EN ISO 180:2000/A2:2013
(Amendment)Plastics - Determination of Izod impact strength - Amendment 2: Precision data (ISO 180:2000/Amd 2:2013)
General Information
- Abstract
2012-10-10 EMA: Draft for // vote received in ISO/CS (see notification of 2012-10-09 in dataservice).
2011-11-03 EMA: Draft for // ENQ received in ISO/CS (see notification of 2011-10-31 in dataservice).
2011-10-27 EMA: ISO decided to launch a second amendment instead of a revision (former ISO ID 52843). WI updated accordingly.
- Status
- Withdrawn
- Publication Date
- 09-Apr-2013
- Withdrawal Date
- 22-Sep-2026
- Technical Committee
- CEN/TC 249 - Plastics
- Drafting Committee
- CEN/TC 249 - Plastics
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 18-Dec-2019
- Completion Date
- 23-Sep-2026
Relations
- Effective Date
- 25-Dec-2019
- Consolidated By
ISO 180:2000/Amd 2:2013 - Plastics — Determination of Izod impact strength — Amendment 2: Precision data - Effective Date
- 12-Feb-2026
- Effective Date
- 08-Jun-2022
Get Certified
Connect with accredited certification bodies for this standard
DIN CERTCO
DIN Group product certification.
Smithers Quality Assessments
US management systems and product certification.
Sponsored listings
Frequently Asked Questions
EN ISO 180:2000/A2:2013 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Plastics - Determination of Izod impact strength - Amendment 2: Precision data (ISO 180:2000/Amd 2:2013)". This standard covers: 2012-10-10 EMA: Draft for // vote received in ISO/CS (see notification of 2012-10-09 in dataservice). 2011-11-03 EMA: Draft for // ENQ received in ISO/CS (see notification of 2011-10-31 in dataservice). 2011-10-27 EMA: ISO decided to launch a second amendment instead of a revision (former ISO ID 52843). WI updated accordingly.
2012-10-10 EMA: Draft for // vote received in ISO/CS (see notification of 2012-10-09 in dataservice). 2011-11-03 EMA: Draft for // ENQ received in ISO/CS (see notification of 2011-10-31 in dataservice). 2011-10-27 EMA: ISO decided to launch a second amendment instead of a revision (former ISO ID 52843). WI updated accordingly.
EN ISO 180:2000/A2:2013 is classified under the following ICS (International Classification for Standards) categories: 83.080.01 - Plastics in general. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 180:2000/A2:2013 has the following relationships with other standards: It is inter standard links to EN ISO 180:2019, ISO 180:2000/Amd 2:2013, EN ISO 180:2000. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 180:2000/A2:2013 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2014
3ROLPHUQLPDWHULDOL8JRWDYOMDQMHXGDUQHåLODYRVWLSR,]RGX'RSROQLOR
1DYDMDQMHQDWDQþQRVWL ,62 $PG
Plastics - Determination of Izod impact strength - Amendment 2: Precision data (ISO
180:2000/Amd 2:2013)
Kunststoffe - Bestimmung der Izod-Schlagzähigkeit - Änderung 2: Angaben zur Präzision
(ISO 180:2000/Amd 2:2013)
Plastiques - Détermination de la résistance au choc Izod - Amendement 2: Données de
fidélité (ISO 180:2000/Amd 2:2013)
Ta slovenski standard je istoveten z: EN ISO 180:2000/A2:2013
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 180:2000/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2013
ICS 83.080.01
English Version
Plastics - Determination of Izod impact strength - Amendment 2:
Precision data (ISO 180:2000/Amd 2:2013)
Plastiques - Détermination de la résistance au choc Izod - Kunststoffe - Bestimmung der Izod-Schlagzähigkeit -
Amendement 2: Données de fidélité (ISO 180:2000/Amd Änderung 2: Angaben zur Präzision (ISO 180:2000/Amd
2:2013) 2:2013)
This amendment A2 modifies the European Standard EN ISO 180:2000; it was approved by CEN on 21 March 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 180:2000/A2:2013: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 180:2000/A2:2013) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.
This Amendment to the European Standard EN ISO 180:2000 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by October 2013, and conflicting
national standards shall be withdrawn at the latest by October 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 180:2000/Amd 2:2013 has been approved by CEN as EN ISO 180:2000/A2:2013 without any
modification.
INTERNATIONAL ISO
STANDARD 180
Third edition
2000-12-15
AMENDMENT 1
2006-12-01
Plastics — Determination of Izod impact
strength
AMENDMENT 1
Plastiques — Détermination de la résistance au choc Izod
AMENDEMENT 1
Reference number
ISO 180:2000/Amd.1:2006(E)
©
ISO 2006
ISO 180:2000/Amd.1:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In ac
...