EN 13445-4:2002
(Main)Unfired pressure vessels - Part 4: Fabrication
General Information
- Abstract
This document specifies requirements for the manufacture of unfired pressure vessels and their parts, made of steels, including their connections to non-pressure parts. It specifies requirements for material traceability, manufacturing tolerances, welding requirements, production tests, forming requirements, heat treatment, repairs and finishing operations.
This document does not give provisions for manufacturing requirements for vessels designed using Design by Analysis - Direct Route (DBA) of Annex B of EN 13445-3:2002.
- Status
- Withdrawn
- Publication Date
- 28-May-2002
- Withdrawal Date
- 21-Jul-2009
- Technical Committee
- CEN/TC 54 - Unfired pressure vessels
- Drafting Committee
- CEN/TC 54/WG 54 - D - Manufacture
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 22-Jul-2009
- Completion Date
- 22-Jul-2009
- Directive
- Not Harmonized97/23/EC - Pressure equipmentOJ Ref: C, C 171 OJ Date: 17-Jul-2002
Relations
- Effective Date
- 08-Jun-2022
- Referred By
EN 13831:2007 - Closed expansion vessels with built in diaphragm for installation in water - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 13445-4:2002 is a standard published by the European Committee for Standardization (CEN). Its full title is "Unfired pressure vessels - Part 4: Fabrication". This standard covers: This document specifies requirements for the manufacture of unfired pressure vessels and their parts, made of steels, including their connections to non-pressure parts. It specifies requirements for material traceability, manufacturing tolerances, welding requirements, production tests, forming requirements, heat treatment, repairs and finishing operations. This document does not give provisions for manufacturing requirements for vessels designed using Design by Analysis - Direct Route (DBA) of Annex B of EN 13445-3:2002.
This document specifies requirements for the manufacture of unfired pressure vessels and their parts, made of steels, including their connections to non-pressure parts. It specifies requirements for material traceability, manufacturing tolerances, welding requirements, production tests, forming requirements, heat treatment, repairs and finishing operations. This document does not give provisions for manufacturing requirements for vessels designed using Design by Analysis - Direct Route (DBA) of Annex B of EN 13445-3:2002.
EN 13445-4:2002 is classified under the following ICS (International Classification for Standards) categories: 23.020.30 - Pressure vessels, gas cylinders. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13445-4:2002 has the following relationships with other standards: It is inter standard links to EN 13445-4:2009, EN 13831:2007, EN 378-2:2008+A2:2012, EN 14025:2008, EN 13445-4:2002/A2:2006, EN 13445-4:2002/A3:2009, EN 13445-4:2002/A5:2009; is excused to EN 13445-1:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13445-4:2002 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13445-4:2002 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2002
1HRJUHYDQHWODþQHSRVRGHGHO 3URL]YRGQMD
Unfired pressure vessels - Part 4: Fabrication
Unbefeuerte Druckbehälter - Teil 4: Herstellung
Récipients sous pression non soumis a la flamme - Partie 4: Fabri
...