EN 12452:1999
(Main)Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers
General Information
- Abstract
This European Standard specifies the composition, property requirements and tolerances on dimensions and form for rolled, finned, seamless copper and copper alloy tubes for heat exchangers supplied in the size range from 6 mm up to and including 35 mm outside diameter and from 1 mm up to and including 3 mm wall thickness of the unfinned section with fin height up to and including 1,5 mm. The sampling procedures and the methods of test for verification of conformity to the requirements of this standard are also specified.
- Status
- Withdrawn
- Publication Date
- 20-Jul-1999
- Withdrawal Date
- 15-May-2012
- Technical Committee
- CEN/TC 133 - Copper and copper alloys
- Drafting Committee
- CEN/TC 133/WG 4 - Extruded and drawn products, forgings and scrap
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 16-May-2012
- Completion Date
- 16-May-2012
- Directive
- Not Harmonized97/23/EC - Pressure equipmentOJ Ref: C, C 210 OJ Date: 22-Jul-2000
Relations
- Replaced By
EN 12452:2012 - Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers - Effective Date
- 23-May-2012
- Referred By
EN 50216-9:2009 - Power transformer and reactor fittings - Part 9: Oil-to-water heat exchangers - Effective Date
- 09-Feb-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 12452:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers". This standard covers: This European Standard specifies the composition, property requirements and tolerances on dimensions and form for rolled, finned, seamless copper and copper alloy tubes for heat exchangers supplied in the size range from 6 mm up to and including 35 mm outside diameter and from 1 mm up to and including 3 mm wall thickness of the unfinned section with fin height up to and including 1,5 mm. The sampling procedures and the methods of test for verification of conformity to the requirements of this standard are also specified.
This European Standard specifies the composition, property requirements and tolerances on dimensions and form for rolled, finned, seamless copper and copper alloy tubes for heat exchangers supplied in the size range from 6 mm up to and including 35 mm outside diameter and from 1 mm up to and including 3 mm wall thickness of the unfinned section with fin height up to and including 1,5 mm. The sampling procedures and the methods of test for verification of conformity to the requirements of this standard are also specified.
EN 12452:1999 is classified under the following ICS (International Classification for Standards) categories: 77.120.30 - Copper and copper alloys. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12452:1999 has the following relationships with other standards: It is inter standard links to EN 12452:2012, EN 50216-9:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12452:1999 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12452:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2000
%DNHULQEDNURYH]OLWLQH9DOMDQRQDUHEULþHQHQHYDUMHQHFHYL]DWRSORWQH
L]PHQMHYDOQLNH
Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers
Kupfer und Kupferlegierungen - Nahtlose, gewalzte Rippenrohre für Wärmeaustauscher
Cuivre et alliages de cuivre
...