EN 16307-5:2013

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vozila za talni transport - Varnostne zahteve in preverjanje - 5. del: Dodatne zahteve za vozila, ki jih poganja pešecFlurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 5: Zusätzliche Anforderungen für Füßgängergeführte FlurförderzeugeChariots de manutention - Exigences de sécurité et vérification - Partie 5: Exigences supplémentaires pour les chariots à conducteur accompagnantIndustrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks53.060Industrijski tovornjakiIndustrial trucksICS:Ta slovenski standard je istoveten z:EN 16307-5:2013SIST EN 16307-5:2013en,fr,de01-junij-2013SIST EN 16307-5:2013SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16307-5
March 2013 ICS 53.060 English Version
Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
Chariots de manutention - Exigences de sécurité et vérification - Partie 5: Exigences supplémentaires pour les chariots à conducteur accompagnant
Flurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 5: Zusätzliche Anforderungen für mitgängerbetriebene Flurförderzeuge This European Standard was approved by CEN on 10 February 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16307-5:2013: ESIST EN 16307-5:2013

List of significant hazards .8 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EC Directive 2006/42/EC . 10 Bibliography . 11
The machines concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the Scope of this document.
When requirements of this type-C standard are different from those which are stated in type-A or type-B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed and built according to the requirements of this type-C standard.
The EN 16307 series of standards covers safety requirements and their verification for industrial trucks, as defined in ISO 5053, that are not covered exhaustively by the EN ISO 3691 series.
0.2 Assessment of hazards The product needs to be designed in such a way that it is fit for its purpose or function and can be adjusted and maintained without putting persons at risk when used under the conditions foreseen by the manufacturer.
In order to properly design a product and to cover all specific safety requirements, the manufacturer will have to identify the hazards that apply to his product and carry out a ris
...