EN 16121:2013+A1:2017

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Behältnismöbel für den Nicht-Wohnbereich - Anforderungen an die Sicherheit, Festigkeit, Dauerhaltbarkeit und StandsicherheitMeubles de rangement à usage collectif - Exigences pour la sécurité, la résistance, la durabilité et la stabilitéNon-domestic storage furniture - Requirements for safety, strength, durability and stability97.140PohištvoFurnitureICS:Ta slovenski standard je istoveten z:EN 16121:2013+A1:2017SIST EN 16121:2014+A1:2018en,fr,de01-april-2018SIST EN 16121:2014+A1:2018SLOVENSKI
STANDARDSIST EN 16121:20141DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16121:2013+A1
September
t r s y ICS
{ yä s v r Supersedes EN
s x s t sã t r s uEnglish Version
Nonædomestic storage furniture æ Requirements for safetyá strengthá durability and stability Meubles de rangement à usage collectif æ Exigences pour la sécuritéá la résistanceá la durabilité et la stabilité
Behältnismöbel für den NichtæWohnbereich æ Anforderungen an die Sicherheitá Festigkeitá Dauerhaltbarkeit und Standsicherheit This European Standard was approved by CEN on
t { June
t r s u and includes Amendment
s approved by CEN on
t y June
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x s t sã t r s u ªA sã t r s y ESIST EN 16121:2014+A1:2018

Modified requirements for schools, kindergartens and similar applications . 16 A.1 General . 16 A.2 Requirements . 16 A.3 Additional requirements for furniture for kindergartens . 17 Annex B (normative)
Selecting product from a range of furniture . 18 B.1 Range of units . 18 Annex C (informative)
Guidance of test severity in relation to application . 19 SIST EN 16121:2014+A1:2018

Suggested loads for tests not specified in this standard . 20 D.1 Suggested loads for tests not specified in this standard . 20 D.1.1 General . 20 D.1.2 Stability . 20 D.1.2.1 General . 20 D.1.2.2 Suggested stability requirements . 20 D.1.3 Strength and durability . 20 D.1.3.1 General . 20 D.1.3.2 Suggested strength and durability requirements . 21 Bibliography . 22
Key 1 structure of the unit 2 clear height H 3 extension element Figure 1 — Clear height SIST EN 16121:2014+A1:2018

± 5 % of the nominal force; Forces may be replaced by masses. The relationship 10 N = 1 kg may be used. — Velocities: ± 5 % of the nominal velocity; — Masses:
± 1 % of the nominal mass; — Dimensions: ± 1 mm of the nominal dimension; — Angles:
± 2o of the nominal angle. NOTE For the purposes of uncertainty measurement, test results are not considered to be adversely affected when the above tolerances are met. SIST EN 16121:2014+A1:2018

¶
x w r mm. 5.1.2 Determination of centre of gravity The centre of gravity of a component or unit shall be taken as the geometric centre of that unit, except in the case of extension elements, where the geometric centre of the usable volume shall be used. The height of the centre of gravity above the floor shall be measured for storage furniture or their components when installed according to the manufacturer’s instructions. Levelling devices shall be set at their middle position. Height adjustable components shall be placed in their highest position. All wall or top hanging units, or components thereof, are considered to have their centre of gravity more than 650 mm above the floor. 5.1.3 Determination of total mass The total mass is the mass of the component or unit plus the mass supported by it. Unless the component is conspicuously and durably marked by the manufacturer with a maximum load, the mass of the contents shall be determined according to Table 1, which specifies mass per unit area for shelves and the mass per unit volume for extension elements, baskets and trays, etc. The volume of fixed baskets and trays shall be taken as the volume contained below their top edge. The volume of extension elements shall be taken as the area of its bottom multiplied by the clear height (3.6). Table 1 — Load to determine total mass and load applied to all components other than those undergoing test, excluding stability tests Part Unit Load Horizontal surfaces, tops, shelves, door baskets, etc. kg/dm2 1,5 Extension elements, trays and baskets kg/dm3 0,2 Suspended pocket files kg/dm a 4 Clothes rails kg/dm 4 a
Measured perpendicular to the plane of the pocket files. SIST EN 16121:2014+A1:2018
...