Supersedes EN 10028-6:2003
English VersionFlat products made of steels for pressure purposes - Part 6:Weldable fine grain steels, quenched and temperedProduits plats en acier pour appareils à pression - Partie 6:Aciers soudables à grains fins, trempés et revenusFlacherzeugnisse aus Druckbehälterstählen - Teil 6:Schweißgeeignete Feinkornbaustähle, vergütetThis European Standard was approved by CEN on 14 May 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10028-6:2009: ESIST EN 10028-6:2009
page Foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Dimensions and tolerances . 4 5 Calculation of mass . 4 6 Classification and designation . 4 6.1 Classification . 4 6.2 Designation . 4 7 Information to be supplied by the purchaser . 5 7.1 Mandatory information . 5 7.2 Options . 5 7.3 Example for ordering . 5 8 Requirements . 5 8.1 Steelmaking process . 5 8.2 Delivery condition . 5 8.3 Chemical composition . 6 8.4 Mechanical properties . 6 8.5 Surface condition. 6 8.6 Internal soundness . 6 9 Inspection . 6 9.1 Types of inspections and inspections documents . 6 9.2 Tests to be carried out . 6 9.3 Retests . 6 10 Sampling . 6 11 Test methods . 7 12 Marking . 7 Annex ZA (informative)
Relationship between this
European
Standard and the Essential Requirements of EU Directive 97/23/EC . 12 Bibliography . 13
b) series with elevated temperature properties (P.QH); c) series with low temperature properties down to -40 °C (P.QL1); d) series with low temperature properties down to -60 °C
...