EN 14286:2004
(Main)Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods
General Information
- Abstract
This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of rolled semi-finished aluminium alloy products intended for tanks for the storage and transportation of dangerous goods, in particular of gasoline and other liquid hydrocarbons.
It applies to hot or cold-rolled strip, sheet and plate with a thickness over 3,0 mm and up to and including 12,0 mm used as a wall material.
NOTE 1 Compliance with the present document does not ensure compliance with national or international regulations. The user of the document is responsible for checking that the material he orders or sells complies with all applicable regulations. Depending on the chemical and physical properties of the dangerous good to be transported or stored, it can be necessary to agree on additional properties or inspection conditions in order to comply with applying regulations.
NOTE 2 Some of the products listed in the present document can be subject to patent or patent applications, and their listing herein does not in any way imply the granting of a licence under such patent right.
CEN/TC 132 affirms it is policy that in the case when a patentee refuses to grant licenses on standardised standard products under reasonable and not discriminatory conditions, then this product shall be removed from the corresponding document.
- Status
- Withdrawn
- Publication Date
- 27-Jul-2004
- Withdrawal Date
- 27-Mar-2007
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 28-Mar-2007
- Completion Date
- 28-Mar-2007
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 14286:2004 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods". This standard covers: This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of rolled semi-finished aluminium alloy products intended for tanks for the storage and transportation of dangerous goods, in particular of gasoline and other liquid hydrocarbons. It applies to hot or cold-rolled strip, sheet and plate with a thickness over 3,0 mm and up to and including 12,0 mm used as a wall material. NOTE 1 Compliance with the present document does not ensure compliance with national or international regulations. The user of the document is responsible for checking that the material he orders or sells complies with all applicable regulations. Depending on the chemical and physical properties of the dangerous good to be transported or stored, it can be necessary to agree on additional properties or inspection conditions in order to comply with applying regulations. NOTE 2 Some of the products listed in the present document can be subject to patent or patent applications, and their listing herein does not in any way imply the granting of a licence under such patent right. CEN/TC 132 affirms it is policy that in the case when a patentee refuses to grant licenses on standardised standard products under reasonable and not discriminatory conditions, then this product shall be removed from the corresponding document.
This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of rolled semi-finished aluminium alloy products intended for tanks for the storage and transportation of dangerous goods, in particular of gasoline and other liquid hydrocarbons. It applies to hot or cold-rolled strip, sheet and plate with a thickness over 3,0 mm and up to and including 12,0 mm used as a wall material. NOTE 1 Compliance with the present document does not ensure compliance with national or international regulations. The user of the document is responsible for checking that the material he orders or sells complies with all applicable regulations. Depending on the chemical and physical properties of the dangerous good to be transported or stored, it can be necessary to agree on additional properties or inspection conditions in order to comply with applying regulations. NOTE 2 Some of the products listed in the present document can be subject to patent or patent applications, and their listing herein does not in any way imply the granting of a licence under such patent right. CEN/TC 132 affirms it is policy that in the case when a patentee refuses to grant licenses on standardised standard products under reasonable and not discriminatory conditions, then this product shall be removed from the corresponding document.
EN 14286:2004 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 14286:2004 has the following relationships with other standards: It is inter standard links to EN 14286:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 14286:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminij in aluminijeve zlitine – Varivi valjani izdelki za rezervoarje za shranjevanje in prevažanje nevarnih snoviAluminium und Aluminiumlegierungen - Schweißbare Walzerzeugnisse für Tanks für Lagerung und Transport von GefahrgutAluminium et alliages d'aluminium - Produits laminés soudables pour réservoirs de stockage et de transport des matieres dangereusesAluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods77.150.10Aluminijski izdelkiAluminium products23.020.10UH]HUYRDUMLStationary containers and tanks13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 14286:2004SIST EN 14286:2004en01-november-2004SIST EN 14286:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14286July 2004ICS 77.150.10English versionAluminium and aluminium alloys - Weldable rolled products fortanks for the storage and transportation of dangerous goodsAluminium et alliages d'aluminium - Produits laminéssoudables pour réservoirs de stockage et de transport desmatières dangereusesAluminium und Aluminiumlegierungen - SchweißbareWalzerzeugnisse für Tanks für Lagerung und Transport vonGefahrgutThis European Standard was approved by CEN on 30 April 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14286:2004: ESIST EN 14286:2004
EN 485-1, Aluminium and aluminium alloys – Sheet, strip and plate – Part 1: Technical conditions for inspection and delivery EN 485-2, Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties EN 485-3, Aluminium and aluminium alloys – Sheet, strip and plate – Part 3: Tolerances on dimensions and form for hot-rolled products EN 485-4, Aluminium and aluminium alloys – Sheet, strip and plate – Part 4: Tolerances on shape and dimensions for cold-rolled products EN 515, Aluminium and aluminium alloys – Wrought products – Temper designations EN 573-3, Aluminium and aluminium alloys – Chemical composition and form of wrought products – Part 3: Chemical composition EN 10002-1, Metallic materials - Tensile testing - Part 1: Method of test at ambient temperature EN 10204, Metallic products – Types of inspection documents EN 12258-1:1998, Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms EN ISO 7438:2000, Metallic materials – Bend test (ISO 7438:1985) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 12258-1:1998 and the foll
...