EN 13480-8:2007/A1:2011

SLOVENSKI STANDARD
01-november-2011
Kovinski industrijski cevovodi - 8. del: Dodatne zahteve za cevovode iz aluminija
in aluminijevih zlitin - Dopolnilo A1
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium
alloy piping
Metallische industrielle Rohrleitungen - Teil 8: Zusatzanforderungen an Rohrleitungen
aus Aluminium und Aluminiumlegierungen
Tuyauteries industrielles métalliques - Partie 8: Exigences complémentaires relatives aux
tuyauteries en aluminium en alliages d'aluminium
Ta slovenski standard je istoveten z: EN 13480-8:2007/A1:2011
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 13480-8:2007/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2011
ICS 23.040.01
English Version
Metallic industrial piping - Part 8: Additional requirements for
aluminium and aluminium alloy piping
Tuyauteries industrielles métalliques - Partie 8: Exigences Metallische industrielle Rohrleitungen - Teil 8:
complémentaires relatives aux tuyauteries en aluminium et Zusatzanforderungen an Rohrleitungen aus Aluminium und
alliages d'aluminium Aluminiumlegierungen
This amendment A1 modifies the European Standard EN 13480-8:2007; it was approved by CEN on 24 April 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-8:2007/A1:2011: E
worldwide for CEN national Members.

Contents Page
Foreword .3
1 Modification to Clause 2 .4
2 Modification to Clause 5.8 .4
3 Modification to Table 6.2-2 .5
4 Modification to Clause 8.2.3 .5
5 Modification to Table 8.5-1 .5

Foreword
This document (EN 13480-8:2007/A1:2011) has been prepared by Technical Committee CEN/TC 267
“Metallic industrial piping”, the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN 13480-8:2007 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by January 2012, and conflicting
national standards shall be withdrawn at the latest by January 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is a
...