EN 13035-11:2006

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stroji in obrati za proizvodnjo, obdelavo in predelavo ravnega stekla - Varnostne zahteve - 11. del: Vrtalni strojiMaschinen und Anlagen zur Herstellung, Be- und Verarbeitung von Flachglas - Sicherheitsanforderungen - Teil 11: BohrmaschinenMachines et installations pour la production, le façonnage et la transformation du verre plat - Exigences de sécurité - Partie 11 : Machines de perçageMachines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines81.100Equipment for the glass and ceramics industries25.080.40VrtalnikiDrilling machinesICS:Ta slovenski standard je istoveten z:EN 13035-11:2006SIST EN 13035-11:2007en01-januar-2007SIST EN 13035-11:2007SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13035-11June 2006ICS 81.100 English VersionMachines and plants for the manufacture, treatment andprocessing of flat glass - Safety requirements - Part 11: DrillingmachinesMachines et installations pour la production, le façonnageet la transformation du verre plat - Exigences de sécurité -Partie 11 : Machines de perçageMaschinen und Anlagen zur Herstellung, Be- undVerarbeitung von Flachglas - Sicherheitsanforderungen -Teil 11: BohrmaschinenThis European Standard was approved by CEN on 24 May 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13035-11:2006: ESIST EN 13035-11:2007

Example of a movable interlocking guard for a drilling machine.14 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC.15 Bibliography.16
Tables Table 1 — List of significant hazards.8
1 Scope 1.1 This European Standard contains the requirements for stationary machines for the drilling of flat glass, using a powered rotating tool. Stationary machines are classified into: a) manual; b) semi-automatic; c) automatic single-head or multi-head; d) fully automatic. 1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to drilling machines for flat glass when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to elimi-nate or reduce risks arising from the significant hazards during commissioning, the operation and mainte-nance. 1.3 This European Standard does not address the safety requirements for conveyor belts, rollers (see EN 619) or other means of transporting the glass to and from the drilling machine (see e.g. EN 13035-5). 1.4 This European Standard is not applicable to drilling machines which are manufactured before the date of publication of this European Standard by CEN. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 294:1992, Safety of machinery — Safety distance to prevent danger zones being reached by the upper limbs EN 418:1992, Safety of machinery — Emergency stop equipment, functional aspects — Principles for design EN 953:1997, Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards EN 954-1:1996, Safety of machinery — Safety related parts of control systems — Part 1: General principles for design EN 983:1996, Safety of machinery — Safety requirements for fluid power systems and their components — Pneumatics EN 999:1998, Safety of machinery — The positioning of protective equipment in respect of approach speeds of parts of the human body EN 1037:1995, Safety of machinery — Prevention of unexpected start-up EN 1050:1996, Safety of machinery — Principles for risk assessment EN 1088:1995, Safety of machinery — Interlocking devices associated with guards — Principles for design and selection SIST EN 13035-11:2007

machining operations are under the control and guidance of the operator.
NOTE During the machining operations, the operator does not come into contact with the workpiece 3.3 automatic machine machine where the workpiece is loaded and unloaded by the operator, but all the intermediate machining
operations are carried out without operator intervention 3.4 fully automatic machine machine where the workpiece is presented to and removed from the tools automatically and all the intermedi-ate machining operations are carried out without intervention of the operator SIST EN 13035-11:2007

measures: see clause 4.1 (1.1) crushing during down stroke of the clamp 5.4; 5.7; 7.3.8 4.2 (1.3) cutting or severing during drilling operation 5.4; 5.7 4.3 (1.4) entanglement during drilling and glass positioning operations 5.4; 5.7 4.4 (1.5) drawing-in or trapping during drilling and glass positioning operations 5.4; 5.7 4.5 (1.6) impact during down stroke of the clamp 5.4; 5.7; 7.3.8 4.6 (1.8) friction or abrasion during drilling operation 5.4; 5.7 4.7 (2.1; 2.2) electrical direct or indirect contact 5.5; 5.8; 5.9; 7.3.5 4.8 (7.1) resulting from contact with or inhala-tion of harmful fluids, gases, mists, fumes and dusts coolants 5.2; 7.3.6 4.9 (7.3) biological and micro-biological (viral or bacterial) coolants 5.2; 7.3.6 4.10 (8.3) neglected use of personal protection equipment all operational phases of the machine 5.8; 7.3.3 4.11 (11) impossibility of stopping in the best possible conditions during operation of the machine 5.6 4.12 (17) ejected objects or fluids during drilling operation 5.2; 5.4 4.13 (10.2) (10.6) unexpected start-up by restoration of energy supply after interruption, errors made by the operator all dangerous movements 5.8; 5.9 4.14 (4.1) noise during drilling operation 5.10; 7.3.2 4.15 (6.5) lasers laser centring device 5.3; 7.2.1; 7.3.65 Safety requirements and/or protective measures 5.1 General Machinery shall comply with the safety requirements and/or protective measures of this clause. In addition, the machine shall be designed according to the principles of EN ISO 12100 for hazards relevant but not significant which are not dealt with by European Standard (e.g. sharp edges). For hazards not covered by this European Standard which are to be reduced by the applications of a B level standard such as EN 294, EN 418, EN 953, EN 983, EN 999, EN 1037, EN 1088, EN 60204-1,
...