EN ISO 8130-4:2010

SLOVENSKI STANDARD
01-november-2012
3UDãNDVWLSUHPD]LGHO,]UDþXQVSRGQMHPHMHHNVSOR]LYQRVWL,62
YNOMXþQRVSRSUDYNRP&RU
Coating powders - Part 4: Calculation of lower explosion limit (ISO 8130-4:1992,
including Cor 1:1993)
Pulverlacke - teil 4: Berechnung der unteren Zündgrenze (ISO 8130-4:1992,
einschließlich Cor 1:1993)
Poudres pour revêtement - Partie 4: Calcul de la limite inférieure d'explosibilité (ISO
8130-4:1992, Cor 1:1993 inclus)
Ta slovenski standard je istoveten z: EN ISO 8130-4:2010
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 8130-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2010
ICS 87.040
English Version
Coating powders - Part 4: Calculation of lower explosion limit
(ISO 8130-4:1992, including Cor 1:1993)
Poudres pour revêtement - Partie 4: Calcul de la limite Pulverlacke - Teil 4: Berechnung der unteren Zündgrenze
inférieure d'explosibilité (ISO 8130-4:1992, Cor 1:1993 (ISO 8130-4:1992, einschließlich Cor. 1:1993)
inclus)
This European Standard was approved by CEN on 16 October 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8130-4:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
The text of ISO 8130-4:1992, including Cor 1:1993 has been prepared by Technical Committee ISO/TC 35
“Paints and varnishes” of the International Organization for Standardization (ISO) and has been taken over as
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the
latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 8130-4:1992, including Cor 1:1993 has been approved by CEN as a EN ISO 8130-4:2010
without any modification.
INTERNATIONAL
STANDARD 81304
First edition .
1992-I 2-01
Coating powders -
Part 4:
.
Calculat I on of lower explosion limit
. ’
Pouch-es pour rev&ement 7
Partie 4: Cal& de la limite infbrieure d’explosibilit6
Reference number
IS0 8130-4:1992(E)
IS0 8130-4:1992(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. IS0 collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an Inter-
national Standard requires approval by at least 75 Oh of the member
bodies casting a vote.
International Standard IS0 8130-4 was prepared by Technical Committee
lSO/TC 35, Paints and varnishes, Sub-Committee SC 9, General test
methods for paints and varnishes.
IS0 8130 consists of the following parts, under the general title Coating
powders:
- Part I: Determination of particle size distribution by sieving
- Part 2: Determination of density by gas comparison pyknometer
(referee method)
- Part 3: Determination of density by liquid displacement
pyknometer
- Part 4: Cal&a tion of lower explosion limit
- Part 5: Determination of flow properties of a powder/air mixture
Part 6: Determination of gel time of thermosetting coating powders
-
at a given temperature
- Part 7: Determination of loss of mass on stoving
-
...