EN 12517-2:2008
(Main)Non-destructive testing of welds - Part 2: Evaluation of welded joints in aluminium and its alloys by radiography - Acceptance levels
General Information
- Abstract
This European Standard specifies acceptance levels for indications from imperfections in aluminium butt welds detected by radiographic testing. If agreed, the acceptance levels may be applied to other types of welds or materials.
The acceptance levels may be related to welding standards, application standards, specifications or codes.
This European Standard assumes that the radiographic testing has been carried out in accordance with EN 1435.
When assessing whether a weld meets the requirements specified for a weld quality level, the sizes of imperfections permitted by standards are compared with the dimensions of indications revealed by a radiograph made of the weld.
- Status
- Withdrawn
- Publication Date
- 19-Aug-2008
- Withdrawal Date
- 13-Aug-2013
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121/SC 5 - Testing of welds (destructive and non-destructive)
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 14-Aug-2013
- Completion Date
- 14-Aug-2013
- Directive
- Not Harmonized97/23/EC - Pressure equipment
Relations
- Effective Date
- 08-Mar-2023
- Effective Date
- 21-Aug-2013
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
DVS-ZERT GmbH
German welding certification society.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
EWF/IIW (European/International Welding Federation)
International welding personnel certification.
Sponsored listings
Frequently Asked Questions
EN 12517-2:2008 is a standard published by the European Committee for Standardization (CEN). Its full title is "Non-destructive testing of welds - Part 2: Evaluation of welded joints in aluminium and its alloys by radiography - Acceptance levels". This standard covers: This European Standard specifies acceptance levels for indications from imperfections in aluminium butt welds detected by radiographic testing. If agreed, the acceptance levels may be applied to other types of welds or materials. The acceptance levels may be related to welding standards, application standards, specifications or codes. This European Standard assumes that the radiographic testing has been carried out in accordance with EN 1435. When assessing whether a weld meets the requirements specified for a weld quality level, the sizes of imperfections permitted by standards are compared with the dimensions of indications revealed by a radiograph made of the weld.
This European Standard specifies acceptance levels for indications from imperfections in aluminium butt welds detected by radiographic testing. If agreed, the acceptance levels may be applied to other types of welds or materials. The acceptance levels may be related to welding standards, application standards, specifications or codes. This European Standard assumes that the radiographic testing has been carried out in accordance with EN 1435. When assessing whether a weld meets the requirements specified for a weld quality level, the sizes of imperfections permitted by standards are compared with the dimensions of indications revealed by a radiograph made of the weld.
EN 12517-2:2008 is classified under the following ICS (International Classification for Standards) categories: 25.160.40 - Welded joints and welds. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12517-2:2008 has the following relationships with other standards: It is inter standard links to prEN 12517, EN ISO 10675-2:2013, EN ISO 17636-2:2022, EN ISO 17636-1:2022, EN ISO 10042:2018, EN ISO 6520-1:2007, EN 14276-1:2006+A1:2011, EN 14276-2:2007+A1:2011, EN 378-2:2008+A2:2012; is excused to prEN 12517. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12517-2:2008 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12517-2:2008 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Neporušitvene preiskave zvarnih spojev - 2. del: Ocenjevanje zvarnih spojev na aluminiju in njegovih zlitinah pri radiografiji - Stopnje sprejemljivostiZerstörungsfreie Prüfung von Schweißverbindungen - Teil 2: Bewertung von Schweißverbindungen in Aluminium und seinen Legierungen mit Durchstrahlung - ZulässigkeitsgrenzenEssais non destructifs des assemblages soudés - Partie 2 : Evaluation par radiographie des assemblages soudés en alluminium et ses alliages - Niveaux d'acceptationNon destructive testing of welds - Part 2: Evaluation of welded joints in aluminium and its alloys by radiography - Acceptance levels77.120.10Aluminij in aluminijeve zlitineAluminium and aluminium alloys25.160.40Varjeni spoji in variWelded jointsICS:Ta slovenski standard je istoveten z:EN 12517-2:2008SIST EN 12517-2:2008en,fr,de01-november-2008SIST EN 12517-2:2008SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12517-2August 2008ICS 25.160.40 English VersionNon-destructive testing of welds - Part 2: Evaluation of weldedjoints in aluminium and its alloys by radiography - AcceptancelevelsEssais non destructifs des assemblages soudés - Partie 2:Évaluation par radiographie des assemblages soudés enaluminium et ses alliages - Niveaux d'acceptationZerstörungsfreie Prüfung von Schweißverbindungen - Teil2: Bewertung von Schweißverbindungen in Aluminium undseinen Legierungen mit Durchstrahlung -ZulässigkeitsgrenzenThis European Standard was approved by CEN on 18 July 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12517-2:2008: ESIST EN 12517-2:2008
Guide to the limitations of radiographic testing).8 A.1 Volumetric imperfections in butt welds.8 A.2 Cracks in butt welds.8 A.3 Planar imperfections in butt welds.8 Annex B (informative)
Examples for determination of percentage (%) of imperfections.9 Annex C (informative)
Sum of acceptable areas.11 Bibliography.13
...