EN 3359:2025

SLOVENSKI STANDARD
oSIST prEN 3359:2024
01-september-2024
Aeronavtika - Jeklo X3CrNiMoAl13-8-2 (1.4534) - Taljeno z vakuumsko indukcijo in
pretaljeno s taljivo elektrodo - Mehčano - Materiali za kovanje - a ali D ≤ 300 mm
Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) - Vacuum induction melted and
consumable electrode remelted - Softened - Forging stocks - a or D ≤ 300 mm
Luft- und Raumfahrt - Stahl X3CrNiMoAl13-8-2 (1.4534) -
Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen -
Geglüht - Schmiedevormaterial - a oder D ≤ 300 mm
Série aérospatiale - Acier X3CrNiMoAl13-8-2 (1.4534) - Élaboré sous vide par induction
et refondu à l’électrode consommable - Adouci - Produits destinés à la forge - a ou D ≤
300 mm
Ta slovenski standard je istoveten z: prEN 3359
ICS:
49.025.10 Jekla Steels
oSIST prEN 3359:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 3359:2024
oSIST prEN 3359:2024
DRAFT
EUROPEAN STANDARD
prEN 3359
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2024
ICS 49.025.10 Will supersede EN 3359:2007
English Version
Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) -
Vacuum induction melted and consumable electrode
remelted - Softened - Forging stocks - a or D ≤ 300 mm
Série aérospatiale - Acier X3CrNiMoAl13-8-2 (1.4534) - Luft- und Raumfahrt - Stahl X3CrNiMoAl13-8-2
Élaboré sous vide par induction et refondu à l'électrode (1.4534) - Vakuuminduktionserschmolzen und mit
consommable - Adouci - Produits destinés à la forge – selbstverzehrender Elektrode umgeschmolzen -
a ou D ≤ 300 mm Geglüht - Schmiedevormaterial - a oder D ≤ 300 mm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3359:2024 E
worldwide for CEN national Members.

oSIST prEN 3359:2024
prEN 3359:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9
oSIST prEN 3359:2024
prEN 3359:2024 (E)
European foreword
This document (prEN 3359:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 3359:2007.
prEN 3359:2024 includes the following significant technical changes with respect to EN 3359:2007:
— EN 3359 (P2), 07/2007 – Update of the materi
...