EN 13054:2001
(Main)Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package
General Information
- Abstract
This standard specifies two methods of determining the location of the centre of gravity of flat sided rigid packages or unit loads. In the following text, a package or a unit load is called "a test item".
- Status
- Published
- Publication Date
- 20-Feb-2001
- Technical Committee
- CEN/TC 261 - Packaging
- Drafting Committee
- CEN/TC 261/SC 5 - Primary packaging and transport packaging
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 11-Sep-2024
- Completion Date
- 23-Sep-2026
Overview
EN 13054:2001 (CEN) defines test methods for the determination of the centre of gravity of complete, filled transport packages. The standard applies to flat-sided rigid packages or assembled unit loads - in the document these are referred to as a "test item." It specifies two distinct methods for locating the centre of gravity so that manufacturers, logistics teams and testing laboratories can assess package balance and behavior during handling and transport.
Understanding a package's centre of gravity is essential for safe handling, correct lifting, stable stacking and reliable load planning. EN 13054:2001 provides a harmonized approach for organizations to produce repeatable, comparable results.
Key Topics
- Scope and applicability: Flat-sided rigid packages and unit loads (test items).
- Two specified methods: The standard lists two approved procedures to determine the centre of gravity. (The standard text describes which method is appropriate depending on package geometry and testing context.)
- Measurement intent: Locate the centre of gravity relative to package geometry to support safe operations.
- Terminology: Defines terms such as "test item" to ensure consistent interpretation across users.
EN 13054 emphasizes practical measurement outcomes rather than prescribing a single universal technique, allowing selection of the most suitable method for the test item and facility capabilities.
Applications
The standard is used by a wide range of stakeholders involved in packaging, transport and logistics:
- Packaging designers: Validate designs for balance and handling before production.
- Manufacturers: Check filled package stability and identify potential handling hazards.
- Logistics and warehouse teams: Plan lifting points, forklift handling and stacking patterns based on measured centres of gravity.
- Testing laboratories: Provide certified measurements to support compliance, customer requirements and risk assessments.
- Quality assurance: Integrate centre-of-gravity data into acceptance criteria for unit loads.
Benefits include improved handling safety, reduced risk of load shifts, more accurate load distribution planning and better compatibility with automated handling systems.
Related Standards
- Other CEN packaging and transport standards covering load securing, packaging performance and testing methods.
- International packaging and handling guidance used alongside EN 13054 where global workflows exist.
For organisations assessing package stability and handling risks, EN 13054:2001 is a focused, practical reference to establish consistent measurement of the centre of gravity for flat-sided rigid transport packages and unit loads. Use it with your internal procedures and complementary standards for load securing and transport safety to form a complete compliance and safety program.
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
BRCGS (Brand Reputation Compliance Global Standards)
Global food safety and quality standards owner.
Sponsored listings
Frequently Asked Questions
EN 13054:2001 is a standard published by the European Committee for Standardization (CEN). Its full title is "Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package". This standard covers: This standard specifies two methods of determining the location of the centre of gravity of flat sided rigid packages or unit loads. In the following text, a package or a unit load is called "a test item".
This standard specifies two methods of determining the location of the centre of gravity of flat sided rigid packages or unit loads. In the following text, a package or a unit load is called "a test item".
EN 13054:2001 is classified under the following ICS (International Classification for Standards) categories: 55.180.99 - Other standards related to freight distribution of goods. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13054:2001 has the following relationships with other standards: It is inter standard links to EN ISO/IEC 17025:2017, EN 22206:1992, EN ISO 13705:2006, EN ISO 10438-1:2007, EN 1473:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13054:2001 is associated with the following European legislation: EU Directives/Regulations: 80/232/EEC, 87/356/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13054:2001 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verpackung - Versandfertige Packstücke - Prüfung zur Bestimmung des Schwerpunktes eines PackstückesEmballages - Emballages d'expédition complets et pleins - Méthodes d'essai pour la détermination du centre de gravité d'un emballagePackaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a pa
...