EN ISO 24034:2005/A1:2008
(Amendment)Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification - Amendment 1 (ISO 24034:2005/Amd 1:2008)
General Information
- Abstract
This standard specifies requirements for classification of wire electrodes, wires and rods for arc welding of titanium and titanium alloys. The classification of the wire electrodes, wires and rods is based on their chemical composition.
- Status
- Withdrawn
- Publication Date
- 14-Jun-2008
- Withdrawal Date
- 30-Sep-2010
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121/WG 3 - Welding consumables
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Oct-2010
- Completion Date
- 01-Oct-2010
- Directive
- Not Harmonized97/23/EC - Pressure equipment
Relations
- Effective Date
- 09-Oct-2010
- Effective Date
- 12-Feb-2026
- Effective Date
- 08-Jun-2022
Get Certified
Connect with accredited certification bodies for this standard
DVS-ZERT GmbH
German welding certification society.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
EWF/IIW (European/International Welding Federation)
International welding personnel certification.
Sponsored listings
Frequently Asked Questions
EN ISO 24034:2005/A1:2008 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification - Amendment 1 (ISO 24034:2005/Amd 1:2008)". This standard covers: This standard specifies requirements for classification of wire electrodes, wires and rods for arc welding of titanium and titanium alloys. The classification of the wire electrodes, wires and rods is based on their chemical composition.
This standard specifies requirements for classification of wire electrodes, wires and rods for arc welding of titanium and titanium alloys. The classification of the wire electrodes, wires and rods is based on their chemical composition.
EN ISO 24034:2005/A1:2008 is classified under the following ICS (International Classification for Standards) categories: 25.160.20 - Welding consumables. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 24034:2005/A1:2008 has the following relationships with other standards: It is inter standard links to EN ISO 24034:2010, ISO 24034:2005/Amd 1:2008, EN ISO 24034:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 24034:2005/A1:2008 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN ISO 24034:2005/A1:2008 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2008
Dodajni materiali za varjenje - Masivne žice in palice za talilno varjenje titana in
titanovih zlitin - Razvrstitev - Dopolnilo 1 (ISO 24034:2005/Amd 1:2008)
Welding consumables - Solid wires and rods for fusion welding of titanium and titanium
alloys - Classification - Amendment 1 (ISO 24034:2005/Amd 1:2008)
Schweißzusätze - Massivdrähte und -stäbe zum Schmelzschweißen von Titan und
Titanlegierungen - Einteilung - Änderung 1 (ISO 24034:2005/Amd 1:2008)
Produits consommables pour le soudage - Fils pleins et baguettes pleines pour le
soudage par fusion du titane et des alliages de titane - Classification - Amendement 1
(ISO 24034:2005/Amd 1:2008)
Ta slovenski standard je istoveten z: EN ISO 24034:2005/A1:2008
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 24034:2005/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2008
ICS 25.160.20
English Version
Welding consumables - Solid wires and rods for fusion welding
of titanium and titanium alloys - Classification - Amendment 1
(ISO 24034:2005/Amd 1:2008)
Produits consommables pour le soudage - Fils pleins et Schweißzusätze - Massivdrähte und -stäbe zum
baguettes pleines pour le soudage par fusion du titane et Schmelzschweißen von Titan und Titanlegierungen -
des alliages de titane - Classification - Amendement 1 (ISO Einteilung - Änderung 1 (ISO 24034:2005/Amd 1:2008)
24034:2005/Amd 1:2008)
This amendment A1 modifies the European Standard EN ISO 24034:2005; it was approved by CEN on 14 June 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24034:2005/A1:2008: E
worldwide for CEN national Members.
Contents Page
Foreword.3
Foreword
This Amendment (EN ISO 24034:2005/A1:2008) has been prepared by Technical Committee ISO/TC 44
"Welding and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding” the
secretariat of which is held by DIN.
This Amendment to the European Standard EN ISO 24034:2005 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2008, and
conflicting national standards shall be withdrawn at the latest by December 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 24034:2005/Amd 1:2008 has been approved by CEN as a EN ISO 24034:2005/A1:2008
without any modification.
INTERNATIONAL ISO
STANDARD 24034
First edition
2005-10-01
AMENDMENT 1
2008-06-15
Welding consumables — Solid wires and
rods for fusion welding of titanium and
titanium alloys — Classification
AMENDMENT 1
Produits consommables pour le soudage — Fils pleins et baguettes
pleines pour le soudage par fusion du titane et des alliages de titane —
Classification
AMENDEMENT 1
Reference number
ISO 24034:2005/Amd.1:2008(E)
©
ISO 2008
ISO 24034:2005/Amd.1:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Syste
...