EN ISO 16486-3:2025/A11:2025
(Amendment)Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 3: Fittings
General Information
- Abstract
This document specifies the physical and mechanical properties of fittings made from unplasticized polyamide (PA-U) in accordance with ISO 16486-1, intended to be buried and used for the supply of gaseous fuels.
It also specifies the test parameters for the test methods to which it refers.
The ISO 16486 series is applicable to PA-U piping systems, the components of which are connected by fusion jointing and/or mechanical jointing.
In particular, this document lays down dimensional characteristics and requirements for the marking of fittings.
In conjunction with the other parts of the ISO 16486 series, this document is applicable to PA-U fittings, their joints, joints with components of PA-U and joints with mechanical fittings of other materials, and to the following fitting types:
— fusion fittings (electrofusion fittings and butt fusion fittings), and
— transition fittings.
- Status
- Published
- Publication Date
- 29-Jul-2025
- Technical Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Drafting Committee
- CEN/TC 155/WG 34 - Polyamid piping systems for gas supply
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 30-Jul-2025
- Due Date
- 26-Oct-2027
- Completion Date
- 30-Jul-2025
Overview
EN ISO 16486-3:2025/A11:2025 is a European Standard published by CEN that defines requirements for fittings made from unplasticized polyamide (PA-U) used in plastics piping systems for the supply of gaseous fuels. This amendment, prepared by CEN/TC 155, further specifies the physical and mechanical properties, test methods, dimensional characteristics, and marking requirements for PA-U fittings.
The standard is intended for buried piping systems in the supply of natural gas and other gaseous fuels, ensuring reliability, safety, and compatibility with fusion jointing and mechanical jointing techniques. EN ISO 16486-3 is used in conjunction with the other parts of the ISO 16486 series, providing an integrated approach to PA-U piping systems and their components.
Key Topics
- Physical and Mechanical Properties: Defines the requirements that PA-U fittings must fulfill to ensure long-term performance and resistance to stress in underground installations.
- Test Parameters: Specifies the test methods and conditions, referencing ISO 16486-1, for verifying compliance with physical, mechanical, and dimensional properties.
- Dimensional Requirements: Establishes the size, shape, and tolerance criteria for fittings to guarantee proper fit, function, and interchangeability.
- Marking: Lays down mandatory marking requirements for product identification, manufacturing traceability, and compliance with safety standards.
- Types of Fittings Covered:
- Fusion fittings, including both electrofusion fittings and butt fusion fittings
- Transition fittings that enable connections with other materials
Applications
EN ISO 16486-3:2025/A11:2025 is highly relevant across multiple segments of the gas industry, especially for those involved with the design, manufacture, and installation of plastic piping systems. Primary application areas include:
- Natural Gas Distribution Networks: Providing specifications for fittings installed below ground in utility pipelines, ensuring secure and leak-free connections.
- Industrial Gas Supply Systems: Used in factories and industrial plants that require safe, reliable plastic piping for fuel supply.
- Residential and Commercial Installations: Informs standards for buried gas service lines in housing and commercial developments.
- Infrastructure Modernization: Supports the transition from traditional materials to advanced plastic piping, improving durability and maintenance efficiency.
Specifiers, installers, and manufacturers use this standard to ensure that fittings:
- Meet strict safety and performance requirements
- Are compatible with standardized jointing systems, both fusion and mechanical
- Allow for clear product identification and traceability through proper marking
Related Standards
EN ISO 16486-3:2025/A11:2025 is one part of the comprehensive ISO 16486 series covering PA-U piping systems for gas applications. Related standards include:
- ISO 16486-1: General requirements for PA-U piping systems for gaseous fuels
- ISO 16486-2: Pipes, including requirements for material and dimensions
- ISO 16486-4: Fusion and mechanical jointing methods for PA-U systems
- ISO 16486-5: System performance and conformity assessment
Other relevant standards for plastics piping systems and gaseous fuel supply:
- EN 1555 series: Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) systems
- EN ISO 4437 series: PE piping systems for gas supply
- ISO 9080: Long-term hydrostatic strength of thermoplastics
By adhering to EN ISO 16486-3:2025/A11:2025, organizations help ensure consistent installation practices, enhanced safety, and improved interoperability within the natural gas supply infrastructure.
Keywords: EN ISO 16486-3, plastic piping systems, unplasticized polyamide, PA-U, gas supply, fusion jointing, mechanical jointing, buried piping, gaseous fuels, fittings standard, CEN, gas distribution, pipeline safety, ISO 16486 series
Relations
- Effective Date
- 25-Jun-2025
Get Certified
Connect with accredited certification bodies for this standard
DIN CERTCO
DIN Group product certification.
Element Materials Technology
Materials testing and product certification.
ABS Group Brazil
ABS Group certification services in Brazil.
Sponsored listings
Frequently Asked Questions
EN ISO 16486-3:2025/A11:2025 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 3: Fittings". This standard covers: This document specifies the physical and mechanical properties of fittings made from unplasticized polyamide (PA-U) in accordance with ISO 16486-1, intended to be buried and used for the supply of gaseous fuels. It also specifies the test parameters for the test methods to which it refers. The ISO 16486 series is applicable to PA-U piping systems, the components of which are connected by fusion jointing and/or mechanical jointing. In particular, this document lays down dimensional characteristics and requirements for the marking of fittings. In conjunction with the other parts of the ISO 16486 series, this document is applicable to PA-U fittings, their joints, joints with components of PA-U and joints with mechanical fittings of other materials, and to the following fitting types: — fusion fittings (electrofusion fittings and butt fusion fittings), and — transition fittings.
This document specifies the physical and mechanical properties of fittings made from unplasticized polyamide (PA-U) in accordance with ISO 16486-1, intended to be buried and used for the supply of gaseous fuels. It also specifies the test parameters for the test methods to which it refers. The ISO 16486 series is applicable to PA-U piping systems, the components of which are connected by fusion jointing and/or mechanical jointing. In particular, this document lays down dimensional characteristics and requirements for the marking of fittings. In conjunction with the other parts of the ISO 16486 series, this document is applicable to PA-U fittings, their joints, joints with components of PA-U and joints with mechanical fittings of other materials, and to the following fitting types: — fusion fittings (electrofusion fittings and butt fusion fittings), and — transition fittings.
EN ISO 16486-3:2025/A11:2025 is classified under the following ICS (International Classification for Standards) categories: 75.200 - Petroleum products and natural gas handling equipment; 83.140.30 - Plastics pipes and fittings for non fluid use. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 16486-3:2025/A11:2025 has the following relationships with other standards: It is inter standard links to EN ISO 16486-3:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 16486-3:2025/A11:2025 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2025
Cevni sistemi iz polimernih materialov za oskrbo s plinastimi gorivi - Cevni sistemi
iz nemehčanega poliamida (PA-U) z zvari in mehanskimi spoji - 3. del: Fitingi -
Dopolnilo A11
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U)
piping systems with fusion jointing and mechanical jointing - Part 3: Fittings
Kunststoff-Rohrleitungssysteme für die Gasversorgung - Rohrleitungssysteme aus
weichmacherfreiem Polyamid (PA-U) mit Schweißverbindungen und mechanischen
Verbindungen - Teil 3: Formstücke
Systèmes de canalisations en matières plastiques pour la distribution de combustibles
gazeux - Systèmes de canalisations en polyamide non plastifié (PA-U) avec
assemblages par soudage et assemblages mécaniques - Partie 3: Raccords
Ta slovenski standard je istoveten z: EN ISO 16486-3:2025/A11:2025
ICS:
75.200 Oprema za skladiščenje Petroleum products and
nafte, naftnih proizvodov in natural gas handling
zemeljskega plina equipment
83.140.30 Polimerne cevi in fitingi za Plastics pipes and fittings for
snovi, ki niso tekočine non fluid use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 16486-
EUROPEAN STANDARD
3:2025/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2025
ICS 83.140.30; 75.200
English Version
Plastics piping systems for the supply of gaseous fuels -
Unplasticized polyamide (PA-U) piping systems with
fusion jointing and mechanical jointing - Part 3: Fittings
Systèmes de canalisations en matières plastiques pour Kunststoff-Rohrleitungssysteme für die Gasversorgung
la distribution de combustibles gazeux - Systèmes de - Rohrleitungssysteme aus weichmacherfreiem
canalisations en polyamide non plastifié (PA-U) avec Polyamid (PA-U) mit Schweißverbindungen und
assemblages par soudage et assemblages mécaniques - mechanischen Verbindungen - Teil 3: Formstücke
Partie 3: Raccords
This amendment A11 modifies the European Standard EN ISO 16486-3:2025; it was approved by CEN on 11 June 2025.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploi
...