EN 12098-5:2017
(Main)Energy Performance of Buildings - Controls for heating systems - Part 5: Start-stop schedulers for heating systems - Modules M3-5,6,7,8
General Information
- Abstract
This European Standard applies to scheduling equipment for heating systems. The signals can be processed by using either analogue or digital techniques, or both.
It applies to start-stop scheduling functions and sets minimum acceptable standards for functions, performance and documentation.
NOTE 1 The start-stop function can be integrated within a main control device. In this case, the controller would be expected to this standard for scheduling function.
Safety requirements on heating systems and heating control systems remain unaffected by this European Standard. The actuators and the dynamic behaviour of the valves are not covered in this European Standard. This control equipment may or may not be connected to a data network.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in prEN ISO 52000-1.
NOTE 2 In prCEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 3 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively.
- Status
- Withdrawn
- Publication Date
- 16-May-2017
- Withdrawal Date
- 22-Sep-2026
- Technical Committee
- CEN/TC 247 - Controls for mechanical building services
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 30-Nov-2022
- Completion Date
- 23-Sep-2026
Relations
- Replaces
EN 12098-5:2005 - Controls for heating systems - Part 5: Start-stop schedulers for heating systems - Effective Date
- 13-Nov-2013
- Effective Date
- 07-Dec-2022
- Effective Date
- 22-Jul-2020
- Effective Date
- 28-Jul-2026
- Effective Date
- 07-Jul-2026
- Effective Date
- 07-Jul-2026
- Effective Date
- 09-Jun-2026
- Effective Date
- 20-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
EN 12098-5:2017 is a standard published by the European Committee for Standardization (CEN). Its full title is "Energy Performance of Buildings - Controls for heating systems - Part 5: Start-stop schedulers for heating systems - Modules M3-5,6,7,8". This standard covers: This European Standard applies to scheduling equipment for heating systems. The signals can be processed by using either analogue or digital techniques, or both. It applies to start-stop scheduling functions and sets minimum acceptable standards for functions, performance and documentation. NOTE 1 The start-stop function can be integrated within a main control device. In this case, the controller would be expected to this standard for scheduling function. Safety requirements on heating systems and heating control systems remain unaffected by this European Standard. The actuators and the dynamic behaviour of the valves are not covered in this European Standard. This control equipment may or may not be connected to a data network. Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in prEN ISO 52000-1. NOTE 2 In prCEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation. NOTE 3 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively.
This European Standard applies to scheduling equipment for heating systems. The signals can be processed by using either analogue or digital techniques, or both. It applies to start-stop scheduling functions and sets minimum acceptable standards for functions, performance and documentation. NOTE 1 The start-stop function can be integrated within a main control device. In this case, the controller would be expected to this standard for scheduling function. Safety requirements on heating systems and heating control systems remain unaffected by this European Standard. The actuators and the dynamic behaviour of the valves are not covered in this European Standard. This control equipment may or may not be connected to a data network. Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in prEN ISO 52000-1. NOTE 2 In prCEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation. NOTE 3 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively.
EN 12098-5:2017 is classified under the following ICS (International Classification for Standards) categories: 91.140.10 - Central heating systems; 97.120 - Automatic controls for household use. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12098-5:2017 has the following relationships with other standards: It is inter standard links to EN 12098-5:2005, EN 12098-3:2022, EN 12098-1:2022, EN IEC 60730-2-24:2026, EN IEC 60730-2-15:2026, EN IEC 60730-2-9:2026, EN IEC 60730-2-5:2026, EN IEC 60730-2-12:2026, EN IEC 60730-2-9:2019/A2:2020, EN IEC 60730-2-14:2025, EN IEC 60730-2-22:2020, EN 60529:1991, EN IEC 60730-2-9:2019/A1:2019, EN IEC 60730-2-8:2025, EN IEC 60730-1:2024/A11:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12098-5:2017 is associated with the following European legislation: EU Directives/Regulations: 2010/31/EU; Standardization Mandates: M/480. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12098-5:2017 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Energijske lastnosti stavb - Naprave za regulacijo sistemov za ogrevanje - 5. del: Regulatorji nastavitve zagona in ustavitve sistemov za ogrevanje - Moduli M3-5, 6, 7, 8Energieeffizienz von Gebäuden - Mess-, Steuer- und Regeleinrichtungen für Heizungen - Teil 5: Schalteinrichtungen zur programmierten Ein- und Ausschaltung von Heizungsanlagen - Module M3-5, 6, 7, 8Performance énergétique des bâtiments - Régulation pour les systèmes de chauffage - Partie 5 : Programmateurs d'intermittences pour les systèmes de chauffage - Modules M3-5, 6, 7, 8Energy Performance of Buildings - Controls for heating systems - Part 5: Start-stop schedulers for heating systems - Modules M3-5,6,7,897.120Avtomatske krmilne naprave za domAutomatic controls for household use91.140.10Sistemi centralnega ogrevanjaCentral heating systemsICS:Ta slovenski standard je istoveten z:EN 12098-5:2017SIST EN 12098-5:2018en,fr,de01-maj-2018SIST EN 12098-5:2018SLOVENSKI
STANDARDSIST EN 12098-5:20061DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12098-5
May
t r s y ICS
{ sä s v rä s râ
{ yä s t r Supersedes EN
s t r { zæ wã t r r wEnglish Version
Energy Performance of Buildings æ Controls for heating systems æ Part
wã Startæstop schedulers for heating systems æ Modules M uæ wá xá yá z Performance énergétique des bâtiments æ Régulation pour les systèmes de chauffage æ Partie
w ã Programmateurs d 5intermittences pour les systèmes de chauffage æ Modules M uæ wá
xá
yá
z
Energetische Bewertung von Gebäuden æ Messæá Steueræund Regeleinrichtungen für Heizungen æ Teil
wã Schalteinrichtungen zur programmierten Einæ und Ausschaltung von Heizungsanlagen æ Module M uæ wá
xá
yá
z This European Standard was approved by CEN on
t y February
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s t r { zæ wã t r s y ESIST EN 12098-5:2018
block schematic describing functions in details. SIST EN 12098-5:2018
Over-arching Building (as such) Technical Building System Submodule Descriptions Descriptions Descriptions Heating Cooling Ventilation Humidification Dehumidification Domestic Hot waters Lighting Building automation and control PV, wind, . sub1 M1 M2
M3 M4 M5 M6 M7 M8 M9 M10 M11 1 General General General
2 Common terms and definitions; symbols, units and subscripts Building Energy Needs Needs
3 Application (Free) Indoor Conditions without Systems Maximum Load and Power
4 Ways to Express Energy Performance Ways to Express Energy Performance Ways to Express Energy Performance
5 Building Functions and Building Boundaries Heat Transfer by Transmission Emission and control x
6 Building Occupancy and Operating Conditions Heat Transfer by Infiltration and Ventilation Distribution and control x
7 Aggregation of Energy Services and Energy Carriers Internal Heat Gains Storage and control x
8 Building Partitioning Solar Heat Gains Generation and control x
9 Calculated Energy Performance Building Dynamics (thermal mass) Load dispatching and operating conditions
10 Measured Energy Performance Measured Energy Performance Measured Energy Performance
11 Inspection Inspection Inspection
12 Ways to Express Indoor Comfort
BMS
13 External Environment Conditions
14a Economic Calculation
a The shaded modules are not applicable. SIST EN 12098-5:2018
...