EN ISO 5211:2001

EN ISO 5211:2001 is a standard published by the European Committee for Standardization (CEN). Its full title is "Industrial valves - Part-turn actuator attachments (ISO 5211:2001)". This standard covers: This European Standard specifies requirements for the attachment of part-turn actuators, with or without gearboxes, to industrial valves. The attachment of part-turn actuators to control valves is in accordance with the requirements of this standard only when subject to an agreement between the supplier and the purchaser. This standard specifies : - flange dimensions necessary for the attachment of part-turn actuators to industrial valves (see Figure 1) or to intermediate supports (see Figure 1) ; - driving component dimensions of part-turn actuators necessary to attach them to the driven components ; - reference values for torques for interfaces and for couplings having the dimensions specified in this standard. The attachment of the intermediate support to the valve is not the subject of this standard. NOTE 1 In this standard the term "valve" may also be understood to include "valve with an intermediate support" (see Figure 1). NOTE 2 When the part-turn actuator is a combination of a multi-turn actuator and a gearbox, the multi-turn actuator attachment to the gearbox should be in accordance with EN ISO 5210.

This European Standard specifies requirements for the attachment of part-turn actuators, with or without gearboxes, to industrial valves. The attachment of part-turn actuators to control valves is in accordance with the requirements of this standard only when subject to an agreement between the supplier and the purchaser. This standard specifies : - flange dimensions necessary for the attachment of part-turn actuators to industrial valves (see Figure 1) or to intermediate supports (see Figure 1) ; - driving component dimensions of part-turn actuators necessary to attach them to the driven components ; - reference values for torques for interfaces and for couplings having the dimensions specified in this standard. The attachment of the intermediate support to the valve is not the subject of this standard. NOTE 1 In this standard the term "valve" may also be understood to include "valve with an intermediate support" (see Figure 1). NOTE 2 When the part-turn actuator is a combination of a multi-turn actuator and a gearbox, the multi-turn actuator attachment to the gearbox should be in accordance with EN ISO 5210.

EN ISO 5211:2001 is classified under the following ICS (International Classification for Standards) categories: 23.060.01 - Valves in general. The ICS classification helps identify the subject area and facilitates finding related standards.

EN ISO 5211:2001 has the following relationships with other standards: It is inter standard links to EN ISO 5211:2017, ISO 273:1979, ISO/R 773:1969, EN ISO 4628-6:2001, EN 1264-4:2001, EN 15081:2007, ISO 5211:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN ISO 5211:2001 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN ISO 5211:2001 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.