EN ISO 1628-1:2009/A1:2012

SLOVENSKI STANDARD
01-september-2012
3ROLPHUQLPDWHULDOL'RORþDQMHYLVNR]QRVWLSROLPHURYYUD]UHGþHQLKUD]WRSLQDKV
NDSLODUQLPLYLVNR]LPHWULGHO6SORãQDQDþHOD'RSROQLOR,62
$PG
Plastics - Determination of the viscosity of polymers in dilute solution using capillary
viscometers - Part 1: General principles - Amendment 1 (ISO 1628-1:2009/Amd 1:2012)
Kunststoffe - Bestimmung der Viskosität von Polymeren in verdünnter Lösung durch ein
Kapillarviskosimeter - Teil 1: Allgemeine Grundlagen - Änderung 1 (ISO 1628-
1:2009/Amd 1:2012)
Plastiques - Détermination de la viscosité des polymères en solution diluée à l'aide de
viscosimètres à capillaires - Partie 1: Principes généraux - Amendement 1 (ISO 1628-
1:2009/Amd 1:2012)
Ta slovenski standard je istoveten z: EN ISO 1628-1:2009/A1:2012
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 1628-1:2009/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2012
ICS 83.080.01
English Version
Plastics - Determination of the viscosity of polymers in dilute
solution using capillary viscometers - Part 1: General principles -
Amendment 1 (ISO 1628-1:2009/Amd 1:2012)
Plastiques - Détermination de la viscosité des polymères Kunststoffe - Bestimmung der Viskosität von Polymeren in
en solution diluée à l'aide de viscosimètres à capillaires - verdünnter Lösung durch ein Kapillarviskosimeter - Teil 1:
Partie 1: Principes généraux - Amendement 1 (ISO 1628- Allgemeine Grundlagen - Änderung 1 (ISO 1628-
1:2009/Amd 1:2012) 1:2009/Amd 1:2012)
This amendment A1 modifies the European Standard EN ISO 1628-1:2009; it was approved by CEN on 13 July 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1628-1:2009/A1:2012: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 1628-1:2009/A1:2012) has been prepared by Technical Committee ISO/TC 61
"Plastics" in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at
the latest by January 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards
...