EN 1402-3:2003
(Main)Unshaped refractory products - Part 3: Characterization as received
General Information
- Abstract
This standard specifies the methods for the characterization of unshaped refractory materials as received and for checking the homogeneity of a delivery of a product. It is applicable to castables (dense and insulating), gunning materials and mouldables, as defined in ENV 1402-1. Note: A check list of appropriate tests is given in annex A.
- Status
- Withdrawn
- Publication Date
- 14-Oct-2003
- Withdrawal Date
- 30-Nov-2012
- Technical Committee
- CEN/TC 187 - Refractory products and materials
- Drafting Committee
- CEN/TC 187/WG 2 - Unshaped refractory materials
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Dec-2012
- Completion Date
- 01-Dec-2012
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 12-Dec-2012
Frequently Asked Questions
EN 1402-3:2003 is a standard published by the European Committee for Standardization (CEN). Its full title is "Unshaped refractory products - Part 3: Characterization as received". This standard covers: This standard specifies the methods for the characterization of unshaped refractory materials as received and for checking the homogeneity of a delivery of a product. It is applicable to castables (dense and insulating), gunning materials and mouldables, as defined in ENV 1402-1. Note: A check list of appropriate tests is given in annex A.
This standard specifies the methods for the characterization of unshaped refractory materials as received and for checking the homogeneity of a delivery of a product. It is applicable to castables (dense and insulating), gunning materials and mouldables, as defined in ENV 1402-1. Note: A check list of appropriate tests is given in annex A.
EN 1402-3:2003 is classified under the following ICS (International Classification for Standards) categories: 81.080 - Refractories. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1402-3:2003 has the following relationships with other standards: It is inter standard links to ENV 1402-3:1998, EN ISO 1927-3:2012. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1402-3:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Neoblikovani ognjevzdržni izdelki - 3. del: Pripravljeni neoblikovani izdelkiUngeformte feuerfeste Erzeugnisse - Teil 3: Prüfung im AnlieferungszustandProduits réfractaires non façonnés - Partie 3: Caractérisation a l'état de réceptionUnshaped refractory products - Part 3: Characterization as received81.080Ognjevzdržni materialiRefractoriesICS:Ta slovenski standard je istoveten z:EN 1402-3:2003SIST EN 1402-3:2004en01-maj-2004SIST EN 1402-3:2004SLOVENSKI
STANDARDSIST ENV 1402-3:20001DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1402-3October 2003ICS 81.080Supersedes ENV 1402-3:1998English versionUnshaped refractory products - Part 3: Characterization asreceivedProduits réfractaires non façonnés - Partie 3:Caractérisation à l'état de réceptionUngeformte feuerfeste Erzeugnisse - Teil 3: Prüfung imAnlieferungszustandThis European Standard was approved by CEN on 20 June 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1402-3:2003 ESIST EN 1402-3:2004
Summary of tests.14SIST EN 1402-3:2004
...