EN 13035-6:2006

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-outStroji in obrati za proizvodnjo, obdelavo in predelavo ravnega stekla - Varnostne zahteve - 6. del: Stroji za lomljenjeMachines et installations pour la production, le façonnage et la transformation du verre plat - Exigences de sécurité - Partie 6 : Machines a rompreMaschinen und Anlagen für die Herstellung, Be- und Verarbeitung von Flachglas - Sicherheitsanforderungen - Teil 6: BrechmaschinenTa slovenski standard je istoveten z:EN 13035-6:2006SIST EN 13035-6:2007en81.100Equipment for the glass and ceramics industriesICS:SLOVENSKI
STANDARDSIST EN 13035-6:200701-januar-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13035-6June 2006ICS 81.100 English VersionMachines and plants for the manufacture, treatment andprocessing of flat glass - Safety requirements - Part 6: Machinesfor break-outMachines et installations pour la production, le façonnageet la transformation du verre plat - Exigences de sécurité -Partie 6 : Machines à rompreMaschinen und Anlagen für die Herstellung, Be- undVerarbeitung von Flachglas - Sicherheitsanforderungen -Teil 6: BrechmaschinenThis European Standard was approved by CEN on 24 May 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13035-6:2006: E

Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC.14 Bibliography.15
Tables Table 1 — List of significant hazards.7 Table 2 — Individual testing for requirements stated in Clause 5.11

1 Scope 1.1 This European Standard applies for machines for break-out of flat glass including the following steps: transport and positioning, break-out, transport of the cut sizes to the unloading position, leading away of waste flat glass. 1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to machines for the break-out of flat glass when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). Those hazards which are dealt with in EN 619 for conveyors are ex-cepted. This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, the operation and maintenance. Haz-ards from noise are not considered to be significant. 1.3 This European Standard is not applicable to the break-out operation (opening the cut) of cutting ma-chines for laminated glass (see EN 13035-7). 1.4 This European Standard is not applicable to the treatment of waste flat glass such as crushing and/or charging of waste flat glass into bins, containers. 1.5 This European Standard does not apply to the significant hazards of conveyors. If there are specific hazards which arise by the co-operation of conveyors with machines for break-out of flat glass, appropriate measures are specified. 1.6 This European Standard is not applicable to machines for break-out of flat glass which are manufac-tured before the date of publication of this European Standard by CEN. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 294:1992, Safety of machinery — Safety distance to prevent danger zones being reached by the upper limbs EN 418:1992, Safety of machinery  Emergency stop equipment, functional aspects  Principles for design EN 953:1997, Safety of machinery  Guards  General requirements for the design and construction of fixed and movable guards EN 954-1:1996, Safety of machinery  Safety-related parts of control systems  Part 1: General principles for design EN 982:1996, Safety of machinery — Safety requirements for fluid power systems and their components — Hydraulics EN 983:1996, Safety of machinery  Safety requirements for fluid power systems and their components  Pneumatics EN 999:1998, Safety of machinery  The positioning of protective equipment in respect of approach speeds of parts of the human body EN 1037:1995, Safety of machinery  Prevention of unexpected start-up

( ) = Ref. No. from Table A.1 of
Annex A of EN 1050: 1996 Hazards Danger zone/dangerous item Preventive measures: see clause 4.1
Static break-out
4.1.1 (1.1) Crushing of the fingers upwards and downwards moving break-out bar/supporting surface, e.g. table 5.2.1 4.1.2 (1.1) Crushing of hand or fin-gers clamping device/supporting surface, e.g. table 5.2.2 4.1.3 (1.1) Crushing of hand (fingers) downwards moving plunger/glass to be bro-ken 5.2.2 4.2 Dynamic break-out
4.2.1 (1.5) Drawing-in of hand or fin-gers top roller/glass surface 5.3.1 4.3 General requirements
4.3.1 (2.1); (2.2) Electrical direct or indirect contact 5.4.4; 5.4.5; 7.2.7 4.3.2 (3.1) Burns naked flames 5.4.1; 7.2.6 4.3.3 (8.6) Neglecting ergonomic principles; human behav-iour all dangerous movements and items 7.2.4 4.3.4 (10.1) Unexpected overrun by failure of the control sys-tem flat glass falling from the supporting surface by non stopping of conveyors delivering glass to manual unloading stations 5.4.2

( ) = Ref. No. from Table A.1 of
Annex A of EN 1050: 1996 Hazards Da
...