EN 914:2008

SLOVENSKI STANDARD
01-januar-2009
1DGRPHãþD
SIST EN 914:1996
*LPQDVWLþQDRSUHPD%UDGOMDLQGYRYLãLQVNDEUDGOMD=DKWHYHLQSUHVNXVQH
PHWRGHYNOMXþQR]YDUQRVWMR
Gymnastic equipment - Parallel bars and combination asymmetric/parallel bars -
Requirements and test methods including safety
Turngeräte - Barren und kombinierte Stufenbarren/Barren - Anforderungen und
Prüfverfahren einschließlich Sicherheit
Matériel de gymnastique - Barres paralleles et barres paralleles et asymétriques
combinées - Exigences et méthodes d'essai y compris la sécurité
Ta slovenski standard je istoveten z: EN 914:2008
ICS:
97.220.30 Oprema za dvoranske športe Indoor sports equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 914
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2008
ICS 97.220.30 Supersedes EN 914:1996
English Version
Gymnastic equipment - Parallel bars and combination
asymmetric/parallel bars - Requirements and test methods
including safety
Matériel de gymnastique - Barres parallèles et barres Turngeräte - Barren und kombinierte Stufenbarren/Barren -
parallèles/asymétriques combinées - Exigences et Anforderungen und Prüfverfahren einschließlich Sicherheit
méthodes d'essai y compris la sécurité
This European Standard was approved by CEN on 27 September 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 914:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.3
1 Scope.4
2 Normative references.4
3 Requirements.4
3.1 Classification.4
3.2 Dimensions.4
4 Safety requirements.6
4.1 General requirements.6
4.2 Clear path between uprights .6
4.3 Entrapment.6
4.4 Stability.6
4.5 Vertical stiffness and residual deflection.6
4.6 Strength.7
4.7 Rigidity of framework .7
5 Test methods.7
5.1 General.7
5.2 Determination of the clear path between uprights.7
5.2.1 Principle.7
5.2.2 Apparatus.7
5.2.3 Procedure.7
5.2.4 Expression of results.7
5.3 Determination of stability and rigidity .8
5.3.1 Principle.8
5.3.2 Apparatus.8
5.3.3 Test temperature.8
5.3.4 Procedure.8
5.3.5 Expression of results.8
5.4 Determination of stiffness and residual deflection.8
5.4.1 Principle.8
5.4.2 Apparatus.9
5.4.3 Test temperature.9
5.4.4 Procedure.9
5.4.5 Expression of results.9
5.5 Determination of strength.9
5.5.1 Principle.9
5.5.2 Apparatus.9
5.5.3 Test temperature.9
5.5.4 Procedure.9
5.5.5 Expression of results.9
6 Instructions for use .10
7 Marking.10
Annex A (informative) Example of a cross section of equipment.11

Foreword
This document (EN 914:2008) has been prepa
...